ASUS A620 Plus Wi-Fi 6 Motherboards User Guide

: June 21, 2024
: Asus

Table of Contents

ASUS A620 Plus Wi-Fi 6 Motherboards
OVERVIEW
General Notices
Notices for Wi-Fi model
Simplified EU Declaration of Conformity
Warranty
ASUS contact information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS A620 Plus Wi-Fi 6 Motherboards

ASUS-A620-Plus-Wi-Fi-6-Motherboards-
PRODUCT

OVERVIEW

The items labeled below correspond to the installation steps, for steps 1,4,11,12, and for more information on the steps, please refer to the rest of the guide.

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-1

Prepare the components

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-3

Install key components

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-4

Install the cooling system

Air Cooler

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-7

AIO Cooler

Install the motherboard into the chassis

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-9

NOTE: Please refer to the manual(s) for more information:

Motherboard
Chassis

Connect to chassis fan and ARGB/RGB headers

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-10

Install and connect the power supply unit (PSU)

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-11

Connect cables from PSU

Connect the power cables to the motherboard

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-12

Connect everything to the motherboard

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-13

Connect cables from PSU

Install the graphics card

NOTE: Please note that power connection is required for selected models. Please refer to the manual(s) for more information

Motherboard
Chassis
Graphics Card

Connect to the Internet via Ethernet/Wi-Fi antenna

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-17

NOTE: Please refer to the manual(s) for more information: Motherboard

Connect peripherals (monitor, keyboard, mouse, etc.)

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-18

Turn on the PSU and your PC

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-19

NOTE: Please check the Q-LEDs or Q-LED Core on selected motherboards when powering on your PC for system status. If an error occurs, check if your CPU Fan header is properly connected; you can also scan the code or refer to the manual(s) for more information Motherboard.

Install the operating system and drivers

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-20

Driver and Utilities installation

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service technician or your retailer.
Your motherboard should only be used in environments with ambient temperatures between 10°C and 35°C.

Button/Coin Batteries Safety Information

Remove and immediately recycle or dispose of used batteries according to local regulations and keep out of reach of children. Do not incinerate or dispose of batteries in household trash.
If ingested or inserted inside any part of the body, call a local poison control center for treatment information. Even used batteries may cause serious injury or death.
This product uses CR2032 type batteries with a nominal voltage of 3V.
Do not attempt to recharge non-rechargeable batteries.
Do not forcibly discharge, recharge, disassemble, heat above the battery manufacturer’s specified temperature rating, or incinerate. Doing so may result in injury or chemical burns caused by venting, leakage, or explosion.
When installing batteries, ensure that the polarity (+ and -) is correct.
Do not mix old and new batteries, or batteries of different brands or types (such as alkaline, carbon-zinc, or rechargeable batteries).
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment cannot be securely closed, stop using the product, remove the batteries, and keep the batteries out of reach of children.

WARNING

INGESTION HAZARD: This product contains a button cell or coin battery.
DEATH or serious injury can occur if ingested.
A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
KEEP new and used batteries OUT OF REACH of CHILDREN.
Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

General Notices

FCC Compliance Information

Responsible Party: Asus Computer International
Address : 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No : (510)739-3777 / (510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

HDMI Trademark Notice
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Safety Precautions
Accessories that came with this product have been designed and verified for use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

Declaration of compliance for product environmental regulation
ASUS follows the green design concept to design and manufacture our products and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS discloses the relevant information based on regulation requirements. Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with:

EU REACH and Article 33
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products on the ASUS REACH website at http://csr.asus.com/english/REACH. htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/

Türkiye RoHS
AEEE Yönetmeliğine Uygundur

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

France sorting and recycling information

Points de collecte sur www.quefairedemesdechets.fr

Notices for Wi-Fi model

RF exposure warning
This equipment must be installed and operated under provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

FCC RF Caution Statement

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B)

Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of Conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for the country listed below:

UKCA RF Output table (The Radio Equipment Regulations 2017)

Model: RTL8851BE

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-21

Receiver category 1

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-22

Simplified EU Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/ The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below: ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-23

CE RED RF Output table (Directive 2014/53/EU)

Model: RTL8851BE

ASUS-A620-Plus-Wi-Fi-6-Motherboards-FIG-24

Warranty

ASUS Guarantee Information

ASUS offers a voluntary manufacturer’s Commercial Guarantee.
ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee.
This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee.

For all the guarantee information, please visit https://www.asus.com/support.