Disnep ET-0835 Rex Remote Control Figure Instruction Manual
- June 26, 2024
- Disnep
Table of Contents
Disnep ET-0835 Rex Remote Control Figure
Product Information
ET-0835 Toy Story Rex Remote Control Figure
- Size: 420 x 110 mm
- Recommended Age: 8+
Product Overview
The Rex Remote Control Figure is an interactive toy that allows you to
control the movement of Rex, the dinosaur character from Toy Story. It comes
with a remote control for easy operation.
Package Contents
- 1 x Rex Remote Control Figure (15.9cm x 22cm x 33cm)
- 1 x Remote Control (21cm x 5.6cm x 3.5cm)
- 1 x Instruction Manual
- 1(One) Rex Remote Control Figure
- 6.3in. x 8.7in. x 13in. (15.9cm x 22cm x 33cm) . SOME ASSEMBLY REQUIRED
- 1(One) Remote Control
- 8.3in. x 2.2in. x 1.4in. (21cm x 5.6cm x 3.5cm)
- 1(One) Instruction Manual
Specifications
- Frequency: 49 MHz
- FCC ID: 2ADM5-ET-0835-49
- Batteries Required: 3 x AA 1.5V Alkaline Batteries for Rex Remote Control Figure, 2 x AAA 1.5V Alkaline Batteries for Remote Control (Batteries not included)
- Frequency: 49 MHz
- FCC ID: 2ADM5-ET-0835-49
- Rex Remote Control Figure: Requires 3(Three) x AA 1.5V Alkaline Batteries (Not Included)
- Remote Control: Requires 2(Two) x AAA 1.5V Alkaline Batteries (Not Included)
Remote Controller
Usage Instructions
Rex Tail Installation
- Insert the Rex Tail into the back hole of the Rex Remote Control Figure according to the tail direction shown in the image.
- Spin the Rex Tail clockwise and lock it onto the figure.
Standard Control
- Turn on the Rex Remote Control Figure using the power switch.
- Use the remote control to move Rex forward.
- Always pay attention while controlling to avoid losing control.
Note: To avoid losing control, always pay attention when controlling the Rex Remote Control Figure.
Control Rex Remote Control Figure to move forward
Control Rex Remote Control Figure to move backward
Batteries Installation
For Rex Remote Control Figure:
- Unscrew the screw on the battery box cover to open it.
- Insert 3 x AA 1.5V Alkaline Batteries into the battery box following the correct polarity.
- Replace the cover and tighten the screw securely.
For Remote Controller:
- Open the battery box cover on the remote control.
- Insert 2 x AAA 1.5V Alkaline Batteries into the battery compartment with correct polarity.
- Close the cover and secure it with the screw.
Power On/Off
Power On/Off
- Slide the ON/OFF Switch to ON to turn on the Rex Remote Control Figure.
- Slide the ON/OFF Switch to OFF to turn off the Rex Remote Control Figure.
Batteries Installation For Rex Remote Control Figure
To install batteries into the Rex Remote Control Figure, unscrew the screw
on the battery box cover to open the cover. Insert 3(Three) X AA 1.5V Alkaline
Batteries (Not Included) into the battery box. Batteries should be placed as
shown on the diagram. Replace the battery box cover and tighten the screw.
Notice:
When inserting the batteries, you must insert them according to the correct
polarity, the Rex Remote Control Figure won’t function if the batteries are
reversed.
Batteries Installation For Remote Controller
To install batteries into the Remote Controller, unscrew the screw on the
battery box cover to open the cover. Insert 2(Two) X AAA 1.5V Alkaline
Batteries (Not Included) into the battery box. Batteries should be placed as
shown on the diagram. Replace the battery box cover and tighten the screw.
Notice:
When inserting the batteries, you must insert them according to the correct
polarity, the Remote Controller won’t function if the batteries are reversed.
Performance Tips
- Do not drive the Rex Remote Control Figure on grass, sand or go through water.
- Do not drive the Rex Remote Control Figure in windy or rainy weather.
- Do not drive the Rex Remote Control Figure into any sharp object.
- Keep dangers, hair and loose clothing away from Rex Remote Control Figure.
Care and Maintenance
- Always use dry and soft cloth to clean this product.
- Avoid this product from being exposed to sunlight or heat.
- Avoid immersing these toys in water, otherwise, the electronic parts may be damaged.
- Check the product regularly. If any damages are discovered, please stop using it immediately, until it is completely repaired in good working condition.
IMPORTANT: BATTERY INFORMATION
For AA Batteries
- WARNING: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly, and always follow the toy/game and battery manufacturers’ instructions.
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. Always remove weak or dead batteries from the product.
4. Remove the battery if the product is left unused for a long period.For AAA Batteries
- WARNING: TO AVOID BATTERY LEAKAGE
1. The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-[800-222-1222](https://phone.gd/phone/800-222-1222)).
2. Always purchase the correct size and grade of battery most suitable for intended use.
3. Do not mix old and new batteries, alkaline, standard (Carbon – Zinc) or rechargeable (Nickel-cadmium) batteries.
4. Clean the battery contacts and those of the device prior to battery installation.
5. Ensure the batteries are installed correctly with the regard to polarity (+ and -).
6. Always remove batteries if consumed or if product is to be left unused for a long time.Warning
This product is suitable for individuals with operating experience in
remotetoys or those aged 8 years old and above. Please do not put the product
in your mouth to prevent choking hazards from small parts. Avoid inserting
your ngers into available interspaces. Do not engage in rough play with the
product, such as throwing, crashing, or twisting it. Store smaller-sized
product accessories in places that are out of reach of children to prevent
accidents. Avoid placing batteries in areas with high temperatures or exposing
them to heat. When young children are operating the product, it is essential
to ensure that adults are guiding them and maintaining visual control of the
toy for convenient control. When the product is not in use, please switch o
the power supply and remove the batteries. Please note that we cannot be held
responsible for any injuries, property damage, or loss resulting from
incorrect operation during the assembly or use of this product.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
FCC Statement
This device complies with the part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: 2ADM5-ET-0835-49
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made In Shantou, China
Keep All Relevant Information for Future Reference
©Disney/Pixar
www.disney.com
Item# ET-0835
FAQ
Q: What should I do if the toy doesn’t respond to the remote control?
A: Check the battery installation in both the toy and remote control. Make
sure batteries are inserted correctly with the right polarity.
Q: How far can the remote control operate the toy?
A: The remote control operates within a range of approximately 10 meters, but
obstacles may affect signal reception.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>