Qian LX3 Motorcycle Helmet Headset Instruction Manual
- June 22, 2024
- Qian
Table of Contents
- Motorcycle Helmet Headset LX3
- Packing List
- HOW TO USE THE Product
- Multi-Function Button Operation Instructions
- Fault Answer
- Installation Steps for Clamp Base
- Installation Steps for Adhering the Base
- Install Microphone Kits
- Install Speaker Kits
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Qian LX3 Motorcycle Helmet Headset Instruction Manual
Motorcycle Helmet Headset LX3
Packing List
-
Host
-
Wage adhesive Base
-
Instructions
-
speaker kits
-
Hard Tube wire microphone
-
Soft Tube wire micophone
-
Speaker Magic Stickers
-
Bracket Magic Stickers
-
Type-C Charging Cable
HOW TO USE THE Product
Multi-Function Button Operation Instructions
Long Press “3” Seconds to Power On/Off Long Press “3” Seconds to Power On and
Enter Pairing Status, You Will Hear: “Power On…” Prompt Tone, After the
Pairing is Successful, the Blue LED Flashes Once Every 6 Seconds, You Will
Also Hear a Prompt Tone for Successful Pairing, The Following Functional
Operations Can be Performed:
Answer a phone call (When Incoming Call, Short
Press to Answer Call)
Terminate the call(During a Call, Short Press)
Refuse to answer phone calls (Press “3” Seconds
During Incoming Call to Reject Call)
Music play/pause (Short Press)
“+” Button
Long Press (Volume Up) Short Press (Play Next)
Double Click (Turn on and off automatic answering function)
Button
Long Press (Volume Down)
Short Press (Play Previous)
Double Click (Wake up the voice assistant function
“M” Button
Short Press Control Color Changing Lights (Default breathing light, Light-slow
flashing, fast flashing, Turn off color changing light)
Indicator LED Description
Power on status (Blue ed fast lashing) BT successfully paired (Blue led lashes
once every 6seconds) During charging (Red led-light on) After fully charging
(Red led-light offand green led-lighton)
Fault Answer
Q. No sound from speakers or microphones
A. Please make sure the microphone male and female connectors well
plugged in (You can try to push the male head inward and push it hard).
Q. No sound from microphone
A. Are the microphone male and female connectors plugged in?
Q. How to turn off and on “automatic answering function”?
A. (under pairing status), double-click the “+” button
Q. How to turn on Siri function?
A. Double click on the”-” button
Q. How to turn off the color-changing light
A. Short Press “M” button?
Q. Unable to charge
A. Please make sure the charger is within the appropriate voltage range
and the charging cable indicates Type-C of the standard protocol (please use
the factory charging cable).
Matters Needing At ntion
Do not touch th product it sharp objects to avoid srtch r damage Do notexpose
thisroduct tape fire o avoidexplosion award Do not attempt o disassemble the
product o void product damage the products not use for along ime, plase
storetnadryplace and gie the product roguery Charing lone a month) o ensure
theeneral operon the product
Installation Steps for Clamp Base
Helmet edges(omm) use lamp base:
-
Take out the product from the packaging box Gently clip the edge of the helmet by iron clip, push outward and then push upwards with force
-
Installation Completed
Installation Steps for Adhering the Base
-
Take out the Magic Adhesive Base from the packaging bos, peel off the hook-facing magic sticker along the edge
-
Flatly apply the tom hook-face magic sticker to the curved position of the helmet
-
Take out the product from the packaging box and remove the clamp base: push the Plastic Buckle Position outside and then push the clamp base down, to remove the clamp base
-
Align the female ports of the Magic Adhesive Base with male buckle positions and place it flatly into the machine
-
Move the Magic Adhesive Base upwards and snap it into place
-
Installation Completed
Install Microphone Kits
Hard Tube Wire suitable for (most helmets, such as full helmets and barefaced helmet, off-road helmet, retro helmet)
Square magic sticker attached to the inside part of the helmet near the face
Butterfly shaped bracket adhere to the square magic sticker
Soft Tube Wire (microphone sleeve) suitable for full helmets
Square magic sticker attached to the inside part of the helmet near the mouth
Soft Tube Wire (microphone sleeve) adhere to the square magic sticker
Install Speaker Kits
Remove the helmet lining Attach the Speaker Magic Sticker surface at the ear positions of the helmet
Adhere the speakers to the Speaker Magic Sticker (short- line speaker is attached to the left or on one side of the machine)
Align and insert the male and female slots, then rotate and secure them Arrange the connecting wires and place them in the helmet
Insert the Type-C headphone plug into the headphone port
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or mare of the
following measures -Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction