Omni OC33 Share Cycling Smart Lock Instruction Manual
- June 16, 2024
- Omni
Table of Contents
Omni OC33 Share Cycling Smart Lock
Product Specifications
- Communication: LTE, GPS, BLE4.0
- Compatibility: Android 4.3 with Bluetooth 4.0BLE, 1280×720 resolution; iOS 7.1 and iPhone 4s
Product Usage Instructions
APP Installation & Account Registration
- Download the APP software from the Operator Company’s website based on your smartphone’s operating system.
- Register an account and log in using your phone number while connected to the network.
- Complete the deposit payment.
Unlock/Lock Operating Instructions
- Ensure Bluetooth is enabled on your phone.
- Open the APP and press the QR code button at the bottom of the UI to scan the QR code on the bike lock.
- When the phone reads the QR code, the lock will automatically unlock.
- Manually lock the bike after use. Once locked, the Cloud Server will stop time computation and deduct fees.
Note: Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.
APP UI Introduction
- Home page
- Scanning the QR code page
- Unlocking and using the bike page
- Finish using the bike and fee deduction page
Frequently Asked Questions
Q: What are the hardware requirements for using the smart lock with a smartphone?
A: The smart lock requires Android 4.3 or above with Bluetooth 4.0BLE and a screen resolution of 1280×720, or iOS 7.1 and iPhone 4s model.
Q: How do I unlock and lock the bike using the smart lock?
A: To unlock, open the APP, scan the QR code on the bike lock, and the lock will automatically unlock. To lock manually, ensure the Cloud Server receives the locked info to stop time computation and deduct fees.
Q: What should I do if I encounter interference issues?
A: If you experience interference, ensure that the device is operated with a minimum distance of 20cm between the radiator and your body to comply with FCC regulations.
Introduction
This is a smart lock for sharing a bike, it communicates with a smartphone APP by LET, GPS, and BLE4.0 to unlock, Cloud server computes the time and payment automatically.
APP installation &account Register
- Please download the APP software from the Operator Company office web according to the user’s smartphone operating system and install it.
- Users register an account and log in by the phone number(normal use), this operating step needs a phone connected to the network.
- Pay the deposit.
Unlock/lock operating instruction
- Open the Bluetooth of the phone.
- Start the APP, press the button QR code at the bottom of the APP UI, enter into scanning QR code page, and aim at the QR code on the bike lock, when the phone reads the QR code information, it will unlock automatically and go into unlocked status.
- Lock manually after finishing using a bike, when the Cloud Server receives the locked info,time computing stop, and fee deduction.
- smart lock needs to work with smart phone, phone hardware circumstance request as below.
- Above Android 4.3 version, hardware supporting Bluetooth 4. OBLE, the best screen resolution 1280×720; Above IOS 7. 1 version and iPhone 4s model.
APP Ul introduction
home page
scanning QR code page
unlocking and using the bike page
finish using the bike and fee deduction page.
FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>