ECOTECH OTM-ARM-L Multi Light Arm Kit Installation Guide

: June 27, 2024
: Ecotech

Table of Contents

OTM-ARM-L Multi Light Arm Kit
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OTM-ARM-L
INSTALATION INSTRUCTIONS

OTM-ARM-L Multi Light Arm Kit

Use to:

Mount 2, 3 or 4 x AI Blade LED lights on the D-D OTM Rail. Requires AI Blade clips (not supplied).
Suspend 2, 3 or 4 x AI Blade LED lights on the D-D Wire Kit (AIWIRE05). Requires AI Blade clips (not supplied).
Hybrid mount 2 x AI Blade LED lights alongside AI Hydra 26/32/52/64 LED Lights on the D-D OTM Rail. Requires AI Blade clips (not supplied).
Hybrid mount 2 x AI Blade LED lights alongside Radion XR15/30 LED Lights on the Ecotech RMS Rail. Requires AI Blade clips (not supplied).

OTM-ARM-L Set includes
2 x 330mm Shaped Metal Arms

| 4 x 8mm Black Hole Caps
---|---
| 2 x M5x12mm Black CSK Screw
| 2 x M5x16mm Black CSK Screw
| 4 x Hydra Heatsink Screw
| 2 x M5x20mm Flange Head Screw
| 2 x M5 Nylon Washer
| 2 x M5 Washer
| 2 x M5 Nyloc Nut
| 2 x M5 Low Proﬁle Square Nut

Suspending 3 x AI Blade LED Lights using AIWIRE05 and Blade Clips
Hole caps must be installed when suspending the OTM-ARM to stop the hanging wire from coming free.
The hole caps are a ght ﬁt, submerging them in warm, not hot, water for a minute can help with installaon. Mounng 3 x AI Blade LED Lights on the OTM RAIL with Blade Clips Suspending 4 x AI Blade LED Lights using AIWIRE05 and Blade Clips
Hole caps must be installed when suspending the OTM-ARM to stop the hanging wire from coming free.
The hole caps are a ght ﬁt, submerging them in warm, not hot, water for a minute can help with installaon. Mounng 4 x AI Blade LED Lights on the OTM RAIL with Blade Clips

Hybrid Mounng 2 x AI Blade LED lights on D-D OTM RAIL or RMS Rail Using Blade Clips

Please note: AI Blade LED lights are mounted to the OTM or RMS rail independently of the Hydra / Radion lights when hybrid mounng.
AI Hydra lights (H32/H64 latest version) will use the OTM-ARM-S included with the OTM RAIL set and Radion lights will need to be mounted to the RMS rail with the relevant X Slide Bracket.