ANKER A2519 Power Wave II Pad Instruction Manual
- June 3, 2024
- Anker
Table of Contents
A2519 Power Wave II Pad
Instruction Manual
A2519 Power Wave II Pad
| LED Indicator | Status |
|---|---|
| Solid blue for 3 seconds, then off | Connected to power |
| Solid blue | Charging mobile device |
| Flashing blue | Metal or abnormal objects detected |
| Flashing green | Loose connection |
Re-plug the adapter and try again
- You cannot charge your device wirelessly in these scenarios:
- using a case with a magnetic/iron plate;
- using a case with a pop socket;
- using an ultra-thick (> 5 mm) protective phone case.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
- Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body. Product Name:
PowerWave II Sense Pad
IC Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC RF Exposure Statement:
This equipment complies with IC Radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 10cm between the product and your body.
Specifications
| Input | 12V 2A |
|---|---|
| Wireless Output | 15W Max |
| Size | 90 x 90 x 13 mm / 3.5 x 3.5 x 0.5 in |
| Weight | 89 g / 3.1 oz |
| Radiated H-Field | 1 |
| TX/RX Frequency Range | 110~205 kHz (Only for EU and UK) |
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2519 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com/
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-
Strasse 3-5, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2519 is in
compliance with Directives: Radio Equipment Regulations 2017 and The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the UK declaration of
conformity is available at the following internet address:
https://www.anker.com/
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
** Indoor use only.
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Customer Service
* 24-month limited warranty
Lifetime technical support
@Anker
@Anker Japan
@Anker Deutschland| @AnkerOfficial
@Anker_JP| **** @anker_official
@anker_jp
---|---|---
**support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
** (US) +1
(800)988 7973 Mon-Fri 6:15AM – 5:00PM(PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
For FAQs and more information, please visit:
https://www.anker.com/support
51005002170 V05
A2519
Documents / Resources
|
ANKER A2519 Power Wave II
Pad
[pdf] Instruction Manual
A2519A, 2AOKB-A2519A, 2AOKBA2519A, A2519 Power Wave II Pad, A2519, Power Wave
II Pad, Power Pad, Wave II Pad
---|---