Chug ASWC91 3 in 1 Compact Wireless Charger User Manual

Chug ASWC913 in 1 Compact Wireless Charger

Charge your phone, watch, and earbuds anywhere with this compact powerful charger.

STAND UNFOLDED

QUICK TIPS

• Double check your alignment – be sure to center the device on the charging surface to ensure the most efficient and fastest charge times.
• Certain materials and thicker phone cases can interfere with wireless charging.
• Not all devices are compatible with magnetic or wireless charging, please check the devices user manual for compatibility information.
• This is a high speed 3-in-1 charger, please use the USB-C cable and power delivery wall plug that was included; using different items may cause slower charging.

WHATS INCLUDED

• 3-IN-1 Wireless Charger
• USB-C to USB-C Charging Cable
• Power Delivery Wall Plug

LED INDICATOR GUIDE

Solid Red – Charging your device.
Solid White – Fully charged.
Flashing Red – Foreign object detection, metal or other materials that may cause overheating and damage the charger, or the device your charging, remove them immediately.

HOW TO CHARGE

• Unfold the 3-in-1 charger and place int on a fiat, sturdy surface.

• Plug the wall plug into an outlet, and the USB-C cable into both the wall plug and 3-in-1 charger. If you need to use a different power source be sure itis a USB power supplyofDC9V 3A minimum.
  warning: please use a UL compliant power supply.

• Place your device on the correct charging surface making sure the device is centered on the charging surface or the device will not charge.
  note: The magnetic phone charging stand will charge all Qi-enabled devices. Remove anything with a magnetic strip, like credit cards, to prevent damage before charging.

• The magnetic phone charging stand allows for wireless charging up to 10W; the watch charging stand and earbud case charger allow for wireless charging up to SW.

• Remove the phone from the phone charging stand before changing the orientation of the phone.

• Charge time will vary by device.

TROUBLESHOOTING

• Double check the connections between the USB-C cable and wall plug, ensuring they are fully plugged in.
• Some phone cases may cause interference with wireless charging; remove the case for best results.
• Make sure the device is centered on the wireless charger.
• Magnetic wireless charging is compatible with newer devices as well as other Qi-enabled devices; consult your devices user guide to ensure compatibility.
• When using the earbud case charging base the device may still charge even when not fully centered, if the indicator light is red the device is being charged.
• If the indicator light flashes red while switching the phone orientation on the magnetic phone charging stand, remove the phone and recenter it in the preferred position.

SAFETY

• Do not use in high temperatures or extreme weather.
• Do not use chemical detergents to clean your device, use a soft dry cloth.
• Immediately unplug it from its power source if it gets wet.
• Keep the charger away from heat and direct sunlight.
• Remove credit cards and other cards with magnetic strips to prevent damage to the cards.

SAVE THESE INSTRUCTIONS

FCC ID : 2A023-ASWC 91 Model: ASWC 91 Input: 5.0V=3.0A/ 9.0V=3.0A Phone Charging Stand Output t0W Max Watch Charging Stand Output: 25W Max Earbud Case Charging Base Output SW Ma;,; Made In Vietnam This device complies with part 15 of the FCC Rules. Operatlon is subject to the following two conditlons: 1) This device may not cause harmful Interference. and 2) this device must accept any interference received. Including Interference that mi:ly cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compllance could void the user’s authority to operate the equlpmenL

NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications,

However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception.
which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorlentor relocate the receMng antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected
• Consult the dealer or an experienced radio/TY technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20Cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

8725 COLUMBINE RD EDEN PRAIRIE, MN 55.344-6695, PO Box# 44895 Distributed by zsou.

For qualified repair specialists requesting repair infurmation and parts please contact the original manufacturer at support®zsoupower.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>