WCPAA-1T AutoSky lite AI Box User Manual
- June 1, 2024
- AutoSky
Table of Contents
Wireless USB Adapter
The keys to wireless
User manual
Product function introduction
Your Auto Sky lite AI Box is designed to convert wired built-in CarPlay to wireless Carplay or Android Auto.
Compatible vehicles & devices
Most vehicles with built-in CarPlay.
Iphone 6 and later models, smartphones with Android 11 or newer with 5GHz Wi- Fi Frequency Band; Google: Pixel /XL, Pixel 2/2 XL, Pixel 3/3 XL/3a/3a XL, Pixel 4/4 XL/4a, Pixel 5, Pixel 6/6 Pro, Nexus 5X, Nexus 6P; and Samsung: Galaxy S8/S8+, S9/S9+, S20/S20+/S20 Ultra, S21/S21+/S21 Ultra.
General instructions
Plug the device into the vehicle’s USB port usually marked with CarPlay or smartphone icon, if you are using iPhone, select “Use CarPlay on the pop-up, you will be redirected to the following interface:
Home interface
How to use Wireless Android Auto or CarPlay
Note for Android users:
Before using Android Auto, please make sure you have the latest Android Auto
App installed and enable “Wireless Android Auto” in Android Auto settings.
- On your Home interface tap “Android Auto” or “CarPlay” it will show you the name and password of your Auto Sky lite AI Box.
- Search on your smartphone’s or iPhone’s Bluetooth for your AI box and enter the given password.
WiFi Connectivity
In order to use some of your Auto Sky lite AI Box features such as Netflix or Youtube, you will need to set up a wifi network.
- Tap on settings on your Home interface and enter the WiFi menu.
- Select the WiFi network you will use and enter the password.
SD Media Playback
Your new Auto Sky lite AI Box has a SD card port located at the bottom.
SD Card Slot
• Insert an SD card at the bottom of your Auto Sky lite AI Box.
• Select Music or File browser on your Home interface to access
your media.
Troubleshooting your USB Adapter?
Scan this QR code in order to help you.
Model: WCPAA-1T
FCC: 2A6P9-WCPAA-1T
customerservice@promasterelectronic.com
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.