VOLLRATH 741102D Drop In Induction Retherm Installation Guide

June 16, 2024
VOLLRATH

VOLLRATH 741102D Drop In Induction Retherm

Product Information

  • Specifications:
    • Brand: Vollrath
    • Model: Not specified (refer to Part No. 26237-1)
    • Manufacturer: The Vollrath Company, L.L.C.
    • Country of Origin: U.S.A.
    • Contact Information:
    • Main Tel: 800.624.2051 or 920.457.4851
    • Main Fax: 800.752.5620 or 920.459.6573
    • Customer Service: 800.628.0830
    • Canada Customer Service: 800.695.8560

Product Usage Instructions

  • Installation Instructions:
    • Place the rim gasket around the designated area without stretching it.
    • If needed, use scissors to trim the gasket to the proper length.
    • Refer to the Operator’s Manual for the continuation of the installation procedure.

FAQs

  • Q: What should I do if the rim gasket is too long?
    • A: Use scissors to trim the gasket to the proper length before proceeding with the installation.
  • Q: Where can I find technical support for Vollrath products?
    • A: For technical services related to Induction Products, call 800.825.6036. For Countertop Warming Products, dial 800.354.1970. For all other products, contact 800.628.0832.

Gasket Installation

Mirage® Drop-in Induction Warmer/Rethermalizer Gasket Installation

Purpose

This document is a supplement to the Operator’s Manual. It explains how to install the gasket onto the rim of the Mirage® Drop-in Induction Warmer and Rethermalizer. Install the gasket before performing the installation procedure in the Operator’s Manual.
NOTICE: Gasket installation is mandatory. Failure to install the gasket will void the warranty.

  1. Turn the equipment so the bottom is facing up.
  2. Set the equipment on a stable surface, such as a countertop.
  3. Lubricate the gasket with a small amount of liquid dish soap or water.
  4. Carefully press the groove of the gasket onto the underside edge of the rim. Take care to evenly press the gasket as you feed it onto the rim, without stretching it.
  5. If needed, use scissors to trim the gasket to the proper length.
  6. Continue with the installation procedure in the Operator’s Manual.

CONTACT

  • The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
  • Main Tel: 800.624.2051 or 920.457.4851
  • Main Fax: 800.752.5620 or 920.459.6573
  • Customer Service: 800.628.0830
  • Canada Customer Service: 800.695.8560
  • Technical Servicestechservicereps@vollrathco.com.
  • Induction Products: 800.825.6036
  • Countertop Warming Products: 800.354.1970
  • All Other Products: 800.628.0832
  • www.vollrath.com.
  • © 2015 The Vollrath Company L.L.C.
  • Part No. 26237-1 11/5/15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals