CHUANGYUAN 2BED2CYTAG Cytag Bluetooth Locator User Guide

CHUANGYUAN 2BED2CYTAG Cytag Bluetooth Locator User Guide

Instruction

**Add Item**

• Turn on iPhone Bluetooth function and open the Find My
• Hold the iPhone close to the item, power the item, tap “+” and select add other
• Select searched model
• Fill name and choose an Emoji.
• Agree Register item to your Apple
• Tap Finish to complete add

Note: You need to log in your Apple ID first when you add a device.

Learn More – Serial number lookup

• Operate after pairing is complete
• Locate the button on the front of the
• Press and hold the button for five One beep will sound, then two beeps.

How to Disable

• Operate after pairing is complete
• Locate the button on the front of the
• Press and hold the button for eight One beep will sound, then two beeps, then three beeps.

Factory Reset

• Locate the button on the front of the
• Keep the button pressed, to hear in turn: 1 beep, 2 consecutive beeps, 3 consecutive indicator tones, continue to hold the key, when you hear a long indicator beep then release, at this time device had restore the factory status

How to switch between Nearby, Separated and Disconnect： Nearby:

Connection Status Disconnected

Separated:

Nearby status timeout;
Reboot(The battery of this device cannot be removed. Reboot is not supported).

Disconnect:

Turn off mobile Bluetooth.
TCP005 Max Connection
-2 connection
whether the accessory will respond with an invalid state error or not respond at all if the Firmware Update characteristic is written to while the accessory is connected to a non-owner?
-Accessory will respond with an invalid state error.

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:

The device has been evaluated to meet general RF exposure requirement. The device can b e used in portable exposure condition without restriction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>