A9NCORE1V Vacuum Cleaner

Product Information: Vacuum Cleaner

The LG Vacuum Cleaner is a rechargeable appliance designed to
simplify cleaning tasks. The appliance is equipped with a
rechargeable Lithium-ion battery that has a rated capacity of 25.9
V% and 2400 mAh, depending on the model purchased. The vacuum
cleaner comes with a charging station, mop nozzle, and various
nozzles and tools for cleaning different surfaces.

Safety Instructions

Before using the appliance, read all instructions carefully to
prevent any unforeseen risks or damage from unsafe or incorrect
operation. The safety guidelines are separated into ‘WARNING’ and
‘CAUTION’ categories to help you identify the level of risk
associated with certain operations.

WARNING

This indicates that failure to follow the instructions can cause
serious injury or death. For instance, do not use the appliance
near water, rainfall or high humidity. Do not allow children or
people with limited physical, sensory or mental capabilities to use
the appliance unless they have been given proper supervision or
instruction.

CAUTION

This indicates that failure to follow the instructions can cause
minor injury or damage to the product. For instance, do not leave
the appliance unattended while it is charging, and do not
disassemble or modify the appliance in any way.

Installation

Before installation, read the instructions carefully to ensure
that the product is installed correctly and safely. The vacuum
cleaner comes with a charging station, mop nozzle, and various
nozzles and tools for cleaning different surfaces. Follow the
instructions below to install the appliance:

Product Overview

Check that all parts are included in the package before
installing the appliance.

Installing the Charging Station

1. Choose a suitable location for the charging station.
2. Place the charging station on a flat surface.
3. Connect the charging cord to the charging station and plug it
   into an electrical outlet.

Storing the Accessories

Store the accessories in a safe and dry place after use. The mop
nozzle and other nozzles and tools can be attached to the charging
station for easy storage.

Operation

Follow the instructions below to use the vacuum cleaner:

Getting Started

1. Charge the appliance fully before use.
2. Press the power button to turn on the appliance.
3. Select the appropriate nozzle or tool for the cleaning
   task.

Charging the Battery

When the battery is running low, follow these steps to recharge
it:

1. Place the appliance on the charging station.

2. The charging indicator light will turn on when charging
   begins.

3. The charging indicator light will turn off when charging is
   complete.

Using the Mop Nozzle

The mop nozzle is used for cleaning hard floors. Follow these
steps to use it:

1. Attach the mop pad to the mop nozzle.
2. Fill the water tank with clean water.
3. Attach the mop nozzle to the appliance.
4. Turn on the appliance and begin cleaning.

Using the Nozzles and Tools

The other nozzles and tools are used for cleaning different
surfaces. Follow the instructions in the manual to select and
attach the appropriate nozzle or tool for the cleaning task.

Maintenance

Follow these instructions to maintain the appliance:

Cleaning the Appliance

Use a soft, damp cloth to clean the exterior of the appliance.
Do not use abrasive cleaners or solvents.

Cleaning the Nozzles

After use, remove any debris from the nozzles and tools. Wash
them with water and dry them thoroughly before storing.

Troubleshooting

If you encounter any issues with the appliance, refer to the
troubleshooting section of the manual before calling for
service.

OWNER’S MANUAL
VACUUM CLEANER

ENGLISH

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

A9N***

MFL69883699 Rev.00_102521

www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.

TABLE OF CONTENTS

This manual may contain images or content that may be different from the model you purchased.
This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTION
READ ALL INSTRUCTIONS BEFORE USE…………………………………………………..3 WARNING ………………………………………………………………………………………………3 CAUTION ……………………………………………………………………………………………..10
INSTALLATION
Product Overview…………………………………………………………………………………12 Installing the Charging Station …………………………………………………………….16 Storing the Accessories ………………………………………………………………………..18
OPERATION
Getting Started …………………………………………………………………………………….20 Charging the Battery ……………………………………………………………………………21 Using the Mop Nozzle ………………………………………………………………………….22 Using the Nozzles and Tools…………………………………………………………………26
MAINTENANCE
Cleaning the Appliance ………………………………………………………………………..29 Cleaning the Nozzles ……………………………………………………………………………32
TROUBLESHOOTING
Before Calling for Service……………………………………………………………………..35

ENGLISH

SAFETY INSTRUCTION 3
SAFETY INSTRUCTION
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into WARNING’ andCAUTION’ as described below.
Safety Messages
This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.
WARNING
WARNING
· To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Technical Safety · This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person

4 SAFETY INSTRUCTION
responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. · Do not allow the appliance to be used as a toy. Close attention is necessary when used by or near children. · Do not allow children to play with or hang on the appliance. · Do not use the appliance with damaged power cord or plug. The cord must be replaced. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre. · Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. · Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. · Place the cords from other appliances out of the area to be cleaned.
Battery · Never use the battery, adapter, and the charging station from other
appliances with this appliance. Use only the battery and the charging station provided by LG Electronics. · Never use the battery, adapter, and the charging station from this appliance with other appliances. · Unplug the power cord and remove the battery if the appliance will not be used for an extended period of time. · Do not use modified or damaged batteries. · Do not disassemble, remove or short-circuit the battery. · When disposing of the battery or the appliance, remove the battery from the appliance and safely dispose of it. · Have specifically designated battery packs replaced when it is no longer able to hold a charge. · Refer to the Charging the Battery section instructions for the method of replacing the battery.

ENGLISH

SAFETY INSTRUCTION 5
· When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries.
· Follow all local ordinances and regulations when handling or disposing of the battery.
· Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.
· Disconnect the battery pack from the appliance before making any adjustments, changing accessories, cleaning, serviing, or storing appliance.
· When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
· Under abusive conditions, liquid may be ejected from the battery. If this happens, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
· If the appliance is to be stored unused for a long period, the batteries should be removed.
· Before removing the battery, you must turn off this appliance. · When fitting the battery into the product body, insert it completely
until it clicks.
Battery Specifications · One or two batteries are provided, the number of batteries varies
depending on the model purchased. – Model Name: EAC63382208 – Type: Rechargeable Lithium-ion Battery
– Rated Capacity: 25.9 V%, 2400 mAh
Installation · To avoid an electrical shock or fire, do not install, charge or store the
appliance where it may be exposed to water, rainfall or high humidity.

6 SAFETY INSTRUCTION
· Install, charge and store the appliance in a well-ventilated place.
· Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust.
· Do not store or install the appliance, power cord or plug near heating devices or open flames.
· Install the charging station on a firm, level surface.
· To prevent tipping, floor standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double- sided tape.
· In wall-mounted mode installations, the charging station should be secured tightly to the wall using the provided wall anchoring screws.
· Use the anchoring screws only when attaching to concrete or similar solid surfaces.
· Never drill into a wall without first checking that the area behind it is free from power conduits, plumbing, vents, or cables.
· Do not use or store the appliance at temperatures below 5 or above 38 .
· Do not store or install the appliance where it is exposed to temperatures below freezing or exposed to outdoor weather conditions.
· When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord or plug.
Operation
· Read all instructions before using the appliance, and save these instructions.
· Use only as described in this manual. Use only manufacturer’s recommended attachment.
· This appliance is designed for normal indoor domestic use only. It is not to be used for any non-residential, commercial, or industrial application.

ENGLISH

SAFETY INSTRUCTION 7
· This product should only be used with a 100 – 240 V~ 50/60 Hz, 0.8 amp outlet. Make sure to check the power specifications of the place where you intend to use the appliance.
· Do not handle the power cord, plug, or appliance controls with wet hands.
· Wipe any moisture or dirt off the cord or plug with a dry cloth.
· Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance.
· Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.
· Do not use multiple-outlet adapters with this appliance. Make sure to use a power socket with a capacity of 10 A.
· Do not plug the appliance into a damaged or loose outlet.
· Make sure to unplug the power cord when the appliance is not to be used for an extended period of time.
· Do not damage, alter, excessively bend, twist, pull, pinch or heat the power cord.
· Before using the appliance, remove any wire or string on the floor.
· Avoid touching the prongs of the power plug with your finger(s) when unplugging the power cord.
· Do not cover the power cord with a rug or carpeting.
· Push the power plug firmly into the wall outlet so that it is not loose.
· If the product has been submerged, contact an LG Electronics service centre or dealer for instructions before resuming use.
· If the product makes a strange noise or emits an odour or smoke, discontinue use and contact an LG Electronics customer information centre.
· Only qualified technicians or service personnel from LG Electronics may disassemble, repair or modify the appliance.
· Never insert a sharp metallic object such as a pin, nail or knife in a hole or gap in the appliance or the charging station.

8 SAFETY INSTRUCTION
· Do not vacuum liquids with this appliance. Make sure that no water, beverage or detergent gets inside the appliance or the charging station.
· Do not allow the appliance to sweep up blades, thumb tacks, sawdust, sharp objects, or hot or cold ashes.
· Do not allow children to use the appliance.
· Do not let children or pets get close to the appliance when using, charging or storing.
· Do not insert the nozzle or tools in your mouth.
· Keep clothing and hair, fingers, or other parts of the body away from openings and moving parts.
· Do not operate the appliance with the suction inlet or outlet blocked.
· Do not use the appliance without the dust bin and filters in place.
· Do not use in an enclosed space where vapors are present from paint thinner, mothproofing substances, flammable dust or other explosive or toxic materials.
· Do not touch the charging terminals on the appliance or the charging station, or insert an electrified object inside the appliance or the station.
· Always store the appliance on the floor standing or wall-mounted charging station when it is not in use.
· Do not lean the appliance on walls, chairs or tables.
· If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre.
· Use extra care when cleaning on stairs.
· Do not use or store a heating device or flammable substance(ether, benzene, alcohol, chemicals, combustible sprays, insecticide, air freshener or cosmetics) in close proximity to the appliance.
· Do not attempt to clean up a liquid substance (water, beverage), odourous substances (candy, chocolate, pet excrement), metallic objects (blades, pins), flammable substances, burning/ smoking(cigarettes, matches, or hot ashes), surfactants, or glass shards with this appliance.

ENGLISH

SAFETY INSTRUCTION 9
· In the event of a gas leak(natural gas, propane gas, etc.), do not operate this or any other appliance. Open a window or door to ventilate the area immediately.
· Do not hold the charging station upside down with the battery in the charging station.
· Do not expose the appliance, and the battery in particular, to heat, a heating device or direct sunlight.
· Do not keep the appliance or its battery inside a vehicle which is exposed to direct sunlight.
· Never allow any water, beverage or detergent to get inside the battery.
· Do not apply physical impacts to the battery.
Maintenance · Make sure to unplug the power cord when cleaning or maintaining
the charging station. · Do not wash the inlet port or the dust bin with water or detergent. · Do not use detergents, polishes or air fresheners to clean the dust
bin. · Do not apply or spray a flammable substance (gasoline or thinner) or
surfactants (detergent or bath soap) on the appliance. · Wash hands after handling nozzles. The nozzles contain carbon fiber,
and contact may cause minor skin irritation.
Disposal · Keep packing materials out of the reach of children. Packaging
materials can pose a suffocation risk for children. · Destroy the carton, plastic bag, and other packing materials after the
appliance is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. · Dispose of this appliance according to local, state, and regional laws and regulations.

10 SAFETY INSTRUCTION
· Contact your local city council or the related government authority before disposing of this appliance.
Mop Nozzle · Do not vacuum sharp objects (glass pieces, wire, blades, pins, etc.)
with the mop nozzle attached. When cleaning the mop pads after mopping, you could be injured by a sharp object embedded in the mop.
CAUTION
CAUTION
· To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following:
Operation · This appliance has a built-in safety device to prevent damage from
overheating. If the appliance becomes overheated after extended use, it may automatically turn off. If this occurs, leave the appliance in a cool, well- ventilated area for about an hour before turning on the power again. · Do not subject the product to shocks or drop it. · Do not install wet or damp filters. · Always use a soft cloth to clean the appliance. Do not clean the product with a volatile or organic solvent(thinner or acetone). · Do not clean the same spot repeatedly for an extended period of time. Doing so may damage the carpet or flooring surface. · Keep fingers away from pinch points when assembling the appliance or the charging station. · Do not use the double- sided tape to anchor the charging station on wallpaper. Use the provided screws to anchor the charging station. The weight of the charging station and the appliance could damage the paper.

ENGLISH

SAFETY INSTRUCTION 11
· Do not apply force or any impact to the Cyclonic Mesh Filter. · Do not remove the battery during operation.
Mop Nozzle · Do not use the mop nozzle for any purpose(for example, polishing a
car, cleaning windows) other than domestic floor cleaning. · Do not use the mop nozzle to vacuum up liquids(water, beverage). · When using the mop nozzle, always attach the mop pads. · Do not clean a coated, rough or delicate floating floor and carpets
with the mop nozzle. · Do not use the mop nozzle to clean the same spot repeatedly for an
extended period of time. The water injection at the mop nozzle may cause water to get into the dust inlet and damage the appliance. · Do not step on the mop nozzle. · Wet floors can pose a slip hazard. Allow floors to dry completely before allowing anyone to walk on them. · Do not store the appliance by attaching the water tank filled with water to the mop nozzle.

12 INSTALLATION
INSTALLATION
Product Overview
The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.
Front View
*1 This feature is only available on some models.

a Charging Station b Spare Charging Station c Battery (Dual Battery1) d Product Body e Extension Pipe f Nozzle g Floor Stand Dock h Floor Stand Pipe i Adapter j Detachable Nozzle Storage1

k Tool Holders l Exhaust Filter m Pre-filter n Cyclonic Mesh Filter

ENGLISH

Accessories

Nozzles

*1 This accessory is only available on some models.
Included Accessories

INSTALLATION 13

a Multi-Surface Nozzle1 b Slim Hard Floor Nozzle1 c Bedding Nozzle1 d Pet Nozzle1
Installation Kit

a Charging Station b Extension Pipe c Adapter d Pre-filter e Battery (Dual Battery1) f Floor Stand Dock1 g Floor Stand Pipe*1
Basic Accessories
a Combination Tool b Crevice Tool

a Wall Anchoring Block1 b Double-Sided Tape1 c Drywall Anchor1 d Wall Anchoring Screw1 e Stand Anchoring Screw*1
Tools and Accessory Bag

14 INSTALLATION
a Hard Dirt Tool1 b Mattress Tool1 c Multi-angle Tool1 d Flexible Crevice Tool1 e Flexible Hose Extension1 f Accessory Bag1
Mop Kit

a Mop Nozzle1 b Detachable Nozzle and Mop Pads Storage1 c Mop Pads for General Cleaning1 d Measuring Cup1
NOTE
· The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Contact an LG Electronics customer service centre.

Specifications
Appliance

Model

A9N*****

Dimensions (Width X 260 mm X 270 mm x 1120 mm Depth X Height)

Weight

Approximately 2.7 kg

Power Consumption

370 W in Turbo Mode (Maximum 480 W) 250 W in Power Mode 80 W in Normal Mode

Battery Run Time (Using two battery)

Using with the Nozzle*1 Up to 12 minutes in Turbo Mode Up to 22 minutes in Power Mode Up to 80 minutes in Normal Mode

Using with the Tool Up to 12 minutes in Turbo Mode Up to 22 minutes in Power Mode Up to 100 minutes in Normal Mode

Battery Run Time (Using one battery)

Using with the Nozzle*1 Up to 6 minutes in Turbo Mode Up to 11 minutes in Power Mode Up to 40 minutes in Normal Mode

Using with the Tool Up to 6 minutes in Turbo Mode Up to 11 minutes in Power Mode Up to 50 minutes in Normal Mode

· Dimensions are given for the assembled product body, extension pipe and nozzle.

INSTALLATION 15

· Suction power is an average of suction power with IEC 62885-2, 5.8 standard tested by an independent test lab. Individually measured data would be different from a lab test result.
· Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.
*1 The Nozzle contains the direct drive motor that rotates the nozzle cleaning head directly.

ENGLISH

Charger Adaptor

Model Input Output

ADC-30FSA-30 29430EPB 100 V – 240 V~, 50/60 Hz, 0.8 A
DC 29.4 V%, 1.0 A

16 INSTALLATION
Installing the Charging Station
Self-Standing Installation
Follow the steps below to install the charging station on a hard and level floor.
1 Place the floor stand dock on a hard and level
floor and assemble the floor stand pipe.

4 Assemble the charging station onto the top of
the floor stand pipe.

2 Clip the power cord tidily into the cord keeper
a on the back of the floor stand pipe.

5 Connect the power adapter to the port on the
back of the charging station.

3 Slide the detachable nozzle storage onto the
floor stand pipe.
· Make sure not to pinch or tangle the power cord behind the mop pads storage.

6 Drill a hole in the wall and insert the drywall
anchor b if needed.
· Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location.
· For drywall anchor: use 1/4 (6.5 mm) drill bit
· For concrete or wall stud: use 1/8 (3 mm) drill bit
· If screwing into drywall, use the drywall anchor.

7 Align the wall anchoring block c of the
charging station, and fix the charging station

to the wall by tightening the anchoring screw
d all the way.

INSTALLATION 17
2 Attach the second piece of double-sided tape
to the other side of the wall anchoring block to secure it to the wall. · Do not use double-sided tape on wallpaper.

ENGLISH

8 Plug the power cord into the power outlet.

NOTE
· The charging station can be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station.

Wall-Mounted Installation
For wall-mounted installations, the charging station must be attached securely to the wall using the provided(short) wall anchoring screws.
· The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation.
1 Connect the power adapter to the port on the
back of the charging station.

Using Double-Sided Tape to Secure the Appliance
1 Use the double-sided tape a to attach the wall
anchoring block b to the charging station.
· Remove the centre section of double-sided tape before attaching it to the wall anchoring block.

2 Drill 2 holes and insert the drywall anchors(if
needed) at least 1 m from the floor and near enough to easily reach a power outlet. · Before drilling, make sure that there are no
pipes or electrical wires inside the wall at the desired location.
· For drywall anchor: use 6.5 mm drill bit
· For concrete or wall stud: use 3 mm drill bit

18 INSTALLATION
· If screwing into drywall, use the drywall anchors.

3 Separate the extension pipe and nozzle from
the product body before charging or storing the appliance.

N

4 Plug the power cord into the power outlet.

3 Attach the charging station to the wall with the
wall anchoring screws.

CAUTION
· Leaving the appliance on a level floor for a long time with the extension pipe and nozzle attached may damage the appliance.

4 Plug the power cord into the power outlet.
Compact Installation
For safety and convenience, install the charging station using the self- standing or wall-mounted installation methods. If you choose not to install the charging station, place it on a level floor for charging or storage.
1 Connect the power adapter to the port on the
back of the charging station.

Storing the Accessories
Storing the Tools
Store the frequently used tools such as the combination tool, crevice tool and cleaning brush at the bottom of the charging station. · Slide the combination tool and crevice tool onto
the tool holder. · To remove a tool, press the release button at the
front of the tool.

2 Place the charging station on a hard and level
floor.

Storing the Nozzles
When a nozzle is not in use, store it in the convenient detachable nozzle storage so you can easily find it.

ENGLISH

INSTALLATION 19

· The nozzle storage cradle is compatible with the · Store the mop pads completely in a dry state.

Slim Hard Floor Nozzle or the Bedding Nozzle.

Otherwise, it can result in an unpleasant odour.

Assembling the Appliance
Follow these steps to safely assemble the appliance.
1 Firmly attach the extension pipe c, nozzle d,
or tool onto the product body a.
· To detach the extension pipe, press the
extension pipe release button b.

2 Put the product body on the charging station.
· See Charging the Battery for instructions on installing and charging the battery.

Storing the Mop Pads
Up to 2 mop pads can be stored in the detachable mop pads storage.

20 OPERATION

OPERATION

Getting Started
Before Using the Appliance
· Support the bottom of the appliance when cleaning an elevated surface.
· To avoid scratches on polished floors, keep tools and the brushes and rollers of the nozzles free from hair, grit, sand, or abrasive objects.
· Make sure that the exhaust filter or pre-filter is properly assembled before using the appliance.
· Close the dust bin cover properly before using the appliance. If the dust bin cover is left open, the suction strength may deteriorate and affect the cleaning results.
· Store the appliance in the charging station or place it flat on the floor when not in use. Leaning the appliance against a wall or chair can result in product damage or personal injury if the appliance falls.
· Environmental conditions such as temperature and humidity may cause static electricity to accumulate on the appliance. Please contact LG Electronics customer information centre if the problem persists.
· Make sure to remove any foreign object such as a sock or stocking before using the appliance. Any foreign object on the inlet port or extension pipe will prevent the appliance from functioning properly.
· Please use the product at normal room temperatures as the battery runtime may deteriorate severely if used at temperatures lower than 5 or higher than 38 for an extended period of time.
· The battery runtime is dependent on the surface type and the suction power.
· Follow manufacturer’s recommendations when cleaning flooring, carpets, and rugs.
· Refer to the Specifications section for battery runtime details.

Assembling Attachments
Nozzles and tools can be attached to either the product body or the end of the extension pipe.
1 Insert the fully charged battery a into the
cavity at the bottom of the handle on the product body and push the battery until it clicks. · If it is not properly inserted, the battery may
fall out, causing product to malfunction or personal injury.
2 Attach the nozzles, tools, or extension pipe by
sliding them onto the inlet b on the body until
they click into place. The nozzles and tools can also be attached to the end of the extension
pipe b.
· Detach the accessories by pressing the
release button c.
3 Adjust the extension pipe by pressing the
length adjustment button d on the back of the
pipe and sliding until it clicks into place at the desired length.

· The extension pipe extends in four steps.

OPERATION 21
· Press the – button to decrease the suction
power. (Turbo~Power~Normal)

ENGLISH

Charging the Battery

4 Press the Power button to activate the Normal
mode. · To turn off the appliance, press the Power
button again.
Adjusting the Suction Power
Adjust the suction power using the suction power adjustment button on the handle.

Before Charging the Battery
· Make sure that the adapter is connected to both the charging station and the power outlet.
· Fully charging a single battery usually takes 4 hours. It will take twice as long to charge both the main and spare batteries.
· The battery will not be charged if the indoor temperature is below 5 . Only charge the battery when indoor temperatures are between 5 and 38 .
· The battery will eventually need to be replaced. Due to the battery characteristics, runtime is shortened after using the appliance repeatedly for an extended period.
· If the main battery is charging on the charging station, the spare battery will only start charging once the main battery is fully charged.
· To maintain battery life on dual-battery models, swap the positions of the two batteries periodically, between the main body and the spare charging station.

a Power Button
· Press the Power button to turn the appliance on or off.
· Press the Power button to activate Normal mode.
b Suction Power Up (+) Button / Turbo Mode
· Press the + button to increase the suction
power. (Normal~Power~Turbo)
· Press and hold the + button for more than 3 seconds to activate Turbo mode from Power mode.
c Suction Power Down (-) Button

Battery Level Indicator
The remaining battery level is shown on the battery
level indicator a above the handle of the product
body.
· The remaining battery level is displayed in 3 stages according to the remaining battery power.
· The battery level indicator flashes when the battery needs to be charged.
· As the product is charging, 3 bars light up on the battery level indicator to indicate the level of charge.

22 OPERATION

· Once the battery is fully recharged, 3 bars will remain lighted on the battery level indicator.

CAUTION
· Keep fingers away from pinch points when assembling or disassembling the battery from the product body or the charging station to avoid personal injury.

1 Remove the discharged battery from the
product body by pressing the battery release button on either side of the battery and pulling.

Charging the Product Body
Storing the appliance on the charging station automatically recharges the battery.
1 Press the Power button to turn the appliance
off.

2 Put the product body onto the charging station
by aligning it to the hook a of the charging
station.
· The battery level indicator starts to flash and begins charging the battery.

2 Insert the discharged battery into the spare
charging station. · The battery will only fit into the cavity if
aligned properly.
· The spare charging indicator blinks while recharging is in progress.
· The spare charging indicator lights up when charging is complete.

CAUTION
· Make sure to securely fit the product body onto the charging station. If the appliance falls off the charging station, it could cause injuries, property damage or product damage.
Charging the Spare Battery
An spare battery can be stored and charged in the base of the charging station.

Using the Mop Nozzle
Before Using the Mop Nozzle
· The mop pads only rotate at one speed regardless of what suction power setting the product body is set to.
· To prevent product damage, the mop attachment plate will automatically stop if there are foreign objects stuck in the plate or if it is subjected to a strong impact. Turn the appliance

OPERATION 23

ENGLISH

off immediately and remove the foreign objects or obstructions before resuming use.
· If you hear a noise while mopping, the mop pad may have dropped off the mop attachment plate. Turn off the product immediately and reattach the mop to the attachment plate before resuming use.
· Do not use a soiled mop pad to clean floors.
· Use only authorized LG Electronics mop pads.
· Empty the dust bin and clean the exhaust filter and the pre-filter after using the mop nozzle.

· If you use the mop nozzle for a long time with the suction off, the motor may overheat (recommended duration of use: 80 minutes). When the moter overheats, the overheating prevention function is activated and the appliance is automatically turned off. Use the appliance after cooling the heat for about one hour in a cool, well-ventilated place.
Filling the Water Tank
1 Press the PUSH button a to remove the water
tank from the mop nozzle.

Using the Wet Mop Pads
Press the Power button. You can use the only mop mode and not turn on the dust suction function.
· Press the ~ button to turn on the dust suction
function.
· Press the ! button once while pressing the ~
button once to turn off the dust suction function.

2 Open the water inlet cap b on the side of the
water tank and fill the tank with water using
the measuring cup c.
· Open only one water inlet cap to fill the water. Opening both caps may cause the water to flush.
· Do not fill the tank over the MAX line d.
· Do not put liquid other than water and hot water in the water tank.

CAUTION
· Do not assemble or disassemble the nozzle while the appliance is turned on. Doing so may result in injury.
· Set the water adjustment button to the STOP position when not using the appliance for an extended period of time. Failure to do so may result in product failure.
· Do not let the appliance stand on the floor while the wet mop pads are attached. Doing so may result in damage or swelling to wood flooring.
· Do not use on PVC or PU mat for infants or children. Friction can cause the motor to overheat.

3 Close the water inlet cap tightly.
· If the water inlet cap is not closed properly, water may leak.

24 OPERATION

4 Attach the water tank to the mop nozzle again.
· Insert the 2 tabs e at the front of the water tank into the slots f on the top of the mop nozzle. Press down at the centre g to lock
the tank in place.

Adjusting the Amount of Water
Press the water adjustment buttons to adjust the amount of water released onto the mop pad to either High Mode or Low Mode.

Attaching the Mop Pads
1 Wet both sides of the mop pads with water
then squeeze out any excess water before attaching the pads. · Do not attach pads while they are dripping
wet.
· Attaching and using mop pads while they are dry may affect the cleaning results.

· High Mode: Press the High Mode button a all
the way down to clean ingrained dirt or supply a large amount of water.
· Low Mode: Press the Low Mode button b all the
way down to supply a small amount of water for cleaning wood or other flooring that can be damaged by too much water.
· STOP: Press the Low Mode or High Mode button halfway to toggle back to the STOP position. This stops the supply of water so you can go over areas that are already wet.
WARNING
· To avoid injury, do not attach the mop pad while the mop attachment plate is rotating.

2 Place the mop nozzle upside down on the floor.
3 Align and attach the centre of the mop pad
with the centre of the mop attachment plate. · Attach the Velcro on the mop pad to the mop
plate. Attaching the mop pad upside down or improperly may affect the cleaning results.

CAUTION
· Do not let the appliance stand on the floor while the wet mop pads are attached. Doing so may result in damage or swelling to wood flooring.
Using with the Mop Nozzle
1 Attach the water tank and mop pads to the
mop nozzle.

2 Set the water adjustment button to the STOP
position.

3 Press the Power button to start cleaning.

4 Attach the mop nozzle to the appliance.

ENGLISH

OPERATION 25

Drying the Water Tank and Mop Pads
Drying the Water Tank
When cleaning is completed, make sure to empty the water tank and dry it before storing the mop nozzle.

Shake the water tank to remove the remaining water.

CAUTION
· Turn the water inlet caps to make sure they remain open when storing the water tank. If caps are closed and not properly dried, it may cause odour.
· Do not remove the water inlet caps from the water tank. Caps may tear.
· Do not add detergent, vinegar or baking soda to the water tank when washing. It is not easily removed in the water tank, which may soil the floor.
· After cleaning, wipe off any remaining water on
the water supply inlet a on the mop nozzle with
a soft cloth. The water could drip onto the floor and damage it.

2 Leave the 2 water inlet caps open and allow the
water tank to dry in a well-ventilated area out of direct sunlight for at least 24 hours.
· Keep the water tank after water is completely empty and dry. Moisture or residual water in the tank may cause odour.

· Do not pull or stretch the rubber gasket on the water supply inlet. Doing so may tear or damage it.
1 Open the 2 water inlet caps a on the side of
the water tank and empty the water tank.

Drying the Mop Pads
After using the mop pads, hand wash them and allow them to dry before storing them.
CAUTION
· Do not use as follows, as it may become deformed. – Do not use bleach or fabric softener when washing the mop pads. – Do not dry the pads in a clothes dryer. – Do not boil the mop pad.

1 Separate the mop pads from the mop
attachment plate.

2 Hand wash the pads with a neutral detergent.

26 OPERATION

· Storing mop pads in a damp state can result in an unpleasant odour. Set the pads in a well-ventilated area out of direct sunlight for at least 24 hours or until completely dry.

· While cleaning, it was not intended, but pressing the PUSH button on the nozzle may remove the brush. Please attach the brush again.

Pet Nozzle
It is suitable for soft surfaces and pet hair removal.

Using the Nozzles and Tools
Before Using the Nozzles and Tools
Some accessories are only available on some models. Specialized attachments can help you clean more effectively. Tools and nozzles can be attached to the product body or the extension pipe.
· Adjust the suction power if the inlet gets stuck on the floor, carpet, or bedding.
· Each Nozzle is equipped with a motor and may make a sound when operating.
CAUTION
· Do not use the Multi-Surface Nozzle or Slim Hard Floor Nozzle on PVC or polyurethane mats for infants and children. The mat may stick to the nozzle, making it difficult to operate, causing damage to the mat or static electricity on the appliance. Clean mats using the crevice tool.

CAUTION
· Do not use the nozzle following surface. It may cause scratch or damage. Especially, do not clean a coated or lacquered floor. If used repeatedly, the coating may wear off. – Clothing, bedding – Leather cushioned sofas, cushions – Carpet – Vinyl flooring, tiles, marble, etc.
Bedding Nozzle
This nozzle lets you clean sheets and bedding more effectively. It removes dust in bedding using strong suction and a punching motion. · Lower the suction level when vacuuming
bedding such as duvet covers to avoid the thin fabric getting sucked into the nozzle.

Multi-surface Nozzle
Use this nozzle to clean carpets or rugs. · If used on hard flooring, this nozzle will be noisy.
Slim Hard Floor Nozzle
Use this nozzle to clean hard floor surfaces.

OPERATION 27

Crevice Tool
Use this tool to remove dust from corners or narrow spaces.
· Use it for areas with static electricity such as mats.
· Use it with the Turbo mode to clean pet hair out of furniture, mats, or tight areas like corners.

Hard Dirt Tool
Firm bristles remove solidified dirt from hard surfaces. Clean up hair or foreign objects that are entangled in carpets or rugs.

ENGLISH

Combination Tool
Can be used in either crevice mode or brush mode for cleaning corners or small gaps where dust and dirt gather.
· Crevice Mode Use the tool in the crevice mode to clean flat surfaces such as sofas or mattresses.

Mattress Tool
Use this tool to clean up dust and foreign objects from mattresses, delicate fabrics, and upholstery.

· Brush Mode
Use the tool in the brush mode to clean delicate surfaces such as frames or furniture.
– To convert modes, press the adjustment
button a and push forward.

Flexible Crevice Tool
This tool is flexible and its length can be adjusted, making it especially useful for cleaning inside vehicles or in narrow spaces under and behind furniture where an angled tool is needed.

Using the Brush To convert the tool from crevice to brush mode,
press in on the sides of the brush head a and pull
the brush down.

28 OPERATION

· To convert back to the crevice mode, press in on
the brush release button b and slide the brush
up.

· The flexible hose extension cannot be used with the Nozzle.

Adjusting the Length To adjust the length of the tool, press and hold the
release button c on the side of the tool. Pull or push on the brush head d to extend or retract the
extension tube.

Multi-angle Tool
This tool has a soft brush that can be adjusted to a variety of angles, making it especially useful for cleaning vehicle consoles or the tops of furniture.

Flexible Hose Extension
Connect this flexible, extendable hose between the product body and the tools to clean hard to reach areas.

MAINTENANCE 29

MAINTENANCE

ENGLISH

Cleaning the Appliance
Before Cleaning the Appliance
To maintain the optimum suction power, the cyclonic mesh filter, the exhaust filter and the prefilter should be cleaned regularly and washed under running water at least once a month.
· Turn off the power before cleaning the appliance.
· The frequency of cleaning varies depending on the usage environment and usage time. In a dusty environment, clean frequently.

from Hi to Lo power) a few times to alert you to the blocked airflow. The appliance will then automatically turn off to prevent damage. Separate the battery from the product body and remove the foreign objects before resuming use of the appliance.

WARNING
· Never wash the nozzle, rotating brush or product body with water. Water could reach the motor and cause electric shock or fire.
· Do not allow foreign objects to enter the motor. Doing so may cause electric shock, fire or product damage.
· Do not insert fingers or sharp objects into the motor. Doing so could cause product damage, personal injury or electric shock.
CAUTION
· Do not apply force or allow impacts to the cyclonic mesh filter. Doing so could deform the filter, compromise product performance, or cause the product to malfunction.
Removing Foreign Objects
In order to maintain product performance, be sure to remove any foreign objects and dust from inside the product body, extension pipe or air inlets. · Foreign materials inside the product can cause
the product to be noisy, have poor suction, or shut down during operation. · If the inside of the product body, extension pipe, inlets, pre-filter, or exhaust filter is clogged with foreign objects, the power will surge (alternating

Cleaning the Dust Bin
Empty and clean the dust bin after every use.
· If the dust bin is completely full of dust or the filter is clogged, the suction power may be reduced.
1 Remove the battery from the product body
before cleaning the dust bin.
2 Press the dust bin cover release button a to
open the dust bin cover. Shake the dust bin to empty it. · Be careful as dust or foreign objects may
spill out when opening the dustbin. Empty the dust bin into a wastebasket or where

30 MAINTENANCE
dust and foreign objects can be easily removed.

5 Use the combination tool to clean out dust or
foreign objects inside the dust bin.

3 Insert the crevice tool c into the Cyclonic Mesh
Filter b and turn it counterclockwise to remove
the filter.

WARNING
· Never wash the product body with water. Water could reach the motor and cause electric shock or fire.
· Do not use the product body to suck up oils or any liquids, including water.
· Do not use the appliance without the Cyclonic Mesh Filter installed. Doing so could damage the product.
· Do not insert fingers or sharp objects into the motor to avoid product damage, personal injury, or electric shock.
· Do not allow foreign objects to reach the motor to avoid product damage, explosion or fire.

4 Wash the Cyclonic Mesh Filter under running
water.
· To avoid odour and the malfunction of the motor, allow the Cyclonic Mesh Filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

CAUTION
· Do not apply force or allow impacts to the Cyclonic Mesh Filter. Doing so could deform the filter, compromise product performance, or cause the product to malfunction.
Cleaning the Filters
Clean the pre-filter and exhaust filter regularly and wash them in running water at least once a month to maintain the optimum suction power of the appliance. · Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
1 Remove the battery from the product body.

2 Rotate the exhaust filter a to the unlocked
position b to separate it from the product
body.

MAINTENANCE 31
direct sunlight for at least 24 hours before reassembling.

ENGLISH

3 Lift out the pre-filter c from the product body.

6 Clean the pre-filter by brushing the dust off it
regularly and wash it in running water at least once a month.
· To avoid odour and the malfunction of the motor, allow the pre-filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

4 Use the combination tool d to clean any dust
off the motor.
· Do not wash the motor with water.

7 Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position e to
reassemble it on the product body.

5 Clean the exhaust filter by brushing the dust
off it regularly and wash it in running water at least once a month.
· To avoid odor and the malfunction of the motor, allow the exhaust filter to dry completely in a well-ventilated area out of

CAUTION
· Do not use the appliance without the exhaust filter and pre-filter installed. Doing so could result in product damage.

32 MAINTENANCE

Cleaning the Nozzles
Clean the nozzle and rotating brush regularly.

3 Pull the brush cover forward and pull the brush
out.

CAUTION
· Always separate the nozzle from the product body or remove the battery before cleaning. If the nozzle starts to operate during cleaning, it could cause an injury.
· Keep fingers away from pinch points when assembling the nozzle on the appliance or the rotating brush on the nozzle.
· Do not use the rotating brush as a wet mop. It may cause product damage.
· Do not rinse or submerge the rotating brush or nozzle in water. It may cause product damage.

4 Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and dust from the brush and the bottom of the nozzle.

Cleaning the Carpet Nozzle
Clean the brush and roller heads before each use.
· If the brush contains foreign objects, the brush may not spin or a noise may occur during operation.
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product body.

5 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the brush and the bottom of the nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.

2 Turn the nozzle upside down and rotate the
cover lock slot b counterclockwise.

6 Slide the brush back into the nozzle and rotate
the cover back into place. Turn the cover lock clockwise to lock the cover.

ENGLISH

Cleaning the Slim Hard Floor Nozzle
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product body.

MAINTENANCE 33
foreign objects, debris and hair from all Rollers of the nozzles using tweezers.

2 Turn the nozzle upside down and remove the
rotating brush while holding down the PUSH button on the nozzle.

5 Slide the brush back into the nozzle until it
clicks into place.
Cleaning the Pet Nozzle
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product body.

3 Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and dust from the brush and the bottom of the nozzle.

2 Remove the rotating brush while holding down
the PUSH button on the nozzle.

4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the brush and the bottom of the nozzle. Remove

3 Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and dust from the brush and the bottom of the nozzle.

34 MAINTENANCE
4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the brush and the bottom of the nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.

hair from all Rollers of the nozzles using tweezers.

5 Insert the left side of the brush b into the
groove c inside the nozzle.

Cleaning the Mop Nozzle
1 Press the nozzle release button to remove the
mop nozzle from the extension pipe and turn the nozzle upside down.

6 Press the cover of the brush to lock the brush
until a clicking sound is heard.

2 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the bottom of the mop nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.

Cleaning the Bedding Nozzle
1 Press the nozzle release button to remove the
nozzle from the extension pipe or product body and turn the nozzle upside down.
2 Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and dust from the bottom of the nozzle. Use a damp towel or cloth to remove any remaining foreign objects and dust from the bottom of the nozzle. Remove foreign objects, debris and

TROUBLESHOOTING 35

TROUBLESHOOTING

ENGLISH

Before Calling for Service
Operation

Symptoms

Possible Cause & Solution

The appliance does not Battery is fully discharged.

operate.

· Charge the battery.

Appliance is turned off. · Press the Power button to turn on the appliance.

Suction power is too weak.

Dust bin is full of dust. · Empty the dust bin.

Filters are clogged. · Clean the pre-filter and the exhaust filter.

Inlet is clogged.
· Remove any foreign objects from inside the product body or the extension pipe.

Foreign object is on rotating brush, or in inlet port.
· Remove any foreign objects (thread, hair) from the rotating brush or the inlet port.

The product body does not appear to be charging.

Power cord is unplugged. · Plug the power cord securely into the outlet
Foreign object is on the charging terminals. · Remove dirt or foreign objects from the charging terminals with a dry
cloth.

Hot air is coming from the product body.

Motor is cooling.
· If the appliance is running normally, the hot air is a result of the motor cooling and is not a sign of malfunction.

36 TROUBLESHOOTING

Symptoms

Possible Cause & Solution

A strange odour is coming from the appliance.

Appliance was purchased within the last 3 months. · The cleaner may emit a smell of rubber for about 3 months after purchase. Dust bin is full of dust. · The dust in the bin may cause some odour. Empty the bin and clean it.

Foreign object is on the filter.
· The filter may emit an odour if it has not been cleaned for some time. Clean the pre-filter and exhaust filter regularly.

Pre-filter, Fine dust filter or the Cyclonic Mesh Filter were installed while damp or wet.
· Wash the filters with running water. To avoid odour, allow the pre-filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

Exhaust filter was installed while damp or wet.
· Wash the exhaust filter with running water. To avoid odour, allow the exhaust filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

The appliance makes too much noise.

Vacuum cleaner is running in Turbo mode.
· The motor may be louder at the higher suction power settings. This is normal.

The appliance turns off unexpectedly or by itself after the motor speed fluctuates repeatedly.

Battery is not fully charged.
· The battery must be fully charged before cleaning. If the problem persists when the battery is fully charged and the pipes and attachments are clear from obstructions, contact an LG customer information centre for service.
Foreign object is in the product body, extension pipe, inlet port or nozzle.
· Remove any foreign objects from the product body, extension pipe, inlet port or nozzle.

Filters are clogged. · Clean the pre-filter and the exhaust filter.

The rotating brush does not rotate.

Brush is improperly installed. · Remove the brush, clean it if necessary and attach it again.

Foreign object is on rotating brush. · Remove any foreign objects from the rotating brush.

TROUBLESHOOTING 37

ENGLISH

Mop Nozzle

Symptoms

Possible Cause & Solution

The mop pad attachment plate does not rotate.

Mop pads are improperly installed. · Remove the mop pads, clean them if necessary and attach them again.
Mop nozzle is pressed too hard against the floor. · The mop attachment plate stops automatically to protect the product. This
is not a failure. Attach the mop pads securely to the mop attachment plate and press the power button to resume use.

Foreign object is between mop attachment plate and mop pads.
· Remove foreign objects from the mop nozzle attachment plate and press the power button to resume use.

There is no water coming out of the mop nozzle.

Water tank is empty.
· Fill the water tank. Remove the battery or detach the nozzle before filling the water tank.

Water tank is improperly attached to mop nozzle.
· Properly attach the water tank to the mop nozzle. Remove the battery or detach the nozzle before properly securing the water tank to the nozzle.

Water supply adjustment button is set to STOP.
· Press the High or Low water adjustment button all the way down. The water will not come out if the button is set to STOP.

The water outlet was clogged by hard water scale or other foreign substances.
· Use a sharp pin to remove the blockage.

There is moisture in the water tank.

Water tank is not allowed to dry completely after use.
· Empty the water tank, set it out of direct sunlight, and allow it to dry completely after use.

A strange odour is coming from the appliance.

Foreign object is on the dust inlet of the mop nozzle.
· Wet dust in the mop nozzle may result in odour. Make sure to wipe the dust inlet of the mop nozzle with a wet wipe after each use.

Mop pads make the floor dirty.

Mop pads are not cleaned properly after use.
· Clean the mop pads thoroughly after each use. Using soiled mop pads may make the floor dirtier.

The appliance makes too much noise.

This is the sound generated when the pump at the inlet of the mop is operating.
· This is normal.

The mop pads were improperly attached on the plates.
· Align and attach the centre of the mop pad with the centre of the mop attachment plate.

Memo

Memo

References

• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>