chicco kaily Car Seat with Base Instruction Manual

Car Seat with Base
Instruction Manual
GR. 0+
0-13Kg

kaily Car Seat with Base

KAILY- CAR SEAT

INSTRUCTIONS FOR USE

IMPORTANT WARNING! KEEP IT FOR FUTURE REFERENCE. IMPORTANT, : READ CAREFULLY THE ENTIRE INSTRUCTIONS BOOKLET BEFORE USE IN ORDER TO AVOID RISKS WHEN USING THE PRODUCT AND STORE IT FOR FUTURE REFERENCE. FOLLOW THESE INSTRUCTIONS CAREFULLY IN ORDER NOT TO COMPROMISE CHILDREN’S SAFETY.
WARNING! BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN. IT IS RECOMMENDED TO DISPOSE OF THESE ITEMS AT AN APPROPRIATE WASTE SORTING COLLECTION POINT, AS REQUIRED BY REGULATIONS IN FORCE.

VERY IMPORTANT! TO BE READ IMMEDIATELY

1.  Read these instructions carefully before installing the product. Prevent anybody from using the product without reading the instructions.

2. Keep this instruction booklet for future use.

3. Each country implements different laws and regulations in terms of safety to carry children inside vehicles. For this reason, contact local authorities for further information.

4. WARNING! According to accident statistics, a vehicle’s rear seat is generally safer than the front seat: therefore, we suggest installing the car seat on the rear seat of the vehicle. In particular, the safer seat is the rear central one, if featuring a 3-point belt: in this case, we suggest positioning the Car seat on the rear central seat.

5. WARNING! HAZARD! Never use this car seat fitted on the front seat of a vehicle with a front airbag; use only if the front airbag is deactivated: check with the car manufacturer or see the owner’s manual of your car for instructions on how to deactivate the airbag.

6. If the child’s car seat is fitted on the front seat of the car (only if the front airbag is not present or has been deactivated), to ensure maximum safety the seat should be pushed as far back as possible while taking into account the comfort of the passenger sitting in the seat directly behind it.

7. Never use this child’s car seat on side-facing or rear-facing car seats.

8. Only fit the child car seat onto seats which are fastened to the car chassis and facing forwards. Make sure that all folding or rotating car seats are always securely fastened in place; if not, they could be dangerous.

9. Pay attention when fitting the child’s car seat into the car in order to avoid the car seat or car door, which may interfere with installation.

10. No car seat can guarantee your child’s total safety in the case of an accident but using this product reduces the risk of serious injuries or death.

11. Serious risks for your child increase, not only in case of an accident but also in other circumstances (e.g. sudden brakes, etc.) if the instructions contained in this manual are not followed carefully: always check that the child’s car seat is secured correctly to the vehicle’s seat.

12. If the child’s car seat is damaged, deformed, or worn out, it must be replaced: it may no longer meet the original safety standards.

13. Do not modify or add any components to the product without the manufacturer’s approval.

14. Do not install accessories, spare parts, or any component not supplied by the manufacturer.

15. Never leave the child unattended in the child’s car seat for any reason.

16. To avoid the risk of the child falling, fasten the child to the Car Seat also during transport by hand.

17. When using the car seat out of the car, it is dangerous to use this product on an elevated surface.

18. Never leave the child’s car seat unsecured in the car as it may hurt or harm the passengers.

19. Never place anything except an approved accessory between the vehicle seat and the child’s car seat or between the child’s car seat and the child: in case of an accident, the child’s car seat may not work properly.

20. It is recommended to cover the child’s car seat if the vehicle is left exposed to direct sunlight.

21. Even if not visible to the eyes, after an accident (even a minor one) the car seat will suffer permanent damages: It must therefore be replaced.

22. Before transporting the child seat by hand, make sure that the child is fastened with the belts and that the handle is correctly locked in the vertical position.

23. Make sure that the child’s car seat is correctly attached to the stroller before placing your child inside.

24. Do not use second-hand Car seats: they may have been structurally damaged and not visible to the naked eye but are still liable to compromise the safety of the product. DO NOT use the product for more than 5 years. After this period, alterations of the materials (e.g., due to exposure to sunlight) may reduce or compromise the product’s effectiveness.

25. Artsana declines all responsibility for any inappropriate use of the product.

26. The seat fabric must only be replaced with another approved by the manufacturer as it forms an integral part of the child car seat. The child car seat must never be used without the fabric cover.

27. Check that the safety harness strap is not twisted to avoid the strap or any parts of the child’s car seat becoming trapped between the car doors, or rubbing against cutting edges. If the safety harness is cut or frayed, it must be replaced.

28. Make sure that no objects or luggage is carried in particular on the rear shelf inside the vehicle, without previously having anchored or positioned them safely: they may injure the passengers in the case of an accident or sudden breaking.

29. Make sure that all the vehicle’s passengers use their safety belts for their own safety also because, during the trip, they may injure the child in case of an accident or sudden braking.

30. On long-distance journeys, make frequent stops. Children get tired easily. Do not remove the child from the child’s car seat while traveling. If your child needs attention, find a safe place and stop.

31. In the first few months after birth, children may have difficulty breathing in a seated position. Avoid leaving children to sleep in the seat until they can lift their heads themselves.

32. Premature babies born before the 37th week of pregnancy can be at risk if placed in a child’s car seat. Newborn babies may have breathing difficulties when seated in the child’s car seat. We recommend consulting your doctor, or the hospital’s staff, for their medical advice on whether your child can be transported in the child’s car seat when leaving the hospital.

33. Make sure that all passengers in the vehicle know how to release the child from the child’s car seat in case of an emergency.
    PRODUCT FEATURES
    The child car seat is approved for “Group 0+”, for the safe transportation of babies from birth up to 13 Kg in weight.
    IMPORTANT WARNING

34. This is a “Universal“ child restraint device. It is approved according to Regulation No. 44.04 series of amendments 04. suitable for general use in vehicles and compatible with most but not all vehicles’ seats.

35. For perfect compatibility, check that the manufacturer of your vehicle has indicated in the manual whether your vehicle foresees the installation of Universal child retention devices for the age group in the object.

36. This child restraint device has been classified as “Universal” under more stringent conditions than those that were applied to earlier designs that do not display this notice.

37. Suitable exclusively to be used in vehicles equipped with 3-point safety harnesses, whether static or with winder, approved according to UN/ECE Regulation no. 16 or other equivalent standards.

38. In case of doubts, contact the manufacturer of the restraint device or your dealer.
    LIMITATIONS ON USE WARNING! Scrupulously observe the following limitations on the use of the product; safety will not be guaranteed otherwise.

39. The weight of the child must not exceed 13 kg.

40. Never use this car seat fitted on the front seat of a vehicle with a front airbag; use only if the front airbag is deactivated: check with the car manufacturer or see the owner’s manual of your car for instructions on how to deactivate the airbag.

WARNING! If it is used in a vehicle equipped with rear safety harnesses with integrated airbags (inflatable seat belts), the interplay between the inflatable portion of the seat belt and this child restraint system could cause serious injury or death. Do not install this child restraint equipment where an inflatable safety harness must be used. The KAILY Child Car Seat features a booster cushion:
WARNING! To ensure maximum child safety, never use the booster cushion for children weighing more than 6 Kg. • The Child Car Seat features a booster cushion to ensure good containment and greater comfort for children from birth to 6 kg in weight. Before fitting the booster cushion, check that the belts are inserted into the lowest slot: this is the only position allowed for use with this accessory.

NECESSARY REQUIREMENTS FOR THE CAR SEAT AND SAFETY BELT

The Child Car Seat can be installed on any front passenger or rear seat, but with the following limitations, the car seat must be: – positioned forward- facing (Fig. 1); – equipped with 3-point safety belts, whether static or with inertia reel (Fig. 2A) WARNING! Never install the child car seat on a car seat that is only equipped with a waist belt (Fig. 2B) ADJUSTING THE SAFETY HARNESS
WARNING! The harness straps must always be adjusted to adapt to the child’s growth phase. Before installing the child’s car seat inside the vehicle, adjust the child’s harness straps to the right height. The correct belt height is slightly below the shoulder level (Fig. 3). The child car seat has 2 height adjustment positions (Fig. 4). The KAILY Child Car Seat features a booster cushion: Before fitting the booster cushion, check that the belts are inserted into the lowest slot: this is the only position allowed for use with this accessory.

INSTRUCTIONS FOR USE
COMPONENTS:
A. Lining
B. Sun canopy
C. Side guides for the horizontal car belt
D. Adjustment belt
E. Harness adjustment button
G. Hand grip
G. Buttons to adjust the handle
H. Stroller fastening/release button
I. Diagonal car safety belt slots
J. Canopy hooks
K. Canopy buttons
L. Comfort kit (two shoulder and crotch straps)
M. Safety harness
N. Safety harness buckle
O. Buckle opening button
P. Base
Q. Guide
R. Rebound bar
NB: The images and instructions in this manual refer to the car seat version. Some of the components and functions described here may vary depending on the model purchased.
CONTENTS

• Adjusting the safety harness height
• Fastening the child’s car seat inside the vehicle
• Placing the child
• Adjusting the handle
• Rocker position (use as a baby reclined cradle)
• Removing the child’s car seat cover
• Fastening the child’s car seat on the stroller

ADJUSTING THE SAFETY HARNESS HEIGHT

1. Unfasten the safety harness by pressing the red button on the buckle (Fig. 5).

2. Remove the two shoulder straps from the belts and the two ends of the safety harness as shown in Figure 6.

3. Remove the two parts of the belt from the back of the seat and fit them again through the slot most suited to the height of the child (Fig. 7).

4. Insert the shoulder straps, if any, again.
   FASTENING THE CHILD’S CAR SEAT INSIDE THE VEHICLE

5. Position the handle of the child’s car seat vertically by pressing the two side adjustment buttons (Fig. 8).

6. Position the child’s car seat on the car seat where you intend to install it (Fig. 9).

7. Pull the car’s safety belt and fasten it in the relevant buckle by passing the waist belt through the two blue guides on the side of the Child’s Car Seat (Fig. 10).

8. Hold the chest belt and pull it, tensioning the waist belt (Fig. 11). At the end of the operation, check that the waist belt is always in the relevant blue belt guides.

9. Always keeping the chest belt tensioned, pass it through the blue guides on the back of the backrest (Fig. 12). Pull the belt as tightly as possible without leaving any slack and make sure it is not twisted.
   WARNING! After installing the child’s car seat, always check that the vehicle safety belt is tightened and that the buckle does not force the belt to come out of the relevant slot. Also, check that the buckle of the car belt is not in contact with the point of passage of the belt on the child’s car seat. These situations may compromise the effectiveness of the child’s car seat in the event of an accident.
   WARNING! Never fit the seat belt in any way not mentioned in this instruction booklet, as it would compromise the child’s safety!
   INSTALLING THE CHILD CAR SEAT WITH A STANDARD BASE
   The standard Kaily base can be supplied or purchased separately as an accessory. The base consists of two pieces: the main structure and the rebound bar (Fig. E). Before installing it in the car, fasten the rebound bar to the main structure by inserting it in the appropriate seats until you hear it “click” into place (Fig. 13).
   WARNING: once the rebound bar is fastened to the base, it is no longer possible to remove it.
   WARNING: the base must always be used with the rebound bar attached To install the child car seat with a base on the vehicle seat, proceed as follows:

10. Position the base on the chosen vehicle seat. Position it as seen in Fig. 14, in order to touch the vehicle seat’s backrest.

11. Pull the vehicle safety belt and fasten it to the relevant buckle, inserting the horizontal (waist) part of the belt through the two blue slots (Q) marked by the blue arrow and pull it as tightly as possible (Fig. 15).

12. Attach the child’s car seat on the base (rear facing) and push it down until you hear it click into place (Fig. 16).

13. Check that the child’s car seat is correctly fitted on the base by lifting the front and rear sections. If it does not attach, press the H release button (Fig. 18) and repeat the process.

14. Pull the diagonal car safety belt and thread it through the relevant slot (I) on the back of the child’s car seat’s backrest (Fig. 17).
    WARNING! When traveling by car, this diagonal safety belt must ALWAYS be threaded through this slot.

15. Pull the belt as tightly as possible without leaving any slack and make sure it is not twisted
    WARNING! After installing the child car seat, ALWAYS check that the vehicle safety belt is tightened properly along the entire length of the belt and that no parts are twisted. NEVER fit the car safety belt in any other way not mentioned in these instructions. To remove the child’s car seat leaving the base on the vehicle seat:

16. Unthread the diagonal belt through the guides in the backrest without removing it from the buckle.

17. Remove the child’s car seat as illustrated in Fig. 18.
    POSITIONING THE CHILD
    

18. Press the aluminum button on the front part of the Child Car Seat (covered by the fabric) and loosen the two shoulder straps on the Child Car Seat while holding it down (Fig. 19).

19. Unfasten the fastening buckle of the safety harness, by pressing the red button (Fig. 20).

20. Place your child in the child car seat and then fasten the safety harness (Fig. 21). The shape of the forks is designed so that it does not allow inserting one of the two forks in the buckle; they both need to be overlapped before inserting in the buckle.

21. Adjust the tension of the child’s safety harness by pulling on the relevant adjustment belt (Fig. 22) making sure not to tighten the child too much.

ADJUSTING THE HANDLE

The child car seat handle can be adjusted to 3 different positions:
– Carrying position (Fig. 23)
– Rest position (Fig. 24)
– Baby reclined cradle stabilizer position (Fig. 25) To switch from one position to another, press the two buttons on the lateral joints of the handle.
ROCKER POSITION (USE AS BABY Reclined cradle ) When the child’s car seat is not used in a car, it can be used as a rocker or baby reclined cradle. To make it rock, position the handle in the rest position. To make it stationary, position the handle in the baby-reclined cradle stabilizer position.
WARNINGS

• WARNING : Age range intended for use: from birth to 9 kg (6 months).
• WARNING : Never leave the child unattended
• WARNING : Do not use the reclined cradle once your child can sit unaided, roll over or stand up pushing on their hands, knees, and feet.
• WARNING : This reclined cradle is not intended for prolonged periods of sleeping
• WARNING : It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
• WARNING : Always use the restraint system.
• Always use the restraint system when your child is in the baby reclined cradle; adjust the length of the straps as necessary.
• WARNING : The baby reclined cradle does not replace a bed or a crib. Then it should be placed in a suitable bed or cradle.
• WARNING : Do not use the baby reclined cradle if any components are broken or missing
• WARNING : Do not use accessories or replacement parts other than those approved by the manufacturer
• Do not use the reclined cradle with more than one child at a time.
• Never leave the reclined cradle on surfaces that are not perfectly horizontal.
• Always supervise children playing near the reclined cradle.
• To prevent fire hazards, do not leave the reclined cradle near sources of heat, electrical or gas devices, etc.
• Make sure that the cover is properly secured to the structure of the chair.
• WARNING : Before lifting and carrying the reclined cradle, always bring back and lock the handle in the vertical position “B”.
• Periodically check for any worn parts, loose screws, or worn or unstitched materials, and replace any damaged parts immediately.
• Do not place the reclined cradle with your child in it near windows or walls where strings, curtains, or other objects could be used by the child to climb or pose choking or strangling hazards.
• To avoid the risk of your child overbalancing and falling do not place the reclined cradle near windows or walls.
• Keep the product out of reach of children when it is not being used.

CARE AND MAINTENANCE

• This product requires periodical maintenance. The cleaning and maintenance of the product must only be carried out by an adult. Periodically inspect the baby reclined cradle to check for broken, torn, or missing parts: do not use it in this case.
• The belts, buckle, and plastic parts need to be cleaned only with a damp cloth. Do not use solvents or detergents that may damage or make them unsafe.
• Do not immerse the child’s car seat in water; dry the metal parts to avoid rusting.
• Please refer to the care label for instructions on washing the fabric:

| Handwash in cold water
---|---
| Do not bleach
| Do not tumble dry
| Do not iron
| Do not dry clean

• Check that the fabric and stitching are in good condition each time you wash it.
• Prolonged exposure to direct sunlight can cause the fabric to fade.

REMOVING THE FABRIC FROM THE CHILD’S CAR SEAT

The lining of the child’s car seat is washable. To perform this operation, you need to remove the structure of the child’s car seat.

1. Move the handle to a vertical position and remove the hood by releasing it from the relevant hooks and buttons (Fig. 26).

2. Release the plastic flaps located near the handle joints with the belts unfastened (Fig. 27).

3. Pull off the lining from the front of the seat, taking care to remove the lining at the belt adjustment button (Fig. 28); release the fabric from the belt guides (Fig. 29).

4. Lift the fabric from the back of the child’s car seat, and pull off the shoulder straps and crotch strap from the fabric.

5. To fit the lining on the child’s car seat again, repeat the steps described above in reverse order.
   FASTENING THE CHILD’S CAR SEAT ON THE STROLLER
   

6. To fasten the Child’s Car Seat, remove the stroller or carrycot seat, if present.

7. Hold the handle in the transport position (Fig. 30) and position the Child’s Car Seat on the lateral hooks of the stroller with the foot zone facing rearward. Ease it on the frame until you hear a click (Fig. 31).
   WARNING : Before use, ensure that the Child’s Car Seat is properly fastened by pulling up on it. If it does not attach, press the H release button (Fig. 32) and repeat the process.

8. To release the Child’s Car Seat from the stroller, put the handle in the vertical position (transport), push the button located on the back of the backrest, and lift it up from the frame (Fig. 32).
   WARNING : The fastening and releasing operations can be carried out also with your child inside the car seat; however, the child’s weight may make these operations more difficult. Pay attention when carrying out the above- mentioned operations.
   WARRANTY The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions. The warranty shall not, therefore, apply in the case of damage caused by improper use, wear, or accidental events. For the duration of the warranty on conformity defects please refer to the specific provisions of applicable national laws in the country of purchase, where appropriate.

ARTSANA UK Ltd.
2nd Floor
1 Imperial Place
Maxwell Road
Borehamwood
Hertfordshire – WD6 1JN
01623 750870 (office hours)
www.CHICCO.uk.com| ARTSANA S.p.A.
Via Saldarini Catelli, 1
22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.CHICCO.com
---|---

ARTSANA S.p.A. – Via Saldarini Catelli, 1 – 22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111 – Fax (+39) 031 382 400 –www.chicco.com

References

• Site Officiel Chicco Belgique | Chicco.be
• Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
• Official Corporate Chicco website
• Tienda para bebés y recién nacidos | Chicco Argentina
• Site Oficial Chicco Brasil
• Chicco México
• Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
• Productos Bebés y Niños | Chicco.es
• Site Officiel Chicco France | Chicco.fr
• Best baby products in India | Infant care products online Chicco India
• Chicco.pl | Wszystko dla dziecka: łóżeczka, wózki, krzesełka, zabawki i akcesoria dla niemowląt
• Chicco Portugal - Puericultura, Roupa e Brinquedos
• Официальный сайт Chicco Россия
• UK.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>