BUZZTECH S52 Smart Watch User Manual

BUZZTECH S52 Smart Watch User Manual

 Appearance Description

Schematic Diagram of Charging

1. Operate i strict accordance with the following fiures: 1please use the product-specific magnetic charging cable to charge. by aligning it with the charging contacts on the back of the watch.
2. D0 notuse a power adapter with a voltage exceeding 5V and an output current exceeding 14 for charging, as this may cause charging failure and damage to the magnetic charging cable o the device.
3. Please actvate the watch when truns out of power before charging: the watch screen will onty light up after about 5 minutes of normal charging.

Introduction to Watch Function

1. Bluetooth cali switch,
2. Shortcut menu switch.
3. Do not Disturb mode.
4. Hand lift screen light switch.
5. brightness adjustment.
6. Silent mode.
7. Find your phone.
8. Power saving mode.
9. About systems.
10. Setting.
11. Bluetooth connection status.
12. Cail Bluetooth status.

Main interface : Display the current time, date, steps and other
information of the watch: Long press on the main screen to switch the main dial left and right, and click OK; Swipe right to bring up the split screen menu.
Steps: Display current steps, distance and calories of the watch.
Call function: Click the call switch. Open the phone settings – Bluetooth-search connection Bluetooth 552-xxxx to play mobile music or make/receive calls, etc.
Heart rate: Slide to this page and keep a while and automatically measure the current real-time dynamic heart rate. Connectable to APP to set real-time monitoring and view data records.
Blood oxygen : Slide to this page to stay, automatically start to measure the current blood oxygen data, vibration prompts the result; You can set timing monitoring and view data records in the APP.
Exercise: Click on the icon on this page to access the multiple sport modes option. Select a sport mode, click the icon to start, and slide right to pause or stop the sport.
Blood pressure: Slide to this page and keep a while and automatically measure the current blood pressure data and vibrate to indicate the result. Connect the APP to view the watch offline measurement data or online measurement synchronously.
Sleep: The bracelet can record and display your sleeping time last night, and the time of deep sleep and light sleep. More detailed data can be viewed synchronously in the API
Weather: Display the local weather conditions. Connect the synchronization APP for normal use, and open the phone GPS to ensure that the APP gets the positioning permission function and network connection.
Music: The watch can control the mobile phone player to play music, This function needs to open the music player and keep the connection with the APP
Information: The watch can receive information notification from the mobile phone. This function needs to open   the corresponding function and keep the connection with the APP.
Breathing training: You can choose different breathing patterns and time to start training.
Alarm clock : You can set eight alarm clocks at different times.
Vole assstant : Afe connecting the phone wit Buetooth,you can tap the screen t wake up the volce assistant
Stopwatch: Clickon thefcon 0 sarthe function, and click sart fortiming, pause of reset. Slide right o leave.
Searchs Cck this con,your phone will beep o inicate the orentaton of your phone, s function equirs your phone to Sty connectect wit he viatch APR.No aleton (e phone n Slent mode.
Settings : You can set he watch Language, bightness, sound Shutdown, estoe factory Setungs, and watch system nformation

Watch APP Installation and Connection Instructions

this product need o be connected to a special APP for normal use, such as time display,call aert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following OR code to select the version suitable for your mobile phione system or enter main application markets to download and install Glory Fit.

Device Connection

Before using the APP, please turn on the mobile phone Bluetooth and  ‘mobile phone GPS postioning to obtain the moblle phone positioning permission. After the connection is successful, t will prompt “* Topairwith : S52°, please select pairng.
The watch connection operates as folows:

Open the APP and make settings according to the prompt
Click Select Device) to search
Select the name of the searched Bluetooth: 552
Connection succeeded

Note:

1. For Android users, the APP. should obtain permissions and fun backstage, otherwise it wil affectthe user experience.
2. For systems below  iPhone 105 13, afterconnecting inthe APP, you need to connect o the 552 for the second time in the Bluetooth settings of the. mobile phone, and then you can make calt, play multimedia music and other funcions.

Precautions

1. charging with water sains.
2. This product is an electronic moritoring product,not for medical use, andthe measurement data s for reference only.
3. tis ot recommended to wear In hot water baths and longtime Swimming.
4. Please charge with the matching charging cable.

FAQ

annot synchranize with the fime of the phone.

efore using i forthe first time. 8. Users need o open the APP to abtain positioning permission (Phone Settings - Applications). C.Ifthe watch has already been paired with 2 Bluetooth connection n the: phone, please cancel the pairing frst and then search fo the connection inthe Apr. 0. fthe watchis not sed for long time, the Bluetooth will go into a dormant state. Please turn off the 8luetooth of the watch and the phone, reopen ft after about 1 minute, and try o search the connection n the APP again E.The watch must be connected to the APP,otherwise, the steps, sleep, time, and ather functon il not work propery.

There s na alert function on the watch.

The reminder switch s turned on, but there i no reminder on the watch,or

the reminder is sporadic.

Answer Ifthe phone turns on the message nofifcation and the corresponding notifcation permission according o the above tps, the Bluetooth s kept on, and the APP and the wach are kept connected, maybe the system authorized APP alert function s not wrking, and the user needs to te-check the message push function.

4. Android's phone Bluetooth often disconnects or has no message alert

after a period of connection.

Android will from time to time clean up the phone's backstage applications or applications that consume more power for smooth system operation. If the APP is not set to allow backstage running, it will be easily cleaned by the system and the Bluetooth will drop out. Different Android phones have different methods for APP backstage running settings. As in the Huawei nova 8 SE: Settings - Battery - Power Consumption Ranking - APP-Application Launch Management-Manually manage to turn on backstage running.

5. The watch cannot measure, of the data i not accurate.

A.Sit down before the measurement and put your body n a relaxed state with your arms level with your chest position B. Adjust the tightness of the watch. The back of the watch should be close: tothe skin o prevent light eakage from the photoelectic sensor. €. Keep your body calm during the measurement.Talking/coughing/ sneezing and other movements will affect the accuracy of the measurement results ) changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation s subject tothe following two conditions: (1) this device may not cause harmful nterference, and (2)this device must accept any Interference recelved, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant o part 15 of the FCC Rules These limits are designed to provide reasonable protection against harm fulinerference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not stalled and used in accordance with the Instruction’s, may cause hamaul inerference to radio communications. However, there i o quarantine that interference will not occur in 2 particular installation. 1fthis equipment does cause hamaul inerference o radio or television reception, which can be determined by turning the equipment off and o, the user s encouraged to try o correct the interference by one or more of the following measures

• Reorient o relocate the receiving antenna. Increase the separation between the equipment and recelver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver s connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>