DUNE 4WD LP-70254 2m Awning Tent Instruction Manual
- June 13, 2024
- DUNE 4WD
Table of Contents
Instruction Manual 4WD LP-70254 2m Awning Tent
Important:
- Please read these instructions carefully prior to assembly.
- Check the contents before assembly.
- Make sure tent is fully secured with pegs and guy ropes provided to prevent damage or injury.
PART LIST
ASSEMBLY INSTRUCTION
Unfold
the tent.Slide the beading gently into the aluminum groove to fastern
the tent to the awning. Assemble the tent poles (fiberglass pole in the
middle) and slide into the pole sleeve, insert the pin and ring into both
ends.Attach
the tent to the right/left side of the awning by locking the buckles and
straps onto the awning horizontal pole.
Assemble the tent poles (fiberglass pole in the middle)and slide into the pole
sleeve, insert the pin and ring into both ends.Clip the G hooks onto the pole, attach
the rainfly hook to the tent body, peg out all guy ropes and peg points.
DISASSEMBLY INSTRUCTION
Remove all pegs. Release the guy ropes and G hooks on the
tent.
Pull the pin out of the ends of both the steel poles. Disassemble the tent
pole and store them into the tent pole bag.![DUNE 4WD LP 70254 2m Awning Tent
- DISASSEMBLY 1](https://manuals.plus/wp-content/uploads/2023/09/DUNE-4WD- LP-70254-2m-Awning-Tent-DISASSEMBLY-1.png)Gently slide the beading out of the aluminum groove and release the tent body.Unlock the buckles and starps on the horizontal pole on the awning and release the tent body.Fold the tent body, roll it with the pole and pegs. Then pack them together into the carry bag.