GARMIN 190-03009-19_0A Force Kraken Trolling Motor Instructions
- June 25, 2024
- Garmin
Table of Contents
**GARMIN 190-03009-19_0A Force Kraken Trolling Motor Instructions
**
Printing a Mounting Template
It is not recommended that you print a mounting template on your own. Use the
template that came in the product box.
If you do print the template, you must follow these instructions for printing
a mounting template precisely. To print large templates, you need large enough
paper and printer. Failure to have the correct sized paper and printer, or a
failure to follow these instructions, may result in an incorrectly sized
template and therefore an incorrect cutout (too large or too small) on the
mounting surface of your boat.
NOTE : The options and locations of the options differ between Adobe
Acrobat versions and other PDF viewing/printing applications. Be sure the
scaling is 100% before printing.
-
Select File > Print.
-
Enter 2 in Pages to Print ➊.
-
Select Actual Size➋ for Page Sizing & Handling.
-
Verify that the paper size is larger than the template ➌.
In this example, the paper is not larger than the template. -
If the paper size is not large enough, select Properties ➍ and select a Paper Size that is larger than the template.
-
After printing the template, use a ruler to measure at least one dimension line to ensure the template printed to 100% scale.
-
NOTICE
Garmin is not responsible for any damages or expenses resulting from a miscue mounting surface arising from a failure to follow these instructions.
© 2023 Garmin Ltd. or its subsidiaries
Printed in Taiwan
August 2023
190-03009-19_0A
Force_Kraken_Trolling_Motor_Template.indd 1 8/15/2023 10:37:40 AM