PHOENIX CONTACT 2700459 Analog Module Instructions
- June 21, 2024
- PHOENIX CONTACT
Table of Contents
- PHOENIX CONTACT 2700459 Analog Module
- Technical data
- System properties
- Input data
- Electrical properties
- Connection data
- Environmental and real-life conditions
- Standards and regulations
- Drawings
- Approvals
- Classifications
- Environmental product compliance
- Accessories
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PHOENIX CONTACT 2700459 Analog Module
Product Information
Specifications
- Analog inputs: 4
- Input voltage range: 0 V to 10 V, -10 V to 10 V
- Connection technology: 2-conductor
- Transmission speed in the local bus: 500 kbps
- Degree of protection: IP20
- Included: Inline connector and labeling field
Product Usage Instructions
Installation
- Ensure the power is off before installation.
- Connect the analog module to the appropriate bus system using the provided Inline connector.
- Securely mount the module in a suitable location with proper ventilation.
Configuration
- Refer to the user documentation for detailed configuration procedures.
- Set the input voltage range according to your specific requirements.
Operation
- Apply the input voltage signals within the specified range.
- Monitor the measured values through the designated output address area.
- Ensure proper electrical isolation to avoid potential issues.
FAQ
Q: What is the maximum power dissipation for the nominal condition?
A: The maximum power dissipation for the nominal condition is 7.68 W.
IB IL AI 4/U-PAC – Analog module
2700459
https://www.phoenixcontact.com/us/products/2700459
Please be informed that the data shown in this PDF document is generated from
our online catalog. Please find the complete data in the user documentation.
Our general terms of use for downloads are valid.
Inline, Analog input terminal, Analog inputs: 4, 0 V … 10 V, -10 V … 10 V, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
Your advantages
- 4 analog, bipolar input channels for the connection of voltage signals
- Connection of sensors in 2-conductor technology
- Voltage ranges: 0 V … 10 V, ±10 V
- Mean-value generation of the inputs
- Process data update of all channels in 250 µs
- Diagnostic and status indicators
Commercial data
| Item number | 2700459 |
|---|---|
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Sales key | DR01 |
| Product key | DRI141 |
| Catalog page | Page 135 (C-6-2019) |
| GTIN | 4046356566537 |
| Weight per piece (including packing) | 90 g |
| Weight per piece (excluding packing) | 88 g |
| Customs tariff number | 85389091 |
| Country of origin | DE |
Technical data
Dimensions
Interfaces
| Connection method | Inline data jumper |
|---|---|
| Transmission speed | 500 kbps |
| Transmission physics | Copper |
System properties
Module
| ID code (dec.) | 127 |
|---|---|
| ID code (hex) | 7F |
| Length code (hex) | 04 |
| Length code (dec) | 04 |
| Process data channel | 64 bit |
| Input address area | 8 Byte |
| Output address area | 8 Byte |
| Register length | 64 bit |
| Required parameter data | 10 Byte |
| Required configuration data | 5 Byte |
Input data
Analog
| Input name | Analog inputs |
|---|---|
| Description of the input | Differential inputs, voltage |
| Number of inputs | 4 |
| A/D conversion time | max. 6.5 µs |
| A/D converter resolution | 12 bit |
| Connection method | Inline connector |
| Connection technology | 2-conductor |
| --- | --- |
| Voltage input signal | 0 V … 10 V |
-10 V … 10 V
Input resistance of voltage input| typ. 324 kΩ
Data formats| IB IL, S7-compatible
Filtering| None or mean-value generation over 4, 16, or 32 measured values
Limit frequency (3 dB)| 300 Hz
Common mode voltage range signal – ground| max. 50 V
Measured value resolution| 12 bits (11 bits + sign bit)
Measured value representation| 12 bits (11 bits + sign bit)
Protective circuit| Overload protection; ±30 V DC, maximum
Product properties
| Type | modular |
|---|---|
| Product type | I/O component |
| Product family | Inline |
| Scope of delivery | including Inline connector and labeling field |
| Diagnostics messages | Failure of the internal I/O supply I/O error message |
sent to the bus coupler
I/O supply failure Message in the diagnostic code (in the IB IL format)
Overrange or underrange Message in the diagnostic code (in the IB IL format)
Configuration invalid Message in the diagnostic code (in the IB IL format)
Electrical properties
logics)|
---|---
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O| 500 V AC, 50
Hz, 1 min.
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / functional ground|
500 V AC, 50 Hz, 1 min.
Test voltage: I/O/functional ground| 500 V AC, 50 Hz, 1 min.
Connection data
Environmental and real-life conditions
Ambient conditions
| Ambient temperature (operation) | -25 °C … 55 °C |
|---|---|
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa … 106 kPa (up to 3000 m above sea |
level)
Ambient temperature (storage/transport)| -25 °C … 85 °C
Permissible humidity (operation)| 10 % … 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)| 10 % … 95 % (according to DIN EN
61131-2)
Standards and regulations
Drawings
Approvals
To download certificates, visit the product detail page:
https://www.phoenixcontact.com/us/products/2700459 
Classifications
Environmental product compliance
Accessories
SK 8 – Shield connection clamp
3025163
https://www.phoenixcontact.com/us/products/3025163
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
SK 14 – Shield connection clamp
3025176
https://www.phoenixcontact.com/us/products/3025176
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
SK 20 – Shield connection clamp
3025189
https://www.phoenixcontact.com/us/products/3025189
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
SK 35 – Shield connection clamp
3026463
https://www.phoenixcontact.com/us/products/3026463
Shield connection clamp, for shield on busbars, contact resistance < 1 mΩ
AB-SK – Support bracket
3025341
https://www.phoenixcontact.com/us/products/3025341
Support bracket for busbars
AB-SK 65 – Support bracket
3026489
https://www.phoenixcontact.com/us/products/3026489
Support bracket, Bracket for busbars, set every 20 cm, width: 6.2 mm, height:
95.5 mm, number of positions: 1, color: gray, mounting type: DIN rail mounting
AB-SK/E – Support bracket
3026476
https://www.phoenixcontact.com/us/products/3026476
Support bracket, Bracket for busbars, set every 20 cm, width: 56 mm, height:
10mm, diameter: 4.5 mm, number of positions: 2, color: silver, mounting type:
Direct mounting
NLS-CU 3/10 SN 1000MM – Neutral busbar
0402174
https://www.phoenixcontact.com/us/products/0402174
Neutral busbar, DIN VDE 0611-4: 1991-02, material: Copper, tin-plated, color:
silver
AK 4 – Connection terminal block
0404017
https://www.phoenixcontact.com/us/products/0404017
Connection terminal block, connection method: Screw connection, Rated cross
section: 4 mm2, cross section: 0.5 mm2 – 6 mm2, mounting: Neutral busbar,
color: silver
AKG 4 GNYE – Connection terminal block
0421029
https://www.phoenixcontact.com/us/products/0421029
Connection terminal block, nom. voltage: 300 V, nominal current: 41 A,
connection method: Screw connection, Rated cross section: 4 mm2, cross
section: 0.5 mm2 – 6 mm2, mounting: Neutral busbar, color: green-yellow
AKG 4 BK – Connection terminal block
0421032
https://www.phoenixcontact.com/us/products/0421032
Connection terminal block, nom. voltage: 300 V, nominal current: 41 A,
connection method: Screw connection, Rated cross section: 4 mm2, cross
section: 0.5 mm2 – 6 mm2, mounting: Neutral busbar, color: black
IB IL SCN-8 – Inline connector
2726337
https://www.phoenixcontact.com/us/products/2726337
Connector, for digital 1, 2 or 8-channel Inline terminals
IB IL FIELD 2 – Marking field
2727501
https://www.phoenixcontact.com/us/products/2727501
Marking field, width: 12.2 mm
ESL 62X10
ESL 62X10 – Insert strip
0809492
https://www.phoenixcontact.com/us/products/0809492
Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing
systems, CMS-P1-PLOTTER, mounting type: insert, lettering field size: 62 x 10
mm, Number of individual labels: 72
Phoenix Contact 2023 © – all rights reserved https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Downloaded from Arrow.com
References
- Phoenix Contact United Kingdom
- NLS-CU 3/10 SN 1000MM - Neutral busbar - 0402174 | Phoenix Contact
- IB IL AI 4/U-PAC - Analog module - 2700459 | Phoenix Contact
- SK 8 - Shield connection clamp - 3025163 | Phoenix Contact
- SK 35 - Shield connection clamp - 3026463 | Phoenix Contact
- AB-SK/E - Support bracket - 3026476 | Phoenix Contact
- AB-SK 65 - Support bracket - 3026489 | Phoenix Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>