Radioddity X6100-K Spare Parts Kit Instruction Manual
- June 1, 2024
- Radioddity
Table of Contents
X6100-K Spare Parts Kit
Instruction Manual
X6100-K Spare Parts Kit
Number| Device model| Component pictures| Function|
Pictures of repair parts
---|---|---|---|---
1| X6100 EC11 encoder| | For MFK multi-function knobs and VOL/SQURFG knobs|
2| TF self-elastic deck| | TF card slot|
3| Fast-blow fuse 4A/63V/12t=
3.2-4.2| | Used to protect the middle board, it will fuse under high current|
4| X6100 side plastic frame| | Used to decorate and protect side panels|
5| X6100A decorative parts| | Used to decorate and protect the main panel|
6| Bracket steel ball stainless steel, diameter 2.38mm| | Steel balls are used
on the side panels to give the machine feet a sense of damping when rotating|
7| MIC seat| | Hand microphone network port socket, used to connect hand
microphones| 
8| Antenna Q9| | For connection to the feeder end of the antenna|
9| Knob| | Embedded on the encoder and form a function knob with the encoder|
10| Tempered glass| | Protect screen from scratches|
11| RF connector U.FL socket| | Fixed signal line, which together with the
signal line
plays the role of transmitting signals|
12| RF connection cable:
Double-ended IPEX RF1.13 cable, length 50mm| | Used to connect the midboard
and the antenna board to transmit signals|
13| Electret microphone/ 6030| 
| The machine’s built-in microphone|
14| 3x6x2.5mm patch button| | Buttons for the main panel|