PISEN TP-C43 2 In 1 Magnetic Wireless Charger Pad User Manual
- June 20, 2024
- PISEN
Table of Contents
PISEN TP-C43 2 In 1 Magnetic Wireless Charger Pad
Mag Depot 2 In 1 Wireless Charging Pad ( TP-C43)
User Manual
We appreciate your purchase of Mag Depot 2 In 1 Wireless Charging Pad.
Please read these instructions carefully to ensure safe and smooth operation,
and keep this instructions properly for future reference.
The product is used for charging mobile phones or digital products which can
be charged in a wireless manner.
Technical specifications
Note
- The charger is an optional accessory.
- The above data is sourced from the PISEN Laboratory, while actual parameters may vary with product or other factors.
Schematic Diagram of Product Interface
Note: Please confirm whether your device supports the wireless charging function before charging the product. This product also supports the iPhone 12-15 series magnetic wireless charging & Qi standard mobile phone wireless charging & headphones & iWatch wireless charging
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Precautions
- In order to ensure the long-term use of wireless charging, do not put magnetic cards, bank cards, keys and other magnetic metal items on the wireless charging device when charging.
- If the phone does not charge properly, please move your phone slightly to find the best charging location for the phone and wireless charge.
- Please ensure that the power adapter supports the PD protocol, the output power is 30W or above, and there is no foreign matter such as metal between the wireless charger and the charging device.
- The maximum folding Angle of the mobile phone magnetic wireless charge is 90°. Do not exceed this Angle during use to avoid damage to the device.
- Foreign body detection: coins and other metal objects adsorbed on the edge of the magnet, FOD alarm reminder.
- High temperature detection: Foreign body temperature rise is higher than 70 ° C, automatic off protection.
- Only compatible with Apple magnetic series official protective case and Pinwin magnetic protective case, does not guarantee the compatibility of third-party magnet accessories, please choose carefully to prevent heat/failure and other situations.
- This product does not have waterproof performance, please stay away from all liquid substances
- This product is not a toy product, please avoid children under the age of 14.
- If you do not use this product for a long time, please power off the wireless charger and store it properly.
Design By Pisen Made in China Manufactured by: GUANGDONG PISEN ELECTRONICS CO., LTD.
Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province China
PISEN The brand belongs to GUANGDONG PISEN ELECTRONICS CO., LTD.
For FAQs and more help information, please visit : https://en.pisengroup.com
Contact: support@pisengroup.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>