CONNECTRAC CS3205 Express Kit Spec Installation Guide
- June 27, 2024
- CONNECTRAC
Table of Contents
CS3205 Express Kit Spec
Installation Guide
CS3205 Express Kit Spec
EXPRESS KIT SPEC GUIDE
For installation under carpet tile Express Solution for Power & Data
Express Kits are a grab-and-go solution that conveniently manages both power
and data cables. Our hidden under-carpet option works best under carpet tile
for both retrofit and new construction applications.
Features & Benefits
-
Pre-Wired Power
Features a Receptacle Device that snaps into an Express Power Hub. This Hub is attached to a flexible steel conduit that is pre-wired for simple and quick installation. -
Versatile Data
Data accommodates up to 8 Cat-6 data cables and holds up to 8 customizable keystone modules. -
Low-Profile Transition Ramps
Ramps seamlessly transition the raceway to the floor and meet ADA compliance standards. -
Non-Disruptive Installation
Easy to install and can be cut to size in the field, which allows more work during regular business hours. -
Multiple Entrance Fitting Options.
Draw power from either the standard, in-wall entrance fitting, or draw power from Wiremold® Perimeter Raceways, using Raceway-to-Connectrac Transitions.
HOW IT WORKS
Total System Width: 34”
Total System Height: .65”
Maximum Raceway Length: 15’
COMPONENTS
PRODUCT LISTING
Our Express Kit for installation under carpet tile is a grab-and-go solution
that comes complete with all the accessories you need for installation.
To specify, simply start with a 6’ Express Kit and add on 3’ extensions to
reach your desired raceway length. Recommended not to exceed 15’, as conduit
is 25’.
| Part Number | Description |
|---|---|
| CT.XP.1-06-25.1c | 6’ EXPRESS under carpet kit w/ 25’ single circuit conduit, |
quad receptacle & data device
CT. X P.1 -E X T-03| 3’ Raceway Extension w/ non-powered raceway, tracks, &
ramps
OPTIONAL ACCESSORIES
90˚ CORNER KIT
Allows Raceway to make a 90° turn. Part Number:
CT.XP-AC-C90
Description:
EXPRESS under carpet CORNER. 90 degree complete kit HUBCAP
Covers raceway in lieu of device
Part Number:
CT.C.DHC.1-FX-DG
Description:
Device Hubcap A/V DEVICE
Holds any standard double-gang faceplate.
Part Number:
CT.C.DT3.1-DG
Description:
A/V Device GROMMET
Allows cables to enter/ exit the raceway.
Part Number:
CT.C.DT1F.1-DG
Description:
Data Device Grommet WALL CHANNEL KIT
The Wall Channel Kit comes in two sizes (2’, 12’) and is used when power/data
cabling is running outside the wall. The 2’ Wall Channel Kit is designed to
connect to an existing wall outlet box, while the 12’ Wall Channel Kit is
designed for running conduit up the wall to connect to a junction box. Both
sizes can be cut to size in the field.
| Part Number: | Description: |
|---|---|
| CT.XP-AC-WT-02-SV | 2’ Wall Channel Kit |
| CT.XP-AC-WT-12-SV | 12’ Wall Channel Kit |
VERTICAL WIRE MANAGER
Attaches to any power or data device to manage cabling.
Part Number:
CT. AC-WM V.1-DG
Description:
Vertical Wire Manager ROUGH-IN FRAME
Installed before drywall to provide a rough openingfor cabling.
Part Number:
CT. AC-R I F.1
Description:
Rough-In Frame
WIREMOLD® RACEWAY TRANSITIONS
2400D® Series Raceway Transition
The Raceway Transition Fitting allows the feeding of power and data to the
wireway from a 2400D® Series Raceway mounted on a wall. The steel constructed
transition is available in either a painted Ivory finish or Fog White finish
to match the on-wall raceway.
| Part Number: | Description: |
|---|---|
| V2400CT1 | 2400D Raceway-to-Connectrac Transition Fitting. Surface-mounted. |
Ivory
FW2400CT1| 2400D Raceway-to-Connectrac Transition Fitting. Surface-mounted.
Fog White
4000® Series Raceway Transition
The Raceway Transition Fitting allows the feeding of power and data to the
wireway from a 4000® Series Raceway mounted on a wall. The steel constructed
transition is available in either a painted Ivory finish or Gray finish to
match the on-wall raceway.
| Part Number | Description: |
|---|---|
| G4000CT1 | 4000 Raceway-to-Connectrac Transition Fitting. Surface-mounted. Gray |
| V4000CT1 | 4000 Raceway-to-Connectrac Transition Fitting. Surface-mounted. |
Ivory
RECEPTACLE DEVICE
These components are included with each quad device:
DEVICE INFORMATION
| NAME: | Receptacle Device |
|---|---|
| DESCRIPTION | The Receptacle Device is a 20-amp quad power device available in |
a single-circuit option.
ELECTRICAL LISTING:| US: This device meets UL 111 standards for multioutlet
assemblies. Canada: This device meets CAN/CSA 22.2 No. 62 standards for
surface raceway systems.
DATA DEVICE
These components are included with each data device:
DEVICE INFORMATION
| NAME: | Data Device |
|---|---|
| DESCRIPTION: | The Data Device is customizable and fits up to 8 keystone |
modules.
TECHNICAL INFO
RACEWAY CAPACITY
Alongside the shielded flexible power conduit, the Raceway can accomodate up
to 8 low-voltage cables (data, telecom, AV): 
RACEWAY
DIMENSIONS
Outside Dimensions: 4” x .66”
Inside Dimensions: 3.5” x .43”
WIRING DIAGRAM
Express Kits are single-circuit, pre-wired systems. The flexible conduit
includes a 1/2” knockout fitting and typically connects to a junction box in
the wall or ceiling.
WEIGHT CAPACITY
Connectrac systems are designed to withstand loads up to 1000 pounds.
PARTS LIST – RACEWAY
EXPRESS HUB Specifications
Material
PC Plastic
Country of Origin
Taiwan
Compliance
cULus Listed to US & Canadian Safety Standards
Description
An Express Hub provides power access to the Express Receptacle Device. It
comes pre-wired with an attached length of metallic flexible conduit to
convert mains building power to the Express power system.
| Associated Part Number | Description |
|---|---|
| CT.03-XP-HB.1-25.1c | EXPRESS POWER HUB w/ 25’ attached conduit. Single |
circuit.
PARTS LIST – RACEWAY
POWER / DATA CHANNEL
Description
Power/Data Channels are comprised of Top Covers and Bottom Tracks. Top Covers
conceal and protect the power and data cabling, and are completely hidden
under carpet tile. Bottom tracks are fastened to the floor, house the power
and data cabling, and are available in various lengths (L). Each bottom track
typically holds up to 8 cables.
| Associated Part Number | Description |
|---|---|
| CT.01-DT.1-03 | 3’ DATATRAC. |
| CT.01-DT.1-027 | 2′ 6.5″ [30.5″] DATATRAC. |
| CT.01-TC-FX.1-005 | 5″ TOP COVER: FLEX/EXPRESS. |
| CT.01-TC-FX.1-022 | 2.25’ [26.25”] TOP COVER: EXPRESS. |
| CT.01-TC-FX.1-03 | 3’ TOP COVER: FLEX/EXPRESS. |
RECEPTACLE DEVICE
Description
Express power devices quickly snap into any Express Hub. A Receptacle Device
is a NEMA 5-20R quad power device available in various 4-circuit options.
Specifications
Material
PC Plastic
Color
Dark Gray
Country of Origin
Taiwan
Compliance
cULus Listed to US & Canadian Safety Standards
DATA DEVICE Specifications
Material
PC Plastic
Color
Dark Gray
Country of Origin
China
END RAMPS Description
End Ramps sit at the end of the raceway channel, and help to transition the
flooring material from the raceway to the surrounding flooring.
Specifications
Material
PC Plastic
Country of Origin
China
Compliance
cULus Listed to US & Canadian Safety Standards
SIDE RAMPS Specifications
Material
Moisture-resistant MDF
Country of Origin
United States
Description
Transition Ramps sit adjacent to a raceway, and help to transition the
flooring material from the raceway to the surrounding flooring.
| Associated Part Number | Description |
|---|---|
| CT.02-FM-ER.1 | END RAMP: FLEX/FLEX-MAX end-of-raceway transition ramps. |
| CT.02-FM-SRS.1-03 | 3’ SIDE RAMP SET: FLEX/FLEX-MAX. (2) 3’ sets. [6 linear |
feet/3’ per side].
CT.02-FM-SRS.1-06| 6’ SIDE RAMP SET: FLEX/FLEX-MAX. (2) 6’ sets. [12 linear
feet/6’ per side].
CS3205 | 04.12.2024 |
WWW.CONNECTRAC.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>