Aqara CL-L02D Ceiling Light User Manual

June 21, 2024
Aqara

Aqara CL-L02D Ceiling Light User Manual
Aqara CL-L02D Ceiling Light

Product Introduction

The Aqara Smart Ceiling Light redefines everyday illumination, seamlessly blending high-quality white light and a colorful gradient ring into your lifestyle. Its low idle consumption and compatibility with home automation systems position this light as a future-proof addition to any space, designed for longevity and to enhance your everyday living.

Product Introduction

Device Binding & Initialization

  1. Before activating the accessory, please make sure you have the Aqara Home downloaded and Aqara hub installed. Please open the app,”tap Home”and then tap”+”in the top right corner to enter”Add Device (Accessory)”page.
  2. Select”Ceiling Light T1M”, and add it according to instructions.
  3. Please visit www.aqara.com/support for more details.
  • If the connection fails, please move the accessory closer to the Hub and try again.

Effective Distance Verification after Device Binding: Locate the power switch, and toggle the switch on and off for 3 consecutive times. When the hub gives the sound prompt, the effective communication has been established between the device and the hub.

Product Specifications

Ceiling Light T1M
Model: CL-L02D
Dimensions: φ 495 × 75 mm (φ 19.49 × 2.95 in.)
Wireless Protocols: Zigbee
Rated Parameters: 100 – 240 V~, 50/60 Hz, Max. 0.4 A, 40 W
Color Temperature: 2700K ~ 6500K
Operating Temperature: – 10°C ~ 40°C (14°F ~ 104°F)
Operating Humidity: 0 ~ 95% RH, no condensation
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power ≤ 13 dBm

What is in the Box: Cover × 1, Base Plate × 1, Mounting Bracket × 1, Self- Tapping Screw × 3, Flat-Head Screw × 2, Plastic Anchor × 3, Metal Washer × 3, Plastic Washer × 3, User Manual × 1

For details, please see www.aqara.com/support or scan the QR code below to get the detailed electronic manual.

QR Code

Warnings:

In order to prevent accidents that may threaten personal safety, such as the ceiling light’s breakage, falling, electric shock, and firing, please install and use the device in strict accordance with the User Manual. Please do not modify the light or replace its components or accessories by yourself.

  1. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person;
  2. Do not install the device in environments that are wet, flammable, explosive,or exposed to high temperatures, high humidity, or direct sunlight. Ensure proper ventilation in the installation area.The device shall not be installed in water or inflammable, explosive, high-temperature or high-humidity environment or a location directly exposed to the sunlight. The installation environment must be ventilated properly;
  3. During the installation and use, take care not to damage the structure of the product. Do not beat or strike it with a heavy object, nor bind the strip with metal wires tightly. Otherwise, the wires may be embedded in the Strip and cause a short-circuit fault, burning the Strip;
  4. During the operation of the Strip, do not wrap or cover it with any object;
  5. Do not install the light on thin, soft or other types of ceilings that cannot bear the load, such as plasterboards, plastic plates, and thin metal sheets.
  6. The mountingpoint on the ceiling should support at least 4 times the weight of the ceiling light.
  7. Avoid contact with any acidic, alkaline, or other chemicals;
  8. During normal use, maintain a separation distance of at least 20 cm between the antenna and the body of the user.
  9. Please consult electrical professionals to install, check and repair the ceiling light.
  • If the light does not work after powering on, check the installation and wiring.

EU Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Ceiling Light T1M, CL-L02D] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/

UK Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Ceiling Light T1M, CL-L02D] is in compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696).
The full text of the UK declaration of conformity is available at the following internet address: http://www.aqara.com/DoC/.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals