ZEBRA MC93 Charge Only Cup Conversion Instruction Manual
- June 20, 2024
- ZEBRA
Table of Contents
ZEBRA MC93 Charge Only Cup Conversion
Specifications
- Product Model : MC93
- Conversion Type: Charge Only Cup
- Installation Manual: MN-004756-01EN-P
Product Usage Instructions
Cup Removal
- Disconnect the AC power from the cradle.
- Using a Phillips screwdriver, remove the screw securing the charge-only cup to the cradle.
- Slide the charge-only cup forward and lift it to remove.
- Disconnect the charge-only cup cable from the connector.
Cup Installation
- Connect the new charge-only cup cable to the connector.
- Align the new charge-only cup with the cradle and slide it into place.
- Secure the new charge-only cup to the cradle using a Phillips screwdriver.
Support and Information
Contact Zebra for support and information:
- Contact Zebra
- View Quick Answers and Knowledge Base
- Learn about product patent information
- Join Community Connection of Zebra users and ambassadors
Cup removal
CAUTION-ESD: This rework activity must be performed by a qualified technician or engineer in an ESD-safe workstation. The technician or engineer must wear a grounded ESD strap.
- Remove the AC power from the cradle.
- Remove the screw securing the charge-only cup to the cradle using a Phillips screwdriver.
- Slide the charge-only cup forward and lift.
- Disconnect the charge only cup cable from the connector.
- Connect the new charge-only cup cable to the connector.
- Align the new charge-only cup with the cradle and slide the ethernet cup backConnect the new charge only cup cable to the connector.
- Using a Phillips screwdriver, secure the new charge-only cup to cradle with a screw.
Support and Information
MORE INFORTMATIOJN
Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA
zebra.com
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies
Corp., registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners.
© 2023 Zebra Technologies Corp. and/or its affiliates. All rights reserved.
FAQ
- Q: Who should perform the cup conversion?
- A: The cup conversion should be performed by a qualified technician or engineer in an ESD-safe workstation wearing a grounded ESD strap.
Read User Manual Online (PDF format)
Loading......