ZEBRA MC9401 Handheld Mobile Computer Instructions

June 15, 2024
ZEBRA

ZEBRA MC9401 Handheld Mobile Computer

Specifications

  • Model: MN-004785-02CS
  • Laser: SE4770, SE5800
  • LED: Yes

Product Usage Instructions

Installation in Vehicle
Follow the provided installation instructions for mounting the product in a vehicle securely.

Road Safety
Ensure road safety by adhering to traffic regulations and maintaining focus while using the product.

Battery Information

Refer to the battery information section for details on battery usage and maintenance.

Regulatory Compliance
Comply with regulatory requirements in the United States, Canada, and other regions as applicable. Avoid use in hazardous locations.

RF Exposure Requirements

Ensure compliance with RF exposure requirements by maintaining distance between transmitters and antennas. Avoid co-location within 20 cm.

Software Support

For software support, refer to the provided resources or contact customer support.

Information on Directives

This device is approved by Zebra Technologies Corporation. This guide applies to model number: MC9401. All Zebra devices should be marked as complying with the directives applicable where they are sold.

Translations

Translations for various regions are provided, including but not limited to Bulgarian, Czech, German, Greek, Spanish, French, Croatian, Hungarian, Italian, Lithuanian, Latvian, Dutch, Polish, Portuguese, Romanian, Slovak, Slovenian, Finnish, Swedish, Turkish, and Chinese. For support visit zebra.com/support.

Warning Statements

Only use accessories, batteries, and power supplies specifically approved by Zebra. The device is not intended to be sold without these approved items. Failure to use approved items may result in reduced performance and operation or may pose a risk of fire or explosion.

Bluetooth Wireless Technology
This product is equipped with Bluetooth functionality. For more information or a list of Bluetooth SIG members, please visit bluetooth.com.

Legal Marking
Product marking, including radio and RFID devices, comply with legal requirements and are approved for use under specific certifications. Detailed information on markings and the EU Declaration of Conformity is available at zebra.com/doc.

Health and Safety Recommendations

Ergonomic Recommendations
To reduce or minimize the risk of ergonomic injury, always follow proper procedures and consult with your occupational health and safety manager to ensure compliance with your organization’s safety program.

Installation in Vehicles
Improperly installed or insufficiently shielded electronic systems in motor vehicles, including safety systems, can be affected by radio frequency signals. Ensure installation does not adversely affect vehicle operation or safety systems.

IMPORTANT:  Before installing or using the device, check with the vehicle manufacturer or equipment provider about potential interference with vehicle systems.

Road Safety

Comply with local laws regarding the use of mobile devices and driving. Ensure the device is mounted in a way that does not obstruct the driver’s view or interfere with vehicle controls.

Restricted Use Areas
Do not use the device in areas where its use could interfere with or obstruct emergency or safety signs, such as in hospitals or on aircraft.

Safety in Hazardous Locations and in Flight
The use of radio-frequency energy can interfere with aircraft navigation and communication systems, as well as medical devices such as pacemakers. Follow all instructions for use in such environments to prevent interference.

Instructions for Reducing Radio Frequency Exposure
Follow the provided instructions to minimize exposure to radio frequency energy when using the device.

Laser Devices
The SE4770 and SE5800 laser devices comply with international standards and regulations, including deviations according to Laser Notice No. 56, dated May 08, 2019, and IEC/EN 60825-1:2014. Do not look into the laser beam.

LED Devices
LED devices are classified under risk groups according to IEC 62471:2006 and EN 62471:2008 standards.

Power Source

WARNING: To prevent electric shock, use only with a certified power supply from Zebra or one with equivalent specifications. Improper use of power sources not approved by Zebra could result in a hazardous condition.

Batteries and Chargers

Information regarding Zebra-approved batteries and chargers. Improper replacement or use of non-approved batteries could result in a fire, explosion, or other hazards.

Model BT-000370  (3.6 VDC, 7000 mAh)

Model BT-000371  (3.6 VDC, 5000 mAh)

Regulatory Information for the United States and Canada

Radio Frequency Interference Notices
Complies with FCC Part 15 Rules and Industry Canada’s license-exempt RSS standards. Devices must accept any interference received, including that which may cause undesired operation.

RF Exposure Requirements – FCC and ISED
Requirements for RF exposure compliance, including for mobile devices and co-located equipment. Specific instructions for use in hotspot mode, and operational requirements for reducing RF exposure.

Hazardous Locations
Regulatory information for Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G; Class III, or Non-Hazardous Locations only. Warnings about the risk of explosion and battery replacement in safe areas.

International Compliance

Compliance statements for France, Mexico, South Korea, China, Turkey, Thailand, and the United Kingdom.

Warranty and Service Information
Find Zebra’s complete warranty terms for hardware products at zebra.com/warranty. For device issues or software support, visit zebra.com/support.

Software Support
Zebra ensures customers have access to the latest certified software to keep devices running at peak performance. Instructions for obtaining the latest software are provided.

Product Support Information
For information on using this product, refer to the user guide at zebra.com/mc94-info. For product-related questions, visit the knowledge base at the Zebra Support Community supportcommunity.zebra.com/s/knowledge- base.

Patent Information
For details on patents Zebra holds, visit zebra.com.

FAQ

Where can I find support for my Zebra device?
Support for Zebra devices can be found at zebra.com/support and the Zebra Support Community at supportcommunity.zebra.com.

How do I find information on radio frequency exposure?
Information on RF exposure can be found within the device’s regulatory documentation or at zebra.com/doc.

How can I ensure I’m using approved batteries and chargers with my device?
Refer to the user guide and only use batteries and chargers approved by Zebra. For specific model numbers, visit zebra.com/batterydocumentation.

What should I do if I encounter interference with my device?
Consult the device’s user guide for instructions on minimizing interference and ensure compliance with local regulations.

Can the product be used in hazardous locations?
No, the docking port should not be used in hazardous locations due to explosion hazards.

How should used batteries be disposed of?
Dispose of used batteries according to the provided instructions to avoid risks of explosion or environmental harm.

Is the product compliant with FCC regulations?
Yes, the product complies with Part 15 of the FCC Rules regarding radio frequency interference.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals