ThermoSphere TSCR-0500 Convector Panel Heater Instructions
- June 16, 2024
- thermoSphere
Table of Contents
ThermoSphere TSCR-0500 Convector Panel Heater
Product Information
Specifications
- Voltage: 230V
- Frequency: 50Hz
- IEC protection: Class II
- IP rating: IP24
- Cable length: 1.5m (white)
- Wiring connection: Direct to mains
- Warranty: 2 years
The Convector Panel Heater is a lightweight and easy-to-install electric heater suitable for almost any room. It features a digital control panel with a 24/7 timer for convenient operation.
Product Usage Instructions
Installation
- Choose a suitable location for mounting the heater.
- Ensure proper electrical connections as per the wiring diagram provided.
- Mount the heater securely on the wall using appropriate fixtures.
- Ensure proper ventilation around the heater for efficient operation.
Operation
- Use the digital control panel to set the desired temperature and operating modes.
- Utilize the 24/7 timer feature for scheduled heating.
- Maintain adequate clearance around the heater to prevent overheating.
Maintenance
- Regularly clean the air inlet and outlet to ensure optimal airflow.
- Inspect the heater for any signs of damage or wear and tear.
- Keep the control panel free from dust and debris for smooth operation.
FAQ
-
Q: Can the Convector Panel Heater be used in bathrooms?
A: The Convector Panel Heater has an IP24 rating, making it suitable for use in bathrooms where it may be exposed to moisture. However, always follow local electrical regulations for bathroom installations. -
Q: What is the maximum area coverage for each model?
A: The maximum area coverage varies by model, ranging from 5m² to 18m². Refer to the product specifications for detailed information. -
Q: How can I contact customer support for further assistance?
A: You can reach our customer support team at 0800 019 5899 or email us at enquiries@thermosphere.com for any queries or assistance.
INTRODUCTION
Lightweight and easy to install as an effective, direct action convector heater for almost any room. Digital control panel with 24/7 timer.
- Electronic thermostat with LCD display.
- 7-day programmable heating schedule.
- Manual temperature setting.
- Open window detection.
- Tubular heating element.
- Overheat protection switch.
Technical data
- Voltage 230V 50Hz
- IEC protection Class II
- IP rating IP24
- Cable length 1.5m (white)
- Wiring connection Direct to mains
- Warranty 2 years
Available sizes and outputs
Mounting dimensions
Anatomy of a convector panel heater
- Air outlet on top of the front face panel.
- Air inlet is in the base of the heater.
- Digital controls are on the right hand side of the top panel.
- The cable is situated in the middle of the right hand side panel.
- The ambient temperature sensor is at the bottom of the right hand side panel.
0800 019 5899
enquiries@thermosphere.com
thermosphere.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>