Radioddity K1 Bluetooth Headset Instruction Manual
- June 16, 2024
- Radioddity
Table of Contents
Radioddity K1 Bluetooth Headset
Unpack and Check Accessories
Please remove the product from the pack box carefully, please check whether the box contains all items listed in the table below before the pack box. If any items are lost or damaged during delivery, please contact the seller.
All Items
Product Description
Walkie talkie bluetooth headset(Enhanced version)
This product can adapt to two devices at the same time. It is equipped with
a built-in walkie-talkie dedicated wireless “PTT” button and environmental
noise reduction function. It achieves simultaneous dual standby and radio
priority calls when the bluetooth headset is in a mobile phone call or
multimedia audio playing mode. When the two-way radio receives a signal, it
enters the intercom call state automatically.
When the intercom call ends, it returns to multimedia mode automatically after 8 seconds. When a bluetooth headset is connected to a walkie-talkie and it needs to be connected to a mobile phone at the same time, please turn off the bluetooth headset, and pair the bluetooth headset and the mobile phone. When the bluetooth headset connects with the mobile phone successfully, restart the bluetooth headset. It will connect the walkie-talkie and the mobile phone automatically.
- Walkie talkie “PTT” button（ ）
- On/Off button（ ）
- Long press 2 seconds to turn on, then long press 2 seconds to turn off.
- Long press 6 seconds to enter bluetooth pairing.
- Press to pause and continue when you are listening to music. （ ）
- Press to answer the phone call. Then press again to end the call. （ ）
- Volume up button
- Press the button to turn up the volume.
- Long press 2 seconds to the previous song.
- Volume down button
- Press the button to turn down the volume.
- Long press 2 seconds to the next song.
- Headset earphones
- USB charging port
- Indicator
- More functions
- Noise reduction： Press power and
- Volumn + button （②+④）simultaneously.
- Language switching： Press power and
- Volumn – button（ ②+③）simultaneously.
- Pairing elimination: press Volume + and
- Volumn – button （②+③）simultaneously.
- You will hear a beep.
Walkie -Talkie wireless adapter
Two-Way Radio Bluetooth Adapter Pairing
On/Off
Long press the Multi-function button for 2 seconds, blue light glints, and
power on. Then long press the Multi-function button for 3 seconds, red light
glints, power off.
Pairing
When the bluetooth adapter is TURNED OFF, long press the Multi-function button
for about 7 seconds to enter pairing status. ( Red and blue light glint
alternately. )
Put the wireless PTT key and the bluetooth adapter together. Press the wireless PTT key’s button for about 1 second. The Bluetooth adapter’s red light disappears. It means the wireless PTT key is paired with a Bluetooth adapter successfully. Put the bluetooth adapter and the bluetooth headset together(both red and blue lights glint alternately). Wait for about 40 seconds(first pairing). When their alternant red and blue lights disappear only blue light glints. It means the bluetooth earpiece is paired with the bluetooth adapter successfully.
Indicator Light
- Blue light flashes slowly: power on, in standby mode.
- Blue light flashes fast: the bluetooth connection is interrupted. please check whether the bluetooth earphone is turned on or has exceeded the
- The red light on the device is transmitting. When it is over, the red light is off.
- Low battery tips: In standby mode, the red light flashes means low battery, please charge in time.
Installation Removal
Installation: Insert the adapter into the intercom port. (figure 1)
Removal unplug the adapter from the intercom port Figure 2′
Wireless PTT key
Charging Instructions
This product uses a MINI USB charging port. It can be charged by a standard DC
5V power supply(computer’s USB port, power bank). When it is charging–red
light on. If it is fully charged– red light off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>