DUNE 4WD Rooftop Tent Fitting Kits Installation Guide

DUNE 4WD Rooftop Tent Fitting Kits

Product Description

This semi-auto rooftop tent could be set up easily by 2 persons, set up and folded down in seconds with a patented gas strut-assisted opening mechanism. Enjoy the outdoor life in whatever weather!

Material and specification

• A. The whole frame uses aluminium alloy parts whilst using strong 100% virgin nylon.
• B. Heavy-duty tent material and all seam taped for great waterproofing.
• C. Good quality 50mm foam mattress provides a comfortable sleep experience.
• D. Telescopic aluminium alloy ladder is removable and endure 150kg
• E. Tent fully opened dimensions: 205x139x100cm
• F. Tent closed dimensions: 221x155x25cm
• G. Net Weight: 75kg (ladder not included) Gross Weight: 94 kg

Product frame

Installation

Two detachable roof bars can be installed horizontally or vertically on the shell as needed. Please install the bars on the shell before mounting the tent on the car roof.

1. Insert fixed parts of the bar into the slot of the frame on both sides.
2. Adjust the height of the bar then screw tightly with M8x15mm Hex Bolt, M8 Flat Washer and M8 Arc Washer.
3. If installed vertically, use Hex Wrench to adjust the direction of fixed parts of the bar as below, then follow steps 1 and 2.

Note
Please make sure nothing is loaded on the top shell when opening/closing the tent.

1. Install your roof rack per the manufacturer’s instructions and in the load-bearing position on the vehicle.
2. Lift the tent onto the rack from the car side. Adjust the tent to the roof centre, ensuring the rear door can be opened/closed.
3. Slide the T Shape Bolts into the rails from two sides(as P1).
4. Slide T Shape Bolts into the middle hole of the rail, with a U-shape stator, M8 Arc Washer, M8 Flat Washer and Plastic Nut lightly screwed in advance. (as P2)
5. Screw the other side of U Shaped Stator with components in the order as above, and ensure the Stator is tightened(as P3, same operation for rest).

INCLUDED TOOLS

1. Release all buckles around the tent.

2. Push up the tent from its back side.
   Setting up

3. The tent will be opened automatically with the gas strut assist.

4. Push up the shell from the front side.

5. Hang the ladder on the frame, then adjust the length. Setting up:  (Ensure the ladder is stable)

6. The tent is fully set up.

Folding down

1. Close all windows. Hook the elastic ropes inside the tent(as P1). Zip up the front door to the two-thirds position. Tuck shoe bags inside(as P2). Then press down the shell.
2. Pull down the belt puller on the back side to collapse the tent.
3. Remove and then shorten the ladder. Then lock all buckles around the tent.
   (Notice: ensure no fabric is exposed to the outside)

TROUBLESHOOTING TIPS (IF NEEDED)

Once the cylinder rod does not work, pls double-check as below.

1. If the cylinder rod is covered by any fabric.
2. If there is any air leaking from the cylinder rod. If yes, the cylinder rods need to be replaced.
3. Loosen the scews of the cylinder rod with a screwdriver, and change a new one. pls, see the pictures below.

Usage of the spare locking sticks
Fasten the 2pcs locking sticks to the upper cover gas structs on both sides from windows when setting up the Dlx hardtop roof tent. (as P1)

Remove the 2pcs locking sticks before folding down the Dlx hardtop roof tent. (as P2)

This is an emergency solution to prevent the top lid from collapsing when gas structure pressure is insufficient especially when combined with the annex. Meanwhile, it can extend the service life of gas struct poles.

Safety Information

• We recommend that you DO NOT drive over 70mph ( 11Okmh) while using your rooftop tent and that you always adhere to speed limits.
• CHECK at the start of every journey and at regular intervals that your rooftop tent is firmly fixed to your roof racks and all locking straps are securely fastened.
• DO NOT use your roof tent if there is any visible damage to any part of it or its components, instead contact us to see how we can help. This is especially applicable to the locking straps and buckles.
• Understand that secured loads and incorrectly mounted roof bars can come loose during journeys and can cause serious accidents.
• Make sure that you give due consideration to the change in your vehicle height and drive behaviour (side—wind sensitivity, corner and braking behaviour).
• You must always consult your vehicle and roof bar manuals to ensure you are following their advice, these must always be carried in your vehicle along with your roof tent safety and fitting instructions.
• Do not use bleach, alcohol or ammonia-based cleaning liquids on your roof tent otherwise the surface of your roof tent may get damaged
• Please note the following when using your roof tent:
  • The height of your vehicle can increase by up to 90cm (depending on your roof bars).
  • aware of low entrances, low-hanging branches, etc. z—Wind noise may be generated when travelling with a roof tent —When using an automatic car—-wash facility, your roof tent must first be removed.
  • In addition to these usage instructions, due consideration should also be given to mounting instructions for your roof bars and the operating instructions of your vehicle.
  • For reasons of fuel economy and the safety of other road users, your roof tent and roof bars should be removed when not in use.
  • For your safety, you should only use tested (e.g. GS,—tested) roof bars that are authorised for usage in conjunction with your vehicle.
  • To avoid generating excessive lifting forces, your roof tent should be mounted parallel to the line of the road and not at an angle.
• When climbing in and out of your roof tent always use the ladder with due caution and never allow children to use it alone. Make sure the ladder hooks are in good condition, contact us if you need replacements.
• You must not allow any naked flames in or near your roof tent.

Important Information
The manufacturer is not liable for any damage or accident that may occur as a result of non— non-compliance with these usage instructions, modifications made to parts or the usage of any parts other than the manufacturer’s original parts. The warnings, cautions and instructions in this document can’t cover every possible situation, so it is understood by the operator that common sense and caution must be applied. It is your responsibility to pass these instructions on to any third party who uses this roof tent, including second- hand sales.

Warranty

The manufacturer’s warranty covers manufacturing faults and lasts one year with regular use. It is only valid if the instructions and recommendations in this document are adhered to and only apply to the first owner. Second-hand sales are not covered.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>