Woodpeckers 20133IX3 3-Flute Carbide Insert Spoilboard Bits Instructions
- June 21, 2024
- Woodpeckers
Table of Contents
Woodpeckers®
1″ DIA. 3-FLUTE CARBIDE INSERT SPOILBOARD BITS
Recommended Maximum Speed: 30,000rpm
A: WARNING! BLADE IS SHARP!
When fresh cutting edges are needed, loosen hex screw with supplied 1/16″ hex wrench.
Rotate the blades to a sharp edge.
Then press the blade against the seat with the edge of the blade in the groove and re-tighten.
Countersunk Square Carbide Insert .40″ Square 3-Pack 20133IX3 Available atWoodpeck.com
If you think you’re missing anything, email us
atmailroom@woodpeck.com.
You can also call us at800-752-0725
from 9:00 a.m. to 4:00 p.m. EST Monday – Friday.
Woodpeckers®
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers, LLC
WARNING! To reduce the risk of injury keep hands away from moving parts. Refer to your owners manual for proper setup and use.
WARNING! To reduce the risk of injury, wear safety goggles or glasses with side shields, ear protection & a dust mask.
WARNING!
This product can expose you to chemicals, including chromium, which is known
to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov
www.woodpeck.com
At Woodpeckers we are constantly reviewing & improving our tools. The most
current version of our instruction manuals are always available to download at
woodpeck.com. (Located in the bottom section of the tools page under the
“Additional Information” or “Instructions ” tabs.)
Be the first to know all the new products, OneTIME Tools & sales by subscribing to our eClub. (Located at the top center of our webpage woodpeck.com.)
Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
Interact with us! Follow us on Facebook, Instagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking Resource Center/Blog. (Located at the bottom center of our webpage woodpeck.com)
REV112023
Documents / Resources
|
Woodpeckers 20133IX3 3-Flute Carbide Insert Spoilboard
Bits
[pdf] Instructions
20133IX3 3-Flute Carbide Insert Spoilboard Bits, 20133IX3, 3-Flute Carbide
Insert Spoilboard Bits, Carbide Insert Spoilboard Bits, Insert Spoilboard
Bits, Spoilboard Bits, Bits
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>