Dual MTR14G Tractor Radio User Guide

Dual MTR14G Tractor Radio User Guide

Quick Start Guide

AM/FM/Bluetooth Receiver
To download the complete manual, please visit www.dualav.com or call 1-866-382-5476, 9AM-5PM EST (Monday- Friday).

Wiring Connections

The chart below shows the connection for each wire in the wiring harness.

Fuse:
When replacing the fuse. make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.
USE 10 AATC REPLACEMENT FUSE ONLY

Tractor plug models

TRWHKUB| Harness for Kubota and other Tractors
TRWHKTI| Harness for Kiosk and other Tractors
TRWHCAT| Harness for Caterpillar and other Tractors
TRWHJDR| Harness for John Deere and other Tractors

Installation

Mounting the Radio

Step 1:
Insert the mounting sleeve into the radio opening O·f your tractor as shown to the right.

Step 2:
Bend the mounting tabs around the mounting sleeve around the radio opening of your tractor as shown in the image to the right.

Step 3:
Connect the wiring harness to the back of the radio and into the plug of the tractor and then slide the radio into the mounting sleeve until it clicks into place as shown in the image to the right.

General Operation

Power On/Off| Press the button to turn the unit on. Press again to turn unit off.
---|---
Changing Modes| Press SOURCE to select between Radio. USB. Bluetooth. AUX. Modes of operation are shown in the display.
Volume| Adjust volume using volume knob.
Dimmer| Press DIM to select the dimmer level and adjust it.
Mute| Press to silence the audio. Press again to resume listening at the previously selected volume.
Auxiliary Inputs| Insert a 3.5 mm cable in the unit’s front AUX port.
Reset| Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located near AUX port on the front panel
Setting the Clock| With the unit on, press DISP to display clock time. Press and hold DISP until the hours or minutes begin to flash. then release. Rotate the volume knob to adjust the time.
Display| Press DISP to toggle display between various displayed information.
Audio / Menu| Press volume knob momentarily to select between the audio functions. Press and hold volume knob for more than two seconds to select between the menu functions. Rotate the volume knob left/right to adjust or activate the desired function/audio.
Zone 1/Zone 2 Audio Controls| To choose between speakers and headphones, press and hold the Volume Knob to access the audio menu. Press the volume knob again to enter the Zone Control feature. Turn the volume knob to the right to adjust to both Zones Off. Zone 1 On (Speakers). Zone 2 On (Wired Headphones) or both Zones On (Speakers and Wired Headphones).

AM/FM Tuner Operation

Seek Tuning| Press and hold TUNE or TUNE for 2 secs and release it to auto seek to previous or next strong station.
---|---
Manual Tuning| Press TUNE or TUNE momentarily to change radio frequency down or up one step at a time. Press and hold TUNE or TUNE for 3 secs to advance quickly and release it to stop on the desired station.
Band| Press BAND to select between FM 1, FM 2, FM 3, AM 1 and AM 2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory.
Storing Presets| Up to 18 FM and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display.
Recalling Presets| Preset stations can be recalled any time by pressing the corresponding preset button.
Auto store| Press and hold the volume knob for more than 2 seconds to display Auto Store, then press DISP to store 18 FM stations and 12 AM stations automatically.

USB Operation

Playing MP3 Files| To play MP3 files, insert a USB device containing MP3 files.
---|---
Track Select| Press TUNE Press TUNE to skip to the beginning of the next song.
Press TUNE to skip to the beginning of the previous song
Fast Forward and Reverse| Press and hold TUNE or TUNE or reverse a track.
Pause| Press to temporarily stop playback.
Press again to resume playback.
Folder Access| Folder can be found by pressing Folder Up or Folder Down. About 1 second after the folder name is displayed, the first file under the selected folder will be displayed and playback.
Repeat| Press RPT to toggle between RPT ALL. RPT FLD and RPT ONE.

• RPT ALL – Plays all tracks on USB device.
• RPT ONE – Continuously repeats selected track.
• RPT FLD – Continuously repeats all files in current folder.

Random| Press RDM to play tracks in random order, press again to cancel the RDM function.
Intro| Press INT to plays first 10 seconds of each track. press again to cancel the INT function.

Bluetooth® Operation

Preparation| Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process.
---|---
Pairing a New Device| The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.The device name is “Dual Media Player”Note: The head unit can be in any mode of operation when pairing is performed.
Streaming Audio Troubleshooting| The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:

• Press to skip to the next available audio track.
• Press to skip to the previous audio track.
• Press playback. Ito toggle between play and pause during

Voice Activation Operation

Bluetooth should be paired between your smartphone and the receiver.Press the voice activation button . and the receiver will switch into Bluetooth mode.This will activate Siri® or Google Assistant™ o,n your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.

Limited One Year” Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Dual Electronics Corp. Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.

Dual Electronics Corp. Inc agrees. at our option. during the warranty period. to repair any defect in material or workmanship or to furnish an equal new. renewed. or comparable product (whichever is deemed necessary) in exchange without charges.
subject to verification of the defect or malfunction and proof of the date of purchase.
Subsequent replacement products are warranted for the balance of the original warranty period.

What is covered? This warranty covers all defects in the material and workmanship in this product. The following are not covered: software. installation/removal costs.
damage resulting from accident. misuse. abuse. neglect. product modification.
improper installation. incorrect line voltage. unauthorized repair. or failure to follow instructions supplied with the product. or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

Warranty Coverage

• Limited 1-year warranty. (Proof of purchase required)
  Dual recommends professional installation of any electronics in your vehicle to ensure the best performance.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual.
   A slight adjustment of any custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorised service centre.

3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.

4. For more information and for the location of the nearest authorised service centre please contact us by one of the following methods:

   • Call us toll-free at 866-382-5476 (Monday-Friday, 9:00 am, to 5:00 pm. EST)
   • E-mail us at cs@dualav.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchant ability and fitness for a particular purpose and any obligation. liability, right. claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorised to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio technician for help.

Dual Electronics Corp.
Toll Free : 1-866-382-5476
Monday-Friday. 9AM-5PM
www.dualav.com
02024 Dual Electronics Corp. All rights reserved.
The Bluetooth• word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Siri and Apple are registered trademarks owned by Apple Inc.
Google Assistant and Android are trademarks owned by Google LLC.
Other trademarks and trade names are those of their respective owners.
NSCO923-VO1

www.dualav.com
Follow us to keep up to date with new products and information!
Facebook
@Dual Electronics
Instagram
@Dual Electronics
Twitter
@Dual Electronics Corp

Register your warranty

Scan to register, or visit:
www.dualav.com/register
Upon registration you may also choose to be notified of product updates or special promotions

Visit www.dualav.com for detailed owner’s manuals on most products.

If you need any assistance, please contact customer service at cs@dualav.com or call 1-866-382-5476 M-F 9 am – 5 pm ET

Thank you for your purchase!

References

• Premium Audio for Car, Marine, & Home - Dual Electronics
• Premium Audio for Car, Marine, & Home - Dual Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>