Hotpoint AH12H15D5B PTAC Heat Pump Unit with Electric Heat Backup 30 amps Instruction Manual
- June 16, 2024
- Hotpoint
Table of Contents
AH12H15D5B
Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 30 amps, 230/208 Volt
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ELECTRICAL WIRING
- All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified electrician.
GRILLE OPTIONS
- Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
- 230/208 volt units must be plugged into a receptacle. Installation mustcomply with local electrical codes and regulations.
- Power cord is permanently attached on all Hotpoint chassis.
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with
insulation, for quick self-assembly.
A – 42”, B – 13-3/4”, C – 16”| WALL OPENING DIMENSIONS
Add 1/4” to A and C dimensions for all
cut-outs.
RAB80 16-1/4” Min. H x 42-1/4” Min. W
AH12 ELECTRIC HEATER
230/208 VOLT| LINE CORD CONNECTED UNITS
Heater Watts| 5,000 / 4,100
Heater BTU| 15,000 / 12,200
Heater Amps| 22.3 / 20.1
Min Circuit| 30
Recommended protective Device| 30 amp time-delay fuse or breaker
AH12 HEAT PUMP
Heat Pump Watts| 1180 / 1120
Heat Pump BTU| 13,400 / 13,100
COP| 3.2
AH12H15D5B
Hotpoi ® PTAC Heat Pump Unit with Electric Heat Backup 30 amps, 230/208 Volt
FEATURE AND BENEFITS
- 14,800 / 14,600 cooling BTU
- 10.6 EER
- 13,400 / 13,100 heating BTU
- 3.2 COP
- R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
- 3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
- 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
- Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
- Power Cord (LCDI) Included – Hotpoint PTACs come witheverything needed for a quick and easy installation
- Automatic Emergency Heat – Keep guests comfortable witha heating option that uses electric resistance heat in heat pumpmode
- Freeze and Frost Protection – Automatic freeze and indoor frostcontrol keep units operating in peak condition
- Auto Power Recovery – In case of power failures, units
- tomatically resume their operation when power restores, reducing maintenance calls
- Self Diagnostics – Quickly and easily identify service needs with
- nine-point diagnostic code system
- Backed by an Industry Leader – With a long history of creatingdurable products at an affordable price, Hotpoint is your trustedPTAC brand
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE
31-5000817 Rev. 0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>