imperii RR FIERRO SmartWatch IPS Multitouch IPG 7 YOSS Instruction Manual

TE.03.0304.01

Instruction for Quick Use

Introduction to Parts

How to charge?

For first-time use, please take out the bracelet and fully charge it with the original charger(charging method: put the bracelet into the charger, align the two touchpoints with the charger).

Wearing method

1. The bracelet is best worn behind the ulna styloid process;
2. Adjust its size via the band adjustment holes, and fasten the band buckle;
3. Sensor should be close to skin, avoid moving the sensor while use.
   Notices in monitoring heart rate:

• LED light of heart rate on the backside of bracelet will flashes;
• Sensor should be close to skin, avoiding the external light to affect the accuracy of test;
• Please keep clean in testing area, sweat or blot may affect test results.

On/off

1. Charge the bracelet or long-press the screen for 3 seconds to power on it(vibrate notification);
2. Switch to shutdown interface, long-press the shutdown interface for 3 seconds to power off it(vibrate notification).

Bracelet Operation

1. Slide to light up the screen or switch display interface;
2. Screen turns off after 5 seconds of inactivity; users can adjust the screen display time via the APP.
3. Factory default setting: 24 hours whole-day heart rate monitoring. Users can turn on/off it in the general settings of APP.

How to install APP

Scan the following QR code or download ‘GloryFit’ from APP markets.

Google Play: https://play.google.com/store/apps/details?id=com.yc.gloryfit

iOS: https://itunes.apple.com/cn/app/id1237479843

Demands on Device: IOS 8.0 or above; Android 4.4 or above, Bluetooth 4.0 is supported

Connect with device

For first-time use, please connect with phone APP to calibrate the data. The bracelet will automatically synchronize the time after connecting successfully,  otherwise, the step number and sleep data will be incorrect.

Bluetooth connection: after successful pairing, APP will automatically save the bracelet Bluetooth address. When APP is opened or operated in the background, it will automatically search and connect the bracelet.
Data synchronization: manually pull down the APP homepage to synchronize data; the bracelet can store 7  days’ off-line data. The more data, the longer the synchronization time will be.
The maximum synchronization time will be less than 2 minutes. After synchronization, “synchronization finish” will be popped up.

APP functions and settings

Please set personal information after entering APP
My – Personal
• Settable; photo – sex – age – height – weight, correct personal information can enhance the accuracy of data.
• Customize personal exercise goals. With reasonable sports planning, you can enhance your body quality.

Reminder Function

Please turn on the reminder function in APP setting center, and keep the phone and bracelet be connected successfully via Bluetooth. The bracelet will vibrate to remind users when there are messages.

Incoming reminder: the bracelet will vibrate and display the name/number of incoming calls, If the ‘call rejection’ function has been opened in APP setting center, long-press the screen for 3 seconds to reject the call.
Message reminder: the bracelet will vibrate and display the SMS icon when receiving message, click the icon to view content.
Twitter reminder: the bracelet will vibrate and display the Twitter icon when receiving twitter message, click the icon to view content.
Whatsapp reminder: the bracelet will vibrate and display the Whatsapp icon when receiving Whatsapp message, click the icon to view content.
Smart alarm clock: you can set three alarm clocks via APP. After successfully setting, it will synchronize the alarm clocks to the bracelet; smart alarm clock is silent mode, and only reminds you by appropriate vibration. It can remind you in off-line status.
Sedentary reminder: the default reminder interval is one hour; in the connected status, turn on the sedentary reminder via APP, if the user does not exercise within one hour, the bracelet will vibrate to remind the user to exercise.
Other reminders: the bracelet will vibrate and display icon after receiving other messages such as emails. Please click the icon to check content.
Goals reminder: when the step number reaches the goals set on APP, the bracelet will vibrate to remind the user and display the icon.

Function of Sleep Monitor

The bracelet automatically enters the sleep monitor mode to detect your sleep time (deep sleep, light sleep or sober) and sleep quality throughout the night; Sleep data can only be viewed on APP now.
Notice: sleep data only can be generated when you wear the bracelet to sleep.

Main function interface

Main interface

There are three main interfaces, you can switch among them by sliding up or down. After the first time pairing and connecting with phone APP, the bracelet will automatically synchronize information of your mobile phone such as time, date, week and etc.

Notice:
1. When not wearing the bracelet, jeon won’t beat, and only display the last test value;

2. When wearing the bracelet, icon will beat, and the heart rate value will be reset and retest. The real­ time heart rate will be displayed.

Status Interface

Click the interface to view the current step number, distance, and calorie status.
The distance and calories are calculated and displayed according to walk steps, personal height, and weight set in APP.

Sports Interface

Click the interface to enter specific sports interfaces, including running, riding, swimming, rope skipping, table tennis, badminton and tennis. You can switch interfaces by sliding left and right.

Click specific sports interface to start the exercise. Slide left to finish the current exercise and return to a specific sports interface.

Information Interface

Click to check messages. Bracelet can save 8 messages recently pushed by APP (if no message, it stops at message interface), click to turn pages, long- press the interface for 3 seconds to delete the current message, left slide to exit to the previous interface.

Stopwatch Interface

Click the interface to start the function, and stop by clicking again. Left slide to exit to the previous interface.

More Functions Interface

Click this interface to enter the sub-menu interface for more functions.

Adjust brightness: click to choose different brightness, it has four levers of brightness.
Find My Phone: click the interface of “find my phone” under connection status, the phone will issue a ring to remind the user.

About: click the interface to check the build number and Bluetooth address.
Restore: long-press the interface for 3 seconds to reset all data, and the data in that day on APP will be reset as well (other historical data will be kept).
Shutdown: long-press the interface for 3 seconds to power off.

Precautions

• Please prevent your bracelet from being shocked, and exposed under high temperature and blazing sun fora long time.
• Please don’t disassemble, repair or modify the device.
• The device should adopt 5V500MAto charge, it is forbidden to charge with over­ voltage power supply.
• It should be used within the temperature of 0 degrees – 45 degrees. It is forbidden to throw into fire, it may cause explosion.
• Please dry the bracelet with a soft cloth before charging if get wet, otherwise, the water ill corrode charging touchpoints, and leading to charging failure.
• Please don’t touch chemical substance such as gasoline, cleaning solvent, propanol, alcohol or insect repellent.
• Please don’t use the product in high voltage and high magnetic environment.
• In case of sensitive dry skin or too-tight wearing, you may be uncomfortable.
• Please don’t take a hot bath by wearing it.
• Please dry sweat in your wrist timely for its possibility to lead to skin itch or allergy by long-time touch with soap, sweat, allergens or contaminated ingredients.
• In case of frequent use, it is suggested to clean weekly. Please wrap by wet clothes, and remove oil or dust by mild soap.
• Do not open too much APP notification push without special requirements.

Common Problem

1. How to deal with failure connection with Bluetooth? (Connection/reconnection failure or very slow connection/reconnection)
Please confirm whether your device is IOS8.0, Android 4.4 or above, and supports Bluetooth 4.0.

1. Due to signal interference in Bluetooth wireless connection, the time used for each connection may be varied. If it fails to connect for a long time, please confirm that you use it in environment without magnetic field or interference of multiple Bluetooth device.
2. Turn off the Bluetooth and turn on again.
3. Turn off the background applications of mobile phones or restart your mobile phones.
4. Please don’t make your mobile phones connect with other Bluetooth devices or functions at the same time.
5. Please check whether the APP is operated normally in the background.

Otherwise, it may fail to connect,
2. How to do when it fails to search the bracelet?
1). Please make sure that the bracelet is powered on and activated, and it is not bound to other mobile phones, then put the bracelet close to the phone. If it still  does not work, please turn off the phone Bluetooth and restart the phone Bluetooth after 20 seconds.
2). Make sure your phone turns on GPS.
3. Why should bracelet be worn tightly when measuring heart rate?
The bracelet adopts light-reflection principle. It collects the signal reflected to the sensor for figuring out your heart rate after light source penetrating through your skin. If you don’t wear it tightly, the ambient light will enter the sensor, and its accuracy will be affected .
4. Why can’t receive the notification while opening reminder function.
Android phone: Make sure the phone and the bracelet are connected. After connecting, set the corresponding permission in the phone settings, allow the “GloryFit” app to access calls, text messages, contacts, and keep “GloryFit” running in the background; if some security software has been installed in the mobile phone, add “GloryFit” into the trust list. Apple mobile phone: If there is no reminder after a successful connection, it is recommended to restart the phone to reconnect it. When you reconnect the bracelet, you must click the “pairing” after the Bluetooth pairing request is popped up.
5. Is the bracelet waterproof?
IP67 waterproof and dust-proof grade (IP67 standard is water of over 35 degrees, over 1 meter deep for 30 minutes). Normally, you can wear it to washing hands, running or washing cars freely)
6. Does Bluetooth connection need to be opened all the time? Will data be kept if disconnection?
Data is retained in the bracelet (data of 7 days will be kept) before the data is synchronized. When the Bluetooth connection between mobile phone and the bracelet is successful, the bracelet data will be uploaded to the mobile phone automatically. Please synchronize the date to mobile phone timely.
Notice : if incoming call or message notification are required, you should keep Bluetooth connected, while the alarm clock notification support off-line work.

Basic Parameters

TECHNICAL SERVICE : http://www.imperiielectronics.com/contactenos
Importado por:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC

imperii RR FIERRO SmartWatch IPS Multitouch IPG 7 YOSS Instruction Manual – Download [optimized]
imperii RR FIERRO SmartWatch IPS Multitouch IPG 7 YOSS Instruction Manual – Download
imperii RR FIERRO SmartWatch IPS Multitouch IPG 7 YOSS Instruction Manual – OCR [PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>