AutoSky WUA1 Wireless USB Adapter User Manual

June 5, 2024
AutoSky

The key to wireless
User manual

Version update description

After connecting to wireless CarPlay, scan this QR code with your camera or enter 192.168.2.1 in the safari to enter the following interface.

http://192.168.2.1

Note: You need an iPhone and open the mobile data function to access the browser.

Troubleshooting your USB Adapter?

Scan this QR code in order to help you.

AutoSky WUA1 Wireless USB Adapter - qr code

https://promasterelectronic.com/en/troubleshooting.html

Product function introduction

Wireless transmission brings a more convenient connection experience and greatly enhances the owner’s experience of using Car Play.

Product specification parameters

Power input: 5V 1-2.1A
Product Power: 0.15W
Output Resolution: Adaptative
Compatible car models and iPhone devices
Search for the compatible models: https://www.apple.com/ios/carplay /available-models/ Support iPhone 6 and later models, software version iOS 10 or above.

Product connection

If the factory car supports a CarPlay connection via USB cable, please plug the product into the USB port in the car. Such USB ports may be marked with a CarPlay car icon or a smartphone icon. Select the CarPlay function in the care system, it will enter the following interface. Make sure your phone’s Bluetooth and Wi-fi features are turned on and no other in-car devices are connected. On your iPhone, go to “Settings” > “Bluetooth”, in the Other Devices list, you will see a Bluetooth device name starting with CarPlayBox, tap to pair, allow permission, and tap Use CarPaly to Connect wirelessly.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals