MOKO TECHNOLOGY B2 Smart Wearable Badge User Manual
- October 30, 2023
- Moko Technology
Table of Contents
MOKO TECHNOLOGY B2 Smart Wearable Badge
Product Information
The Staff Duress & Panic Alerting B2 Smart Wearable Badge is a smart bluetooth badge designed for emergency situations. It comes with an SOS button and a high-capacity battery, in the form of a holder so that you can combine the ID card and BLE communication in an all-in-one fit. It also has remote reminder and alerts response that can interact with the varied LED notification and buzzer mechanisms. This allows for Geo-fence alerts and restriction entrance alerts. The key selling points of this product include IP66 waterproof, 4-year battery life, and instant SOS alerts.
General Specifications
- Connectivity: BLE 5.0
- Color: Body – White, I Button – Blue (color customizable)
- Weight: 50g
- Battery capacity: 800mAh | Non-replaceable
- Sensor: Accelerometer sensor | Buzzer
- Transmission range: 150m (In an open area without obstacles)
- RFID: HF | LF/UHF (customizable)
- Dimensions: 98×65.18×8.55mmcwith button 98×65.18×7.95mm
- Material: PC
- IP Rating: IP66
- Operating temperature: -20/+60
- Installation: Lanyard
- Suitable card size: CR80 IC Card
Application Scenarios
- Enlarged textured Button
- Buzzer notification
- Pull-out type
- Healthcare
- Constructions
- Smart office
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Product Usage Instructions
- Attach the Staff Duress & Panic Alerting B2 Smart Wearable Badge to your lanyard.
- Insert your CR80 IC Card in the holder to combine the ID card and BLE communication in an all-in-one fit.
- Press the SOS button in case of an emergency to send an instant SOS alert.
- If you are within 150m of an open area without obstacles, your alert will be transmitted to the appropriate response team.
- The varied LED notification and buzzer mechanism will allow for a remote reminder and alert response, including Geo-fence alerts and restriction entrance alerts.
- B2, a smart bluetooth badge with SOS button and high-capacity battery, in the form of a holder so that you can combine the ID card and BLE communication in all-in-one fit.
- Additionally, remote reminder and alerts response can also be acheived to interact with the varied
- LED notification and buzzer mechanism, thus realizing the Geo-fence alerts and restriction entrance alerts.
Key selling points
General specs
- Connectivity: BLE 5.0
- Color: Body – White I Button – Blue (color customizable)
- Weight: 50g
- Battery capacity: 800mAh | Non-replaceable
- Sensor: Accelerometer sensor | Buzzer
- Tran s mission range: 150m (In open area without obstacles)
- RFID: HF | LF/UHF (customizable)
- Dimensions: 98×65.18×8.55mm（with button）
- 98×65.18×7.95mm
- Material: PC
- IP Rating: IP66
- Operating temperature: -20℃/+60℃
- Installation: Lanyard
- Suitable card size: CR80 IC Card
Application scenarios
Healthcare
- Duress calling
- Restriction access
- Location awareness
Constructions
- Detect near-misses
- Geo-fence alerts
- Instant SOS alerts
Smart office
- Visitor flow management
- Access control
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communica-tions.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MOKO TECHNOLOGY LTD.
Documents / Resources
| MOKO
TECHNOLOGY B2 Smart Wearable
Badge
[pdf] User Manual
B2 Smart Wearable Badge, B2, Smart Wearable Badge, Wearable Badge, Badge
---|---