Mclntosh MB25 Bluetooth Transceiver Owner’s Manual
- June 27, 2024
- Mclntosh
Table of Contents
Mclntosh MB25 Bluetooth Transceiver
Product Specifications
- Brand: McIntosh
- Model: MB25
- Bluetooth Transceiver
- Compliance: FCC Part 15, IC License-exempt RSS(s), RED Directive
- Safety Information : Cancer and Reproductive Harm, Electric Shock Risk
Product Usage Instructions:
Important Notice:
Do not modify the product. Follow the installation instructions provided in the manual to comply with FCC regulations and RED directive requirements.
Safety Information:
- Read all instructions carefully.
- Keep the product away from water.
- Clean the product with a dry cloth only.
- Avoid placing near heat sources or heat-producing appliances.
- Use only manufacturer-specified attachments and accessories.
- Unplug the AC/DC adapter during lightning storms or extended periods of non-use.
- Refer servicing to qualified personnel if the product is damaged or exposed to moisture.
- Avoid exposure to dripping or splashing liquids.
FAQ
- Q: Can I modify the product for better performance?
- A : No, modifying the product may void FCC and RED directive compliance and could result in hazardous radiation emissions.
- Q: What should I do if liquid spills on the device?
- A: If liquid spills on the device, unplug it immediately and refer servicing to qualified personnel to prevent any damage or safety hazards.
Safety Information
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not use or place near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Only use attachments/accessories specified by the manufacturer including the supplied AC/DC adapter.
- Unplug the supplied AC/DC Adapter during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, the AC/DC Adapter is damaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Do not expose this apparatus to dripping or splashing and that no objects filled with liquids, should not be placed on the equipment.
- This equipment is supplied with AC/DC Adapter with a separate power supply cord or the AC/DC Adapter plugged directly into an a.c. receptacle, they shall remain readily operable. To completely disconnect this equipment from the a.c. mains remove the AC/DC Adapter mains power supply cord from the a.c. receptacle or remove the AC/DC Adapter when it is directly plugged into the a.c. receptacle.
- Working temperature : 0-35o C
- This product is intended for use only with the adapter provided:
- Manufacturer: GOLDEN PROFIT ELECTRONICS LTD.
- Model: GPE013B-050240-Z
- WARNING: Do not expose apparatus to excessive heat such as sunshine, fire or the like. No naked sources such as lighted candles should be placed on the apparatus.
- The rating plate is located at the bottom enclosure of the apparatus.
- Statement for Class B digital device acc. to FCC 15.105 as follows:
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Thank You from All of Us at McIntosh
You have invested in a precision instrument that will provide you with many years of enjoyment. Please take a few moments to familiarize yourself with the features and instructions to get the maximum performance from your equipment.
If you need further technical assistance, please contact your dealer who may be more familiar with your particular setup including other brands. You can also contact McIntosh with additional questions or in the unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance: 607-723-3512
Fax: 607-724-0549
Customer Service: 607-723-3515
Fax: 607-723-1917
Email: support@mcintoshlabs.com
Website :www.mcintoshlabs.com
Please Take A Moment
For future reference, you can write down your serial number and purchase information here. We can identify your purchase from this information if the occasion should arise:
Serial Number: __
Purchase Date: __
Dealer Name: __
Introduction
The MB25 functions as a Bluetooth Receiver or as a Bluetooth Transmitter. The MB25 has been designed to provide a superior Bluetooth connection to equipment that lacks Bluetooth connectivity. The MB25 is a Class 1 Bluetooth device with a transmission range ten times that of a typical Class 2 Bluetooth device (such as most cell phones.) As a receiver, the MB25 employs an extremely sensitive receiver for better reception even from Class 2 devices.
Class 1 Bluetooth can transmit up to ten times the range of Class 2 devices. Class 1 operation can typically be 150 feet (45.7 meters) in ideal conditions with mobile devices. Actual range of Bluetooth Class 1 technology may be affected by physical obstacles as well as the performance of devices with which the MB25 is intended to connect, particularly Class 2 devices. Think of this measure as a point of comparison since the world is not always ideal. As a receiver, the maximum range is determined by the capabilities of both paired devices.
Internal sampling and bit shifting, which can be thought of as sophisticated up-sampling, will enable all digital processing to occur at the highest available speed and resolution. The MB25’s internal DAC processing at 192 kHz is the gentlest way of filtering the audio signal. The digital output will be at 96 kHz for wider compatibility with other DACs.
Bluetooth Transmit and Receive support aptX HD for improved sound quality. Plus aptXTM Low Latency audio improves end-toend speed of audio transmission to keep the sound in sync with the screen. Using two MB25, one as a receiver and the other as a transmitter, provides full wireless aptX HD code and decode bridge.
MB25 Front View
MB25 Rear View
Low Latency/High Definition Preference Button sets a preference for either Low Latency or High Definition connections. If a receiver does not support both protocols, the MB25 will use the available protocol. If both protocols are available on the receiver this button will set the preference of which to use. Low Latency may desirable for video viewing to better sync video and audio. Front Panel indicator LEDs confirm the connected protocol.
Power Control Input and Output on the rear panel send or receive power on/off signals when connected to other McIntosh components. A 3.5 mm stereo mini plug is used for the connection to the Power Input connection, while a TRS cable with Ring open circuit is used for a direct connection to a McIntosh amplifier.
How to Use the MB25
Power the MB25
Use only the supplied AC/DC adapter with the included USB cable to power the MB25.
The DC input labeled DC 5V IN can be found next to the antenna connection in “MB25 Rear View” on page 7. To allow the MB25 to properly reset when powering off and on, please allow 5 to 10 seconds between removing and re-inserting the power cord
Attach the Antenna
Attach the included Bluetooth Antenna to the ANT Connection in the center of the rear panel of the MB25. Tighten the brass nut at the base of the Antenna until finger tight
Entering Discovery Mode
When powered on, the MB25 will automatically search for the last paired
device. After one minute, the MB25 will enter Discovery Mode.
If the MB25 has not been previously paired (or the pairing list has been
erased), the unit will more quickly (10 seconds) enter Discovery Mode.
Discovery Mode is indicated by the LED above the Front Panel Pairing Button
flashing green or blue (single blink on and off). It will stay in Discovery
Mode for 15 minutes.
Pairing to New Devices
The MB25 will pair a previously paired device while in Discovery Mode or press
the Front Panel Pair button to pair with a new device that is also in
Discovery Mode. The process of pairing will happen automatically. When the
MB25 pairs with another device, the Front Panel Button will be solid green or
blue (no longer blinking).
Since you may not be able to see a list of discoverable Bluetooth Devices to
choose from on the device you are trying to connect, it is helpful to not have
any other discoverable devices competing with the MB25 when trying to pair.
After 15 minutes in Discovery Mode, if no pairing occurs, the MB25 will exit
Discovery Mode.
Reset / Clear Paired Devices
To reset the MB25 and clear the pairing list:
- Press and hold the Front Panel Pair Button for 10 seconds.
- The LED of the Front Panel Button will blink, pause and then double blink when reset. Once that happens, release the button.
- Pull out DC USB Power Connector from the rear of MB25 for 10 seconds and then plug it back in.
How to Use the MB25 (continued)
Compatible Bluetooth Audio Codecs
aptX: Supports 48kHz/16-bit LCPM audio data.
- aptX HD : Supports near-lossless 48kHz/24-bit LCPM audio data.
- aptX LL: Supports a Low-Latency audio connection that helps with audio-video synchronization.
- AAC (Advanced Audio Coding): Improved audio quality that is better than MP3.
- SBC (Sub-Band Codec): Good audio quality at medium bit rates.
- Note : Currently only Android devices support aptX codecs. MB25’s configured in Transmitter-Receiver pairs also support aptX. Visit www.aptx.com/products for a complete list of compatible products.
License Information
Trademarks of McIntosh Laboratory, Inc.:
The following are Registered Trademarks of McIntosh Laboratory, Inc. in
multiple jurisdictions around the world: the written McIntosh logo; the
McIntosh Globe logo; the Mc logo; Power Guard; Power Guard Screen Grid Sensor;
Power Guard SGS; LD/HP; Dynamic Power Manager; the 4DPM8 logo; HXD; the HXD
logo; Behind The Sound; Legendary Performance. The following are Trademarks of
McIntosh Laboratory, Inc. in multiple jurisdictions around the world:
Autoformer; Sentry Monitor; Solid Cinch; McIntosh Monogrammed Heatsinks;
Hybrid Drive; DualView; TripleView;
Made of Sound.
The foregoing trademarks, registered and otherwise, are not to be used, reproduced, or registered in any way without the express written permission of McIntosh Laboratory, Inc.
Selecting Receiver or Transmitter Mode
The MB25 can be switch between Receiver (RX) or Transmitter (TX) Mode, but it can only be one of these at a time.
Set the MB25 to the desired mode, either RX or TX, by pushing the RX/TX Button located on the rear of the unit. When the RX/TX Button is depressed (pushed in), the MB25 is in Receiver Mode. When the button is in the released position, the MB25 is in Transmitter Mode. Pushing the RX/TX button will toggle between these two modes.
Transmitter Mode
In the Transmitter Mode (TX), the MB25 will transmit a signal from one of the following inputs:
- Analog Balanced (XLR)
- Analog Unbalanced (RCA)
- Digital Coax
- Digital Optical
Press the Input Select button to connect the desired input. Most devices will auto-pair back with the MB25 upon powering up. To re-connect, quickly press the pairing button. The Front Panel Button above the Pair Button will glow Green in Transmitter Mode if already paired and connected. Only one device is stored in memory while in TX mode.
Receiver Mode
In the Receiver Mode (RX), the MB25 will send a received
Bluetooth signal to ALL these outputs:
- Analog Balanced (XLR)
- Analog Unbalanced (RCA)
- Digital Coax
- Digital Optical
The Front Panel Button will glow Blue in Receiver Mode.
To pair the MB25 to receive from your device:
- RX/TX Button should be in the receive (RX) position (depressed)
- Power On the MB25. Front Panel Button will glow blue. It will begin to blink when in pairing mode
- On the device you wish to connect to the MB25, scan for Available Devices. The MB25 will be listed as “MB25”
- Choose MB25. If asked “Pair with MB25?”, choose OK
- MB25 should be connected for Audio. When successfully paired the Front Panel Button will display as solid blue.
Unsuccessful pairing will display as solid white
You can use the Bluetooth menu of your connected device to disconnect or reconnect the MB25. The MB25 will remember up to six previously paired devices while in RX mode.
Shipping the MB25
When shipping the MB25, it is highly recommended that the unit be packed as it was originally shipped to avoid damage. For this reason, you may wish to save the original box and packing material for your MB25. If you need any of the packing material, you can contact McIntosh Customer Service. Use only packing material that is in good condition and replace any material that has seen better days.
Technical Specifications
The MB25 has been tested and certified for indoor use only.
Bluetooth Version
Bluetooth 5.0
Supported Protocols
A2DP, SBC, AAC, aptX, aptX Low Latency, aptX HD
Digital Input
up to 192kHz 24-bit
Digital Ouput
96 kHz 24-bit
Analog Input and Output
2.5 Vrms maximum
Dimensions
Width is 9.7 inches (24.64cm)
Depth is 3.94 inches (10.01cm)
Height is 2.5 inches (6.35cm)
Shipping Carton Dimensions
Width is 12 inches (30.48cm)
Depth is 8 inches (20.32cm)
Height is 4 inches (10.16cm)
Weight
2.5 pounds (1.2 kg) net, 3.5 pounds (1.6 kg) in shipping carton
FCC Information
(US Customers)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by McIntosh may void your authority, granted by the FCC, to use the product.
CAUTION :
- To comply with FCC RF exposure compliance requirements, a separation distance of at least 20cm must be maintained between this product and all persons.
- This product and its antenna must not be co-located or operating in conjunction with any other antenna Vor transmitter.
COMPLIANCE INFORMATION:
- Product Name: MB25 Bluetooth Transceiver
- Model Number: MB25
- This product contains FCC ID: BWY-MB25
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
Tel. 607-723-3512
IC Information
(Canadian Customers)
PRODUCT:
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
CAUTION:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
This radio transmitter (IC : 2483A-MB25) has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
The antenna used by this product: MB25
Antenna Model/Peak Gain : 380B 3dBi or FS-441 5dBi Manufacturer: Shenzhen
Feihseng Electronics Co., Ltd
RED (EN) Information
DECLARATION OF CONFORMITY
Our products follow the provisions of EC/EU directives:
LVD: 2014/35/EC
EMC: 2014/30/EU
RED: 2014/53/EU
ErP : EC regulation 1275/2008 and its framework
directive 2009/125/EC
RoHS: 2015/863/EU
IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets RED directive requirements. Modification of the product could result in hazardous Radio and EMC radiation.
CAUTION
A separation distance of at least 20cm must be maintained between this product and all persons. This product and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
MADE OF SOUND™
McIntosh Laboratory, Inc.
- 2 Chambers Street Binghamton, NY 13903
- www.mcintoshlabs.com
The continuous improvement of its products is the policy of McIntosh Laboratory, Inc. who reserve the right to improve design without notice.
Printed in the U.S.A.
© 2024 McIntosh Laboratory, Inc.
McIntosh Part No. 24128301
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699
- Phone : 607-723-3512
- www.mcintoshlabs.com
References
- Qualcomm® aptX™ Automotive | Bluetooth® Car Stereos & Receivers
- McIntosh: Home Audio Systems for Music & Home Theater
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>