MISHIMOTO MMLP-BR-22C Capable Bumper License Plate Relocation Kit Installation Guide
- June 21, 2024
- MISHIMOTO
Table of Contents
INSTALLATION GUIDE
Capable Bumper License Plate Relocation Kit
Fits 2022+ Ford Bronco
SKU: MMLP–BR–22C
RESOURCES & CONTACT
| CALL 1-877-GOMISHI
CUSTOMER SERVICE HOURS: MON–FRI 8:30AM–5:00PM EST
---|---
| MISHIMOTO
| GOMISHIMOTO
| MISHIMOTO
| WEBSITE
WWW.MISHIMOTO.COM
| ENGINEERING BLOG
WWW.MISHIMOTO.COM/ENGINEERING
FITS 2022+ FORD BRONCO CAPABLE
BUMPER LICENSE PLATE RELOCATION KIT
EXPLODED VIEW & DISCLAIMER
DISCLAIMER
› This license plate has a wide range of adjustability for maximum
compatibility with a variety of accessories. Some positions may interfere with
parking sensors in the front bumper, please be aware of this before operating
the vehicle
PARTS BREAKDOWN
| PART NUMBER | DESCRIPTION | QTY |
|---|---|---|
| MM1048–01 | BRACKET 1 | 1 |
| MM10001–02 | BRACKET 2 | 1 |
| BF6X1.0–16 | M6 BOLT | 4 |
| BF8X1.25–16B | M8 BOLT | 2 |
IMPORTANT SAFETY INFORMATION & INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
› Mishimoto recommends you use safety glasses and protective gloves during the
installation of our products
› Raise vehicle only on jack stands or on a vehicle lift
› Allow vehicle to cool completely prior to attempting installatio
› Do not run the engine or drive the vehicle while overheating; serious damage
can occur
› Please dispose of any liquids properly
› Mishimoto is not responsible for any vehicle damage or personal injury due
to installation errors, misuse, or removal of Mishimoto products
› If you need any assistance while installing our products, reach out to our
Customer Service Team at 1-877-GOMISHI
REQUIRED TOOLS
| 3/8” DRIVE RATCHET AND | LEVEL |
|---|---|
| EXTENSION | FILE |
| 15MM SOCKET | SANDPAPER |
| 3/8” DRIVE TORQUE WRENCH | MASKING TAPE |
| 4MM ALLEN WRENCH | MARKER |
| 5MM ALLEN WRENCH |
INSTALL TIME: 45 MINUTES
INSTALL DIFFICULTY:
INSTALLATION INSTRUCTIONS
- Remove the passenger-side front bumper trim panel by pulling outward to release it from the bumper.
- Remove the outermost 15mm bolt from the front bumper.
- Fasten the MM10048-01 bracket to front bumper using the 15mm bolt removed in the previous step. Push the bracket upwards so that it fits tightly against the bumper. Torque the bolt to 81 lb/ft. (Image on top right)
- Reinstall the front bumper trim panel. Apply a strip of masking tape to the upper face of the trim panel as shown in the image above. Using a marker, add marks to the tape to indicate the location of the bracket on the trim panel.
- Remove the trim panel from the bumper and transfer the markings to the back side as shown. Using a file and sandpaper, trim the marked area.
- After trimming, the trim panel should resemble what is shown in the below images.
- Reinstall the trim panel.
- Fasten MM10001-02 to MM10048-01 in the desired orientation using the provided M8 bolts. A level should be used to ensure a nice, clean installation.
- Fasten the front license plate to MM10001-02 with the provided M6 bolts.
Congratulations! You have finished your installation.
DISPOSAL INSTRUCTIONS & WARRANTY INFORMATION
DISPOSAL INSTRUCTIONS
› Do not dispose of any product as unsorted municipal waste.
Use separate collection facilities. Contact your local authority for
information regarding the collection systems available.
› Never improperly dispose of any coolant, oil, or other chemicals.
WARRANTY INFORMATION
› All claims must be accompanied with a picture of the Mishimoto product
showing the issue for which the claim is being submitted.
› Mishimoto asks that the customer inspect their purchased item for any damage
immediately upon arrival.
› Any product deemed dead on arrival (DOA) must be claimed within 14 business
days of delivery. Claims outside of this time frame will not be covered under
the Mishimoto Lifetime Warranty.
› This warranty does not include payment and/or reimbursement of the cost of
labor in connection with the removal of any product returned pursuant to the
warranty policy or in connection with the installation of any replacement
items provided under the warranty policy.
› Mishimoto has the right to refuse a claim at any time.
› When Mishimoto accepts a claim, Mishimoto retains full discretion to choose
if it will: (i) repair or replace purchaser’s original Mishimoto product; (ii)
replace purchaser’s original Mishimoto product with the most current available
model; or (iii) provide the purchaser with a gift card redeemable on
Mishimoto.com in the amount of the original purchase
price of the original Mishimoto product. The provision of a replacement of a
Mishimoto product is subject to availability and Mishimoto retains the right
to substitute any warranty claim item with a comparable item or credit at any
time.
› If Mishimoto determines that it will provide a replacement item in
connection with a claim under this warranty policy, and such item is out of
stock, Mishimoto will place the customer on backorder and ship the replacement
product to the purchaser once it becomes available.
› Mishimoto is not liable for incorrect shipments in connection with a claim
if a claim form is completed incorrectly, or if a model number is not included
in a claim.
› If you have a vehicle equipped with an automatic transmission, please make
sure to specify this within the text box on the claim form. Mishimoto is not
responsible for incorrect replacement shipments if transmission type is not
indicated.
WARNING
Cancer and Reproductive Harm
www.Pé65Warnings.ca.gov
This product can expose you to chemicals which are known to the state of California to cause cancer. For more information visit: www.p65warnings.ca.gov
Installation Guide
| SKU: MMLP–BR–22C
| Fits 2022+ Ford Bronco Capable Bumper
License Plate Relocation Kit
MISHIMOTO 7 BOULDEN CIRCLE,
NEW CASTLE, DE 19720 P 1.877.GOMISHI
WWW.MISHIMOTO.COM