VIVOSUN 10x 20.75 Seedling Heat Mat Instruction Manual

VIVOSUN 10x 20.75 Seedling Heat Mat

Product Information

Specifications

• Size: 10”W x 20.75”L
• Voltage: 120V – AC
• Wattage: 20 Watts
• Temperature Set: Insulation Resistance 100M500Vdc
• Service Life: 30000H

Product Usage Instructions

General Use Instructions

1. Place the mat on a well-drained surface (without standing water).
2. For warmer mat temperatures, place it on an insulated surface rather than a cold floor.
3. Cover your plant tray with a humidity cover or dome to keep the root area warmer and maintain humidity.

Attention – Please Carefully Read Before First Use
This Heat Mat does not include a temperature controller. Once plugged in, the Heat Mat is always on and produces a constant 20 watts. Perfect for gently heating the soil’s root zone to optimal seed germination temperatures.

Use Instructions as Fermentation Heater

1. Check the optimal temperature for your intended use.
2. If the product gets too warm, use spacers like popsicle sticks or wooden pencils to increase the distance from the heater to the container or consider using a Heat Mat Temperature Controller (sold separately).
3. Never wrap the Heat Mat with insulating materials as it may cause the product to overheat.

Danger Warnings:

• This appliance has a polarized plug (one blade is wider than the other).
• To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
• If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• DO NOT modify the plug in any way.
• DO NOT immerse in water.
• For indoor use only.

FAQ

• Q: Can I use this heat mat outdoors?
  A: No, this heat mat is designed for indoor use only.

• Q: What is the optimal temperature for seed germination using this heat mat?
  A: The optimal temperature may vary depending on the seeds you are germinating, but generally, temperatures between 70-85°F are ideal.

• Q: Can I stack multiple trays on top of each other with this heat mat?
  A: It is not recommended to stack trays directly on top of each other with the heat mat as it may obstruct heat distribution. It’s better to place the heat mat under each tray separately.

GENERAL USE INSTRUCTIONS

1. Place the mat on a well-drained surface (without standing water).
2. For warmer mat temperatures, place it on an insulated surface rather than a cold floor.
3. Covering your plant tray with a humidity cover or dome will also keep root area warmer, and maintain humidity control for better rooting.
4. Only plug the Heat Mat into a 120V grounded outlet.
5. Raise rooting area temperatures approximately 10-20°F /5-11°C above ambient air temperature.

ATTENTION- PLEASE CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE FIRST USE
This Heat Mat DOES NOT INCLUDE a temperature controller. Once plugged in, the Heat Mat is always on and produces a constant 20 watts. Perfect for gently heating soil’s root zone to optimal seed germination temperatures.

USE INSTRUCTIONS AS FERMENTATION HEATER

1. Be sure to check the optimal temperature for your intended use. If the product gets too warm, we recommend using spacers like popsicle sticks or wooden pencils to increase the distance from the heater to the container, or to use a Heat Mat Temperature Controller (sold separately).
   Never wrap the Heat Mat with insulating materials as this may cause the product to overheat.

DANGER WARNINGS

1. This appliance has a polarized plug (one blade is wider than the other).
2. To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
3. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
4. DO NOT modify the plug in any way.
5. DO NOT immerse in water.
6. For indoor use only.

SPECIFICATIONS

• Size 10’’W x 20.75’’L
• Voltage 120V – AC
• Wattage 20 Watts
• Temperature Set 0-40°C (32-104°F)
• Insulation Resistance 100M 500Vdc
• Service Life 30000H

Maximum working temperature of the mat can be around 35 degrees Celsius above room temperature, but never exceeds 40°C ( 104° F ).
When the room temperature is around 20°C ( 68° F ), the heat mat should be detached from the ground and plugged in for 30 mins before it reaches the operating temperature.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>