ACCELMIX XLB-1000 Commercial Blender with Paddle Controls Instruction Manual

ACCELMIX XLB-1000 Commercial Blender with Paddle Controls

Table

Model| Voltage ~ Hz| Power| Amperage| Power Cord| Volume| Overall Height
---|---|---|---|---|---|---
XLB- 1000| 120V ~ 60Hz| 1450W| 12.1A| 15A| 68oz (2 L)| 20” (508mm)
Plug Type| Base Dimensions
NEMA 5-15P| Width| Depth| Height
9” (228mm)| 10” (254mm)| 8-1/2” (216mm)

BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this ACCELMIXTM commercial blender. When used as intended, and with proper care and maintenance, you are sure to experience years of reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this manual carefully. I t is important to keep these instructions in a safe place for future reference.

Important For Future Reference

Please complete the following information and retain this manual for the life of the product. This information is required for Warranty Service and/or parts. Please see Page 10 for more information on your Warranty and How to Register.

WARNING: Improper installation ,adjustment, alteration, service or maintenance can cause property damage, injury, or death. Read the installation, opera tion, and maintenance instructions thoroughly before installing or servicing this equipment.

CAUTION: These models are designed, built, and sold for commercial use only. If these models are positioned so the general public can use the equipment, make sure that caution sign s, warning s, and operating instructions are clearly posted near each unit so that anyone using the equipment will use it correctly and not injure themselves or harm the equipment.

WARNING: A factory authorized service provider should handle all maintenance and repair . Before doing any maintenance or repair , follow service set up arrangement on page 10.

Introduction

Congratulations on the purchase of your ACCELMIXTM machine. Please take the time to carefully read through this manual to ensure the machine is operated and maintained properly, to ensure the best possible performance from this product for many years.

WINCO will not accept liability if:

• The instructions in this manual have not been followed correctly.
• Non-authorized personnel have tampered with the machine.
• Non-original spare parts are used.
• The machine has not been handled and cleaned correctly.
• There is any use damage to the unit.

Package Contents

All units come with an Operating Instruction Manual and the following:

• XLB-1000 Commercial Blender Base
• 68 oz. (2 L) Blender Container and Lid
• Tamper

WINCO®prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free of damage. Should you find any damage as result of freight, please contact your WINCO® dealer immediately.

Unpacking the Equipment

Dispose of all packaging materials in an environmentally responsible manner.

1.  Remove all packing materials and tape, as well as any protective plastic and cardboard from the unit.
2.  Clean any glue residue left over from the plastic or tape.
3. Place the unit in the desired position and height.

Save the original box and packaging for use in packaging and shipping the equipment if services ar e needed.

Function and Purpose

This unit is intended to be used in commercial food-service operations only. It is not intended for household, industrial or laboratory use.

NOTE
Please remember that this manual and the warning labels do not replace the need to be alert, to properly train and supervise operators, and to use common sense when using this equipment.

Important Safeguards

To ensure safe installation and operation, please carefully read and understand the following statements. Unless the operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment bear the responsibility to make certain that this equipment is used properly and safely, and to strictly follow all of the instructions contained in this manual and the requirements of local, state or federal law.
Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately trained and supervised, and have read and understood this manual.
Owners should also ensure that no customers, visitors or other unauthorized personnel come in contact with this equipment. It is the responsibility of the owner and the operator to remain alert to any hazards posed by the function of this equipment.
If there is ever uncertainty about a particular task or the proper method of operating this equipment, ask an experienced supervisor.

Safety Warnings

This manual contains a number of precautions to follow to help promote safe use of this equipment.

| WARNING
---|---
USE CAUTION WHEN TOUCHING THE UNIT.
**| WARNING**
---|---
USE CAUTION WHEN HANDLING THE UNIT.

FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WARNING
improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death.

Read these installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

Warning

Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment.

Caution Before Using Appliance

1. Read all instructions carefully. Do not use this appliance for anything other than its intended use.
2. Unplug from outlet when not in use, prior to installing or removing parts, and before cleaning. Allow for the device blades/gear to stop rotating.
3. To protect against the risk of electrical shock, do not immerse the appliance, cord or plug in water or other liquids.

| WARNING
---|---
Electrical Shock Hazard Keep water and other liquids from entering the inside of the unit. Liquid inside the unit could cause an electrical shock.
Do not spray water or cleaning products. Liquid could contact the electrical components and cause a short circuit or an electrical shock. Do not use unit if power cord is damaged or has been modified.
4. Avoid contact with moving parts. 5. Do not operate this device or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions, or is dropped or damaged in any manner. Return to the nearest WINCO® Authorized Service Center for examination, repair, and / or adjustment.
Proper Grounding
This machine is provided with a three-pronged grounding plug. The outlet to which this plug is connected must be properly grounded. If the receptacle is not the proper grounding type, contact an electrician. DO NOT, under any circumstances, cut or remove the third ground prong from the power cord or use any adapter plug.
USE A GROUNDED OUTLET DO NOT ADD AN ADAPTOR TO THE PLUG
**| WARNING
---|---
Fire Hazard.
** Correct installation precautions, procedures and regulations must be followed. Operation and safety training is necessary for all users of this equipment
6. . The use of accessory attachments not recommended by WINCO may cause fire, electric shock, or injury. 7. Not intended for outdoor installation. 8. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. 9. Do not place on or near a heat source. 10. Do not overload the unit. 11. This appliance should always be on a stable and steady countertop or table. 12. This appliance is not intended for use by individuals (including children) with reduced or impaired physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they have been given proper supervision or instruction concerning the use of this appliance by a person responsible for their safety. 13. Children should be supervised at all times to ensure that they do not play with this appliance. 14. Do not place metal objects such as knives, forks or spoons in blender container as they can damage the blender and/or cause serious injury. 15. Ensure proper grounding: Use of attached 3-prong plug. 16. Do not try to override the safety switch on the blender base for the blender container. This may damage the switch and cause injury. 17. Do not try to stop the center rotating gear on the blender base or prevent it from spinning. This may cause damage to the unit and/or injury

Operation

1. Make sure power is off and speed dial is turned to low.
2. Plug in power cord attached to the base into an electrical outlet.
3. Secure the container on top of base.
4. Add ingredients as desired.
5. Place lid on container.
6. Turn on and increase speed or pulse ingredients to desired consistency.
7. If ingredients stick to the walls or do not fall near the blades, remove the clear plug in center of lid and use tamper to move items down toward the blades.
8. When blending is complete, turn off and allow blades to come to a complete stop before removing container.

Caution

DO NOT use the tamper without the container lid securely on. The lid will keep the tamper from touching the blades. If lid is completely removed, the tamper could make contact with the blades, causing contamination of ingredients, damage to the blades/motor and possible injury.

The blender has a safety which will prevent it from spinning unless the container is properly secured to the base. Removing the container will automatically stop the unit. However, doing this is not recommended due to possible damage to the gears between the base and container

Cleaning & Sanitizing

Before using this equipment it must be cleaned and dried thoroughly. Clean all surfaces before use. Failure to clean surfaces before using the unit could cause food contamination.

• Wash, rinse, sanitize and dry container prior to initial use, and whenever it will not be used again within a period of 1 hour. Follow manufacturer’s instructions for detergent and sanitizer concentration.
• Half fill the container with warm water and a non-sudsing detergent.
• Attach the lid and lid plug.
• Turn the machine ON and gradually increase the speed to MAX and run for 60 seconds.
• Turn off, remove container and rinse with clear warm water.
• Fill container with sanitizing solution, cover and run for 60 seconds.
• Remove the lid and lid plug, and wash along with the tamper in warm soapy water. Rinse and dry with a soft cloth.
• The power base can be wiped off with a damp cloth.
• Do not immerse the base of unit completely in water or use a dishwasher to clean.

Warning: do not allow excess liquid to drip into ventilation openings as this may affect the electrical and
mechanical systems.

NOTE:
Proper cleaning instructions must be followed; otherwise, operation of the unit may be seriously impaired. Do not wash parts in an automatic dishwasher.

Safety

A WINCO® Approved Service Technician should carry out repairs if necessary. Do not remove any components or service panels on this product.

If the power cord is damaged, it must be replaced by a WINCO® Approved Service Technician in order to avoid a hazard.

Service and Repair

There are no user-serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the unit yourself.

To initiate warranty service contact: support@wincous.com
or call: 973-295-3899.

DO NOT send unit to WINCO® without first contacting our customer service department.

See “Limited Warranty” section on page 10 for details.

Troubleshooting

correctly plugged in and outlet is working.
Breaker has blown| Reset breaker button on the rear base of the unit.
Container is not sitting on base properly| Make sure container is secured to the base correctly.
Power switch has not been turned on| Check that the unit is plugged in and turned on.
Plug/cord or external wiring is damaged| Call WINCO to make service arrangements through their service provider network.
Internal wiring fault
The unit is vibrating too much| Unit is not on stable surface| Place the unit on a level surface or on top of a vibration resistant surface such as a rubber mat.
Lid is not on properly| Adjust the lid so that if fits tightly and is centered on the container.
Loose hardware| Tighten any loose screws, nuts or bolts.

Exploded View

Model XLB-1000

Spare Parts List

model : xlb- 1000

No.| description| part #| qty
1| Container set (2-7)| XLB1000P2| 1
2| Refilling cap| XLB1000P4| 1
3| Lid| XLB1000P3| 1
4| Blade assembly| XLB1000P5| 1
5| Pitcher| XLB1000P11| 1
6| Gasket| XLB1000P12| 1
7| Blade fixing block| XLB1000P13| 1
8| Rod Set| XLB1000P1| 1
9| Power cord| XLB1000P15| 1
10| Mushroom head| XLB1000P10| 1
11| Coaster| XLB1000P6| 1
12| Power switch| XLB1000P8| 1
13| Speed control knob| XLB1000P7| 1
14| Pulse Switch| XLB1000P8| 1
15| Upper cover| Contact Factory| 1
16| Safety Switch| XLB1000P14| 1
17| Motor| XLB1000P17| 1
18| PCB Board| XLB1000P18| 1
19| Over current Micro Switch| XLB1000P16| 1
20| Bottom| Contact Factory| 1
21| Rubber feet| XLB1000P9| 4

Limited Warranty

WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date, whichever date occurs first.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES , WHETHER EXPRESSED OR IMPLIED . WINCO EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPL IED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

WINCO ’S OBLIGATION AND LIABILITY UNDE RTHIS WARRANTY ISEXPRESSLY LIMITED TO REPAIRING AND REPLACING EQUIPMENT THAT PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD .

I N NO EVENT SHALL WINCO BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY , INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY , PERSONAL INJURY,LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES , OR STATUTORY OR EXEMPLARY DAMAGES , WHETHER IN NEGLIGENCE , WARRANTY,STRICT LIABILITY , OR OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent transferees.

Warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess water, fire, normal wear, improper set up and use. Periodic maintenance is not covered.

This warranty is not in force until such time as a properly completed and digitally signed Installation/Warranty Registration has been received by WINCO within 30 days from the date of installation.

Warranty Service

To initiate warranty service contact: support@wincous.com
or cal l : 973-295-3899
DO NOT send unit to WINCO® without first contacting our customer service department

Register onlin e at:
http://support.wincous.com
Proof of purchase is required to extend warranty more than 1 year from date of shipment from the factory.

Limited Warranty

THEFOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEME NT BETWEEN THE BUYER AND SELLER. WINCO ® NEITHE R ASSUMES NOR AUTHO RIZES ANY PERSO NSTO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECT ION WITH SAID EQUIPME NT.

Examples of items not covered under warranty, but not limited to just these items:

1. Acts of God, fire, water damage, burglary, accident, theft.
2. Freight damage.
3. Improper installation or alteration of equipment.
4. Use of generic or after-market parts.
5. Repairs made by anyone other than a WINCO® designated service provider.
6. Lubrication.
7. Expendable wear parts, adjustable feet, blown fuses, lamps, etc.
8. Cleaning of equipment.
9. Misuse or abuse

www.wincous.com

References

• Winco

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>