anko SLR-23057 LED Cloud Message Board Instructions
- June 21, 2024
- Anko
Table of Contents
anko SLR-23057 LED Cloud Message Board
Product Information
Specifications:
- Model: SLR-23057
- Product Name: LED CLOUD MESSAGE BOARD
- Operating Instructions: Included
- Power Source: USB plug or alternative power source
- Number of Programs: 29
- Remote Control: Requires 3*1.5V AAA batteries (not included)
Product Usage Instructions
Assembly:
- Display the LED neon sign in the desired location (hanging holes distance is 14cm).
- Insert the USB plug into the USB socket or an alternative power source. Pay attention to the electrical parameters of the power source as required.
Turning On and Selecting Modes:
- Tap and hold the blue button on the USB plug for 1 second to switch on the light.
- There are 29 programs for this lamp. Click the blue button to select the mode you prefer.
- To turn off the light, tap and hold the blue button on the USB plug for 1 second.
Using the Remote Control:
- You can also use the remote control to select modes and colors you like.
- The remote control requires 3*1.5V AAA batteries (not included) to operate.
Frequently Asked Questions
- Q: Can children use this product?
- A: This product has not been designed for use by children. Children should be closely supervised when near any electrical appliance.
- Q: What should I do if the luminaire stops unexpectedly or malfunctions?
- A: Plug off the USB plug immediately and seek professional advice to rectify the fault or make repairs.
- Q: How many programs are available for this lamp?
- A: There are a total of 29 programs available for this lamp.
IMPORTANT SAFETY INSTRUCTIONS
The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is\ important to read all of these instructions carefully before using the product, and to save them for future reference or new users.
- This product must only be used as intended in accordance with the enclosed operating instructions.
- If the external flexible cable or cord of this luminaire is damaged, this product should be discarded
- If the luminaire stops unexpectedly or appears to malfunction, plug off the USB plug and stop using immediately. Seek professional advice to rectify the fault or make repairs.
- Plug off the USB plug when not in use, before cleaning or changing accessories.
- Keep the luminaire and cable away from sources of heat, sharp objects or anything that may cause damage.
- Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
- This product has not been designed for use by children. Children should be closely supervised at all times when they are near any electrical appliance.
- To protect against electric shock, never allow the luminaire come into contact with water or any other liquid.
- Never reach this luminaire that has fallen into water. Do not re-use until the product has been inspected and approved by a qualified electrician.
- Do not use outdoors. This luminaire has been designed for domestic indoor use only.
- Use only a microfiber and dry cloth for cleaning the product.
- Operate carefully to not cause any damage by dropping or physical shocking it.
- Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING
- Although products do not generate a great amount of heat, it is recommended that you do not cover or conceal it.
- Do not use the product if outer PVC jacket is damaged, loose connections, or if the wire is visible without insulation.
- Do not operate/run LED flex neon in temperatures exceeding 115F (45 ℃)
- Do no operate LED flex neon over the specified voltage or LED life degradation will be greatly increased.
- Ensure secure attachment to wall. Consult a DIY expert if required.
Product specification
- USB input: 5V DC 2000mA
- 3*1.5V AAA batteries required for the remote control (batteries not included)
- Bulb rating: LED Max 8W
INSTRUCTIONS FOR ASSEMBLY
- Display the LED neon sign in the desired location (hanging hole distance is 14cm).
- Insert the USB plug into the USB socket or alternative power source. Please attention to the electrical parameters of the power source as a requirement.
- Tap and hold the blue button 1 second on the USB plug to switch on the light.
- There are 29 programs for this lamp. Please click the blue button to select the mode which you like.
- Tap and hold the blue button 1 second again will turn off the light.
- Also you can use remote control to select the modes and colours you like. The remote control needs 3*1.5V AAA batteries (not included) to operate.
- K: 43351558
- T: 68734725
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>