CANOR AI 1.20 Integrated Amplifier User Manual
- June 26, 2024
- CANOR
Table of Contents
CANOR AI 1.20 Integrated Amplifier
Product Information
Specifications
- Stereo output power:
- Monoblock output power:
- Gain Frequency range:
- Input impedance:
- Stereo Inputs:
- Monoblock Inputs:
- Total Harmonic Distortion:
- Signal-to-noise ratio:
- Signal-to-noise ratio monoblock:
- Power Dimensions (W x H x D):
- Weight (Net):
- Weight (Gross):
Safety Instructions
Please read the safety instructions before operating the device. Failure to
observe these safety measures may result in the manufacturer’s declining
liability.
- Avoid exposing the amplifier to rain or moisture to prevent electric shock.
- When interconnecting two AI 1.20 amplifiers with a data cable, ensure both amplifiers are turned off.
- Make all connections only when the device is disconnected from the mains..
FAQ (Frequently Asked Questions)
Q: How do I connect external speakers to the amplifier?
A: To connect external speakers, use speaker cables and connect them to the
corresponding speaker outputs on the amplifier.
CANOR AI 1.20 Integrated Amplifier User Manual
Dear Music Lover,
thank you for purchasing our CANOR AI 1.20 Integrated Amplifier. To preserve
and maintain the best characteristics of your amplifier, we recommend you
carefully read the following lines.
SAFETY INSTRUCTIONS
Please read before putting the device into operation.
- Read the instructions – all safety information and instructions should be read before using the amplifier.
- Keep the user manual – the safety and user instructions manual should be stored for possible later use.
- Follow the instructions – all safety and user instructions should be followed.
- Water and moisture – the AI 1.20 amplifier should not be placed near water, for example near bathtubs, swimming pools, kitchen sinks, etc…
- Accessories – do not use accessories not recommended by the manufacturer.
- Placement – do not place a device on an unstable pad. The device may fall, which can cause serious injuries to children or adults, as well as damage to the device. Use only pads or racks recommended by the manufacturer or pads sold to dealers with this device. Any placement of the device should be in accordance with the manufacturer’s instructions and only accessories recommended by the manufacturer should be used.
- Ventilation – the unit should be placed the way to ensure proper airflow. That means it is not allowed to place the amplifier on a sofa, or on upholstered furniture. The amplifier may not be covered over when in operation; it would otherwise prevent proper airflow around the vent holes of the amplifier.
- Heat – amplifier must be placed to avoid the heating effect from heat sources, for example, radiators or stoves, or other heat-producing equipment. The distance from the back wall of the unit may not be less than 20 cm, and 20 cm above the area of AI 1.20 may not be any barrier. Alongside the unit should be ensured 20 cm minimum distance from other objects.
- Power source – the device must be connected only to a main supply for what it is designed for.
- Power cord – it is necessary to pay particular attention to a power cord, it must be positioned to avoid setting foot on it and ensure it is protected against mechanical damage.
- If you do not use the amplifier for a longer period – you should disconnect the power cord from the mains supply, or at least turn off the main power switch located on the back panel.
- Objects containing liquid – do not place these objects (vases, flowerpots), so that they can fall on the amplifier and, eventually, prevent the liquid from being leaked out on the amplifier.
- Damages requiring service – equipment should be repaired only by qualified service if:
- The power cord is damaged.
- The device dropped into the water or was poured.
- The device was exposed to rain.
- The device works incorrectly.
- The device fell on the ground or is otherwise mechanically damaged.
- Repairs – all repairs must be entrusted to a qualified service.
- General warning – use the device only in accordance with this user guide.
The manufacturer declines any liability should these safety measures not be observed. To help you avoid an electric shock, do not expose the amplifier to rain or moisture!
DELIVERY CONTENT
- Shipping packaging
- CANOR AI 1.20 Integrated Amplifier
- Remote control (CR2032 battery required)
- Power cord
- Textile gloves
- CANOR AI 1.20 User Manual
FRONT PANEL
- VOLUME KNOB – Amplifier volume control knob.
- POWER – Turning on and off the amplifier.
- MUTE – An instant muting of the volume. Subsequent pressing results in default volume.
- DIMM – Sets the display brightness in steps. From a turned-off display to its maximum brightness. After turning it on, the display is in its middle brightness level. In the state of a turned-off display while operating the device with function keys the display lights up and after a few seconds, the display turns off again.
- 1, 2, 3, 4, 5 – Input selector.
- XLR – Input selector for Monoblock mode only.
BACK PANEL
- LEFT / RIGHT SPEAKER OUTPUTS – A pair of terminals.
- MONOBLOCK OUTPUT – A pair of terminals only for Monoblock set-up.
- IN1, IN2, IN3, IN4, IN5 – Left / Right RCA inputs.
- XLR1, XLR2 – XLR inputs only for Monoblock set-up.
- C-LINK – Communication interface for Monoblock set-up.
- POWER –Mains power inlet / mains switch with mains fuse.
REMOTE CONTROL
Do not expose the sensors of your remote control to direct sunlight or to
other strong light sources. Remote control operates at an angle of 60 ° to
about 5 meters. Aim your remote control at the sensor on the device. There may
not be any obstacles in the way between the sensor and remote control. If the
appliance is placed behind glass, it may result in shortening the operating
distance of a remote control (according to the color and strength of the
glass). The keys on the remote control have the same function as the keys on
the front panel of the device.
The remote control is equipped with features for the amplifier and the CD player:
Amplifier / Preamplifier features
- ON / OFF – Turning on and off the amplifier.
- DIMM – Sets the display brightness in steps.
- ◄IN – Input selector.
- IN► – Input selector.
- VOLUME + – Volume control keys.
- MUTE – Instant muting of the volume.
CD Player features
- ON / OFF – Turning on and off the CD Player.
- DIMM – Sets the display brightness in steps.
- |<< BACKWARD – One short press jumps to the beginning of a track. If playback time lasts longer than 5 seconds, further pressing results in jumping one track back. When pressed for a longer time playback moves smoothly backwards.
-
| FORWARD – A short press skips one track forward, when pressed for a longer time, playback moves smoothly forward.
- ►‖ – Resumes and pauses CD playback.
- ■ – Ceases CD playback.
- INPUT – Input selector.
- REPEAT – Allows you to cyclically opt for single-track repeat, entire disc repeat, or disable repeat.
BASIC FUNCTION OF REPRODUCTION
Plug the power cord in AI 1.20. Turn on the AI 1.20 with the Power Main
switch, which is located on the back panel. When you turn on the main switch,
the AI 1.20 will set into standby mode – the red LED on the front panel lights
up. After pressing the Power button (on the front panel or the remote control)
controlled turning-on sequence gets initiated, the CANOR logo lights up, and
then the slow start-up of voltage begins. The output relay connects the signal
to the last selected input if the main power supply does not get disconnected.
During the first turning on or disconnecting of the main power supply IN1
input gets preselected and the volume level is set to – 44 dB. Volume is being
set in 63 steps by 1 dB. The highest volume is 0dB, the lowest being – 63 dB.
Another step is MUTE. You can control the volume with a big control knob on
the front panel. The volume is being controlled by a relay attenuator with an
accuracy of concurrence better than 0.05 dB. You can connect both 4 and 8 Ohm
loudspeakers to speaker terminal pairs on the back of AI 1.20.
MONOBLOCK MODE
As the amplifier has all its basic functions controlled electronically, we
have capitalized on this advantage and adjusted amplifier control the way in
order to be able to use a stereo amplifier as a monoblock. We therefore
developed a special protocol and a C-link communication interface.
This solution benefits from a great advantage, hence the monoblocks do not
need a control preamplifier and AI 1.20 can thus be used as an integrated
stereo amplifier and as a monoblock. Attenuators ensure absolute channel
concurrence. Two AI 1.20 get connected by a data cable via a C-link bus and at
this moment one amplifier becomes a MASTER and the other one a SLAVE. The
MASTER amplifier then takes over the entire control of both amplifiers
synchronous-wise. SLAVE amplifier has all the control elements turned off.
IMPORTANT
- XLR inputs are dedicated to use only in monoblock mode.
- A dedicated set of speaker terminals on the back panel for use in monoblock mode.
Interconnecting two AI 1.20 amplifiers by a data cable must be carried out when both amplifiers are turned off!! Caution! Make all connections only if the device is disconnected from the mains!
SPECIFICATIONS
- Stereo output power 2 x 50 W / 4 Ohm 2 x 30 W / 8 Ohm
- Monoblock output power 1 x 130 W / 4 Ohm 1 x 100 W / 8 Ohm Gain 30 dB
- Frequency range: 20 – 25 000 Hz – 0,5 dB / 5 W
- Input impedance 30 kOhm
- Stereo Inputs 5 x RCA
- Monoblock Inputs 2 x XLR (XLR active only only in monoblock connection)
- Total Harmonic Distortion < 0,0009 % / 1 kHz, 5 W
- Signal-to-noise ratio >90 dB
- Signal-to-noise ratio monoblock >100 dB
- Power 230 V / 50 Hz / 375 VA
- Dimensions (W x H x D) 435 x 170 x 485 mm
- Weight (Net) 28 kg
- Weight (Gross) 36 kg
CAUTION!
The Waste Electrical and Electronic Equipment Directive Regulation of the
European Union 2002 / 96 / EC governs the issue of separate waste collection.
This device may not be disposed of in unsorted municipal waste. Devolve the
appliance into a collection center for recycling and disposal of electrical
and electronic equipment waste. Correct disposal of waste does not cause
negative impacts on the environment and human health. You will thus contribute
to the protection of the environment.
EUROPEAN COMMUNITY DIRECTIVES
This product is designed and manufactured to comply with existing laws of the European Community. This product is certified by a testing laboratory and bears the CE mark
GUARANTEE CONDITIONS
Your CANOR AI 1.20 integrated class-A amplifier is guaranteed against any
defect in materials and workmanship for a period of 24 months. The warranty
only applies if an original proof of purchase and acknowledged certificate of
warranty can be furnished. The warranty covers defects in materials and labor,
but does not cover misuse, unauthorized modifications, and external causes
such as acts of nature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>