Ecotech AIWIRE05 Otm Arm Flat Instruction Manual

: June 26, 2024
: Ecotech

Table of Contents

Ecotech AIWIRE05 Otm Arm Flat

Product Specifications

Model: OTM-ARM-FLAT
Compatibility: Ecotech RMS Rail (Requires AI Blade clips – not supplied)
Includes:
- 2 x 330mm Flat Metal Arms
- 4 x 8mm Black Hole Caps
- 2 x M5x12mm Black CSK Screw
- 2 x M5x16mm Black CSK Screw
- 4 x Hydra Heatsink Screw
- 2 x M5x20mm Flange Head Screw
- 2 x M5 Nylon Washer
- 2 x M5 Washer
- 2 x M5 Nyloc Nut
- 2 x M5 Low Profile Square Nut

Product Usage Instructions

Suspending AI Blade LED Lights Using Blade Clips

To suspend 3 or 4 AI Blade LED Lights using AIWIRE05 and Blade Clips:

Install the required number of Black Hole Caps to prevent hanging wires from coming free.
Submerge the hole caps in warm water for a minute to facilitate installation.

Mounting AI Blade LED Lights on the OTM Rail with Blade Clips

To mount 3 or 4 AI Blade LED Lights on the OTM Rail with Blade Clips:

Follow the instructions for suspending the lights as mentioned above.

Hybrid Mounting AI Blade LED Lights on D-D OTM Rail or RMS Rail Using Blade Clips

To hybrid mount 2 AI Blade LED lights on D-D OTM Rail or RMS Rail using Blade Clips:

Note that AI Blade LED lights are mounted independently of Hydra/Radion lights.
AI Hydra lights (H32/H64 latest version) should use the OTM-ARM-S included with the OTM RAIL set.
Radion lights need to be mounted to the RMS rail with the relevant X Slide Bracket.

FAQ

Q: Can I use the OTM-ARM-FLAT with any other rail systems?
- A: The OTM-ARM-FLAT is specifically designed for use with the Ecotech RMS Rail and may not be compatible with other rail systems.
Q: How do I ensure the hanging wires do not come free when suspending the lights?
- A: Install the provided Black Hole Caps and consider submerging them in warm water for easier installation.

INSTALATION INSTRUCTIONS

Use to:

Mount 2, 3 or 4 x AI Blade LED lights on the D-D OTM Rail. Requires AI Blade clips (not supplied).
Suspend 2, 3 or 4 x AI Blade LED lights on the D-D Wire Kit (AIWIRE05). Requires AI Blade clips (not supplied).
Hybrid mount 2 x AI Blade LED lights alongside AI Hydra 26/32/52/64 LED Lights on the D-D OTM Rail. Requires AI Blade clips (not supplied).
Hybrid mount 2 x AI Blade LED lights alongside Radion XR15/30 LED Lights on the Ecotech RMS Rail. Requires AI Blade clips (not supplied).

OTM-ARM-FLAT Set includes

Suspending 3 x AI Blade LED Lights using AIWIRE05 and Blade Clips

Hole caps must be installed when suspending the OTM-ARM to stop the hanging wire from coming free.
The hole caps are a Ɵght fit, submerging them in warm, not hot, water for a minute can help with installaƟon.

MounƟng 3 x AI Blade LED Lights on the OTM RAIL with Blade Clips

Suspending 4 x AI Blade LED Lights using AIWIRE05 and Blade Clips

Hole caps must be installed when suspending the OTM-ARM to stop the hanging wire from coming free.

The hole caps are a tight fit, submerging them in warm, not hot, water for a minute can help with installation.

MounƟng 4 x AI Blade LED Lights on the OTM RAIL with Blade Clips

Hybrid MounƟng 2 x AI Blade LED lights on D-D
OTM RAIL or RMS Rail Using Blade Clips

Please note : AI Blade LED lights are mounted to the OTM or RMS rail independently of the Hydra / Radion lights when hybrid mounting.
AI Hydra lights (H32/H64 latest version) will use the OTM-ARM-S included with the OTM RAIL set and Radion lights will need to be mounted to the RMS rail with the relevant X Slide Bracket.