sanag G36S True Wireless Stereo Headphones User Guide

June 26, 2024
sanag

sanag G36S True Wireless Stereo Headphones User Guide

Caution and FCC Warning:

Informácie o súlade:

This device complies with part 15 of the FCC Rules. This means that the operation of the device must adhere to specific conditions to prevent harmful interference and accept any received interference.

Hodnotenie vystavenia RF:

The device has been evaluated to meet general RF exposure requirements, ensuring safe usage in terms of radio frequency exposure levels.

Q: What is the significance of meeting general RF exposure requirements?

A: Meeting general RF exposure requirements ensures that the device’s radio frequency emissions are within safe levels, minimizing potential health risks associated with RF exposure.

Product ended view

Key function operation

  • Power on: 1. Open the charging case earphone to automatically power on.
  •  Long press the MFB touch key for 3 seconds manual power on.
  • Shut down: 1. Put the earphone into the charging case and automatically shut down.
  •  Hold down the MFB touch button for about 7 seconds.
  • Pairing: The headset automatically enters the pairing state after it is turned on (and the phone is waiting to be connected).
  • Answer: When a call comes in, click the MFB touch key of the left and right ears.
  • Hang up: During the call, double-click the MFB touch button of the left and right ears.
  • Reject: When a call comes in, press the MFB touch key for 2 seconds.
  • Play / Pause: Click the left and right ear MFB touch keys.
  • Previous: Double click MFB touch button on left ear.
  • Next: Double click MFB touch button on right ear.
  • Volume up: Hit left ear MFB touch key three times.
  • Volume down: Hit the right ear MFB touch key three times.
  • Voice Assistant: Press and hold the ear MFB touch button for about 3 seconds to release the voice assistant and click to exit.
  • Reset headset: When the phone is not connected, press the MFB button of the left and right ears at any time to reset the headset factory Settings, and automatically shut down after successful reset.
                • Game Mode / Music Mode: Hit the MFB button of the left and right ears 4 times to enter the low latency mode, and then switch to the music mode 4 times.
  • Low power alarm: When the headset battery is insufficient, it will prompt a low power alarm tone every 3 minutes.
  • Charging: Put the earphones into the charging case and close the cover, charge the earphones, and the ice blue light will be on for 4 seconds before the light is off.
    Charge the charging box, the ice blue light flashes, and the full ice blue light is on.

Bluetooth connection is successful:

  1. The headset enters Bluetooth mode, and the phone searches for the Bluetooth pairing name “sanag G6S I sanag G6S Al”. Click on the connection.
  2. The headset connects to the device once by default.

FCC

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, it is not guaranteed that a particular installation will be free of interference. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the device and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your dealer or an experienced radio or television technician. Warning: Any changes or modifications to this equipment not expressly approved by the manufacturer could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general requirements for exposure to RF radiation.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals