KAT VR KAT PiSystem Loco Adapter Owner’s Manual

KAT Pisystem Ioco Adapter
Owner’s Manual

KAT PiSystem Loco Adapter

Thank you for purchasing the KAT PiSystem Ioco Adapter.

First and Foremost

The owner’s manual contains all the information you need to install the KAT Pisystem Ioco Adapter. The following symbols are used to indicate crucial information and instructions for the set-up process:
This symbol is a precaution: it usually provides additional information to help with a task, as well as information that applies only to certain situations.
This symbol is a hint, letting you know what might be helpful at that particular point.
This symbol is important: you must complete one or more of installations or settings as described in the manual.
This symbol is a safety warning to remind you to be wary of your personal safety while performing the task, be mindful of this symbol to avert any potential risks.

Declaration

It is the trademark of Hangzhou Virtual and Reality Technology Co., Ltd. All trademarks, product identification and trade names of other companies appearing in this manual are owned by their respective owners. No parts or content of this manual may be
copied or reproduced without the written permission of the company, and may not be shared in any form or used for any commercial or profitable purpose.
The contents of this manual are subject to change due to product upgrades or other reasons.
Our company reserves the right to modify the contents of this manual without any notice or prompt. This manual is intended as a guide only. We do our best to provide accurate information in this manual, but we do not guarantee that the contents of the manual
are completely error free. All statements, information, and recommendations in this manual do not constitute any warranty, express or implied.
For the latest information, please feel free to check out our official website: http://www.katvr.com/

Safety and Health Cautions

To avoid injury or damage to the product, read and follow all installation and operation instructions before using the KAT PiSystem Ioco Adapter. If it is improperly used, potential risks may be triggered.

• This adapter is intended for use by people aged 14 to 60 years; if you do not meet the age requirement, please do not use it.
• Please use this adapter according to proper instructions or under the guidance of a professional to avoid damage. During its use by a minor, a guardian should always be present.
• Be sure to read and follow all product instructions and warnings related to your VR omni-directional platform and VR headset of choice.
• Choking hazard: Do not leave small components that pose a suffocation hazard to children or pets where they can reach.
• Keep the adapter safely away from liquids or containers holding liquids.
• Do not place the adapter near fire or heat sources, nor try to leave it directly exposed to the sun.
• Do not insert items into any openings on the adapter.

If you violate the above cautions or carry out other violations, it may cause personal injury or adverse consequences, and KAT VR will not be responsible.
Those who use this adapter are considered to have full capacity of civil conduct and have complied with the aforementioned matters.

Product Introduction

Product Description
KAT PiSystem for KAT Ioco is a specialized adapter developed by KAT VR. It is capable of synchronizing the motion in VR content with the actual movement by the user. You can walk in the game by walking on the spot.

Product Parameters

Please finish the KAT loco pairing on KAT Gateway at your PC before using.Take out a KAT PiSystem Ioco Adapter and three cables.Locate the mini USB cable (PS4 connecting cable) labeled with the sticker “1” to connect the USB port as shown in the picture.Locate the micro USB cable (controller cable) labeled with the sticker “2” to connect the USB port as shown in the picture.Locate and connect the USB cable to the base of KAT Ioco as shown in the picture.Locate the power cord labeled with “switch” sticker and connect it to the power interface shown in the picture.Locate the power cord labeled with “switch”  sticker and connect it to the power interface shown in the picture.complete the connection as shown in the picture.

First Use Instructions

Wait for one minute or two for the KAT PiSystem Ioco Adapter to start.Before connecting the controller, make sure that the tower and the screen are both in operation and then press the PS button on Dualshock 4.After pressing the button, the screen will show the above picture to indicate the success of adaption.If adaption fails, unplug the power cord and wait for five seconds.And go back to STEP 6 for re-adaptation.Please make sure controller cable is well connected and organized before and during playing VR game that requires controller. You may follow the same way of connecting the headset cable to deal with the controller cable.If any controller or headset cable is twisted and twined before use, please manually unloose it, damage may be caused due to continuous twining.

FAQs

Q I’ve finished connecting all the cables but why doesn’t the button on the controller work?

Please press the PS button for adapting and pairing. If there is no response, please replug the power cord and restart the KAT PiSystem Ioco Adapter.

Q What if the controller still doesn’t work after I restart PS4?

Every time you start PS4, please replug the power cord and restart the KAT PiSystem Ioco Adapter A

Q What should I do when the controller cable accidentally disconnects during gaming?

Reconnect the controller cable to KAT PiSystem Ioco Adapter and press the PS button for adapting. A If there is no response, please replug the power cord and restart the KAT PiSystem Ioco Adapter.

There might be some non-scheduled updates for FAQs, please visit: http://katvr.com/knowledge.html#supportwz for more information.

Contact Information

Company： Hangzhou Virtual and Reality Technology Co., Ltd
Add Room 901, Building 6, No 1818-2, West WenYi Road, Yuhang Street , Yuhang District, Hangzhou, Zhejiang Province, China.
Postal code： 311100
Tel;400-826-0804
E-mail; info@katvr.com
Web; http://www.katvr.com/

References

• KAT VR Omni-Directional VR Treadmills | VR Locomotion Technologies – KATVR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>