SF-Glow30-01 Series Spider Farmer Official Light User Manual
- June 23, 2024
- Spider Farmer
Table of Contents
SF-Glow30-01 Series Spider Farmer Official Light
SAFETY INSTRUCTIONS FOR USE
- The light belongs to class I protection equipment; it must be properly grounded.
- The power supply should be connected by qualifed professionals.
- Before use, ensure that the voltage used is not higher or lower than the specified value in the operation manual.
- For daisy chain operations, the total power cannot exceed your timers rated capacity.
- Do not touch the product while it is in operation.
- Do not look directly into the lights without wearing protective glasses.
- To disconnect the power cord, only pull on the plug; do not use excessive force on the cable itself.
- Exercise caution and adhere to electrical safety guidelines during instillation. Avoid touching exposed wires to prevent the risk of fatal electric shock.
- Unplug the power cable during storms and rainy weather to mitigate the risk of lightnig strikes.
- Always unplug the light before cleaning and performing repairs.
- Do not disassemble, repair or modify the light without the authorization of the manufacturer unless performed by qualified professionals.
- The maximum operating temperature is 40 C. Do not operate the light above this temperature.
- Do not connect the light to other dimming devices without authorization.
GENERAL CARE
SPIDER FARMER Grow Lights are passively cooled with zero moving components. They are designed for harsh environments and years of maintenance-free performance. Some basic care will keep your lights working at peak performance cycle after cycle.
- Natural convection dissipates heat away from the heat sink. In order to facilitate proper cooling, maintain at least a one-inch gap between the fixture and the roof of your grow area. Failure to do so may reduce the fixture’s lifespan.
- To achieve the optimal lifespan and performance of your fixtures, routinely check for and remove excess dust, debris, and mineral build up from the heat sink and LED array. Cleaning should always be done with the fixture unplugged and we recommend using low-pressure compressed air to clean effectively and safely.
- Never use a cloth to clean the diode array, as it may scratch or damage the integrity of the silicon seal, or even dislodge diodes entirely.
- To minimize degradation, avoid touching the diodes with your hands, even while the fixture is powered off.
OTHER CATEGORIES
Led Grow Lights
Spider Farmer Led Grow Lights utilize Samsung LM301 H EVO high-efficiency
diodes to provide powerful and uniform light output for optimal crown
penetration and the highest possible yield. Each light comes equipped with a
dimming box, allowing for adjustable light intensity and the ability to
connect multiple lights for uniform light distribution.
Grow Tents
Spider Farmer grow tents are designed to create ideal growing conditions for
indoor plant cultivation. By adopting a unique 1680D Oxford canvas and Diamond
reflective Mylar, Spider Farmer grow tents effectively maximize light
reflectity and prevent light leaks. The metal frame is made from hardened
steel, and our tents are three times thicker and denser than ordinary tents.
With a stable metal angle adapter and a load capacity of up to 140 lbs.
Inline Fan
Utilizing a mixed flow design combined with an EC motor to ensure true energy
efficiency with a very low noise level. Lightweight ABS blades reduce the
airflow resistance and increase airflow by 40%. The smart controller has
multiple modes for operation, 10 speeds, is easy to program and can control
the humidity and temperature automatically.
Plant Stand
This stand is made of high-grade iron with a moisture-resistant powder
coating, ensuring its durability. The weight and durability make it a
testament to exceptional quality. Textured and leak-proof trays provide a
secure and hygienic environment for your plants. Installation takes under 20
minutes, and the stand has four removable wheels for effortless movement. We
recommend using it with SF-Glow80 or SF600 LED Grow Light.
SPECIFICATIONS
Spectrum Test Report
PACKAGE CONTENTS
INSTALLATION
Tips
- The spacer that holds the carabiner in place can be rotated to adjust the direction of the light bar.
- The applicable surface of the adhesive-backed nylon is the inside of the tent, smooth surfaces such as metal, wood, plastic, glass, etc.
- Please do not use it for rough surfaces such as brick walls, plastered walls, wet surfaces, and uneven surfaces.
- Confirm the installation position of the four light bars beforehand, cut the appropriate length of adhesive-backed Velcro for each one, tear off the paper seal, and then stick them inside the tent.
- Take out the four fixing clips, snap the back of the light bar onto the buckle clips, and use the Velcro side to stick tightly with the inside of the tent.
- Ensure the assembly is complete and plug the power cord into the socket. You can program more through the digital timer.
WHY CHOOSE SPIDER FARMER?
Shipping : A. Global Delivery Available: We deliver worldwide B. Multiple Warehouses: with warehouses in the USA, CA, AU, UK, EU, RU, and TH, we can offer fast delivery within 24 hours
Customer Service:
A. Local Repair Centers: We have repair centers in the USA, CA, AU, UK, EU,
and RU for your convenience
B. 5-Year Warranty
C. Dedicated Customer Service: our friendly and professional customer service
department is always ready to assist you
Support : Professional Technical Support: We have a team of experts available to assist you with any technical issues
Bulk Price Discounts Discounts for Large Orders: The more you order, the cheaper the price
Contact :
Tel : +1 8409776768
Email : support@spider-farmer.com
info@spider-farmer.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>