DUNE HD Real Vision 4K User Manual
- June 6, 2024
- Dune HD
Table of Contents
DUNE HD Real Vision 4K
Interface
- Display
- 2 x Wi-Fi + Bluetooth antenna connector
- 12V DC inpu
- Ethernet 10/100/1000
- HDMI 2.0b output
- Optical S/PDIF output
- IR input (2.5mm minijack, T-R-S: 3.3V-IR-GND, L=11mm)
- A/V output (composite video + analog stereo audio)
- 2 x USB 3.1 host
- SD card slot
Package content
- Dune HD player
- Power supply
- HDMI cable
- IR extende
- Bluetooth remote
- 2 x AAA batterie
- 2 x Wi-Fi+Bluetooth antenna
- Quick Start Guide
Installation
-
Connect antennas to the connectors on the back of the Dune HD player
-
Connect your Dune HD Player to TV by HDMI-cable
-
Connect the power adaptor and switch the player on
-
Use Ethernet-cable (not included) to connect Dune HD player to the Internet (or use Wi-Fi)
-
Turn on the Dune HD player and TV. Choose the proper input on the TV
Remote
Remote must be paired to the player via Bluetooth before use :
- Direct remote to the player and press any button on the remote. The remote and the player will pair automatically.
- If the remote was already paired before, or in case of any problems: press and hold the “ENTER” and “V+” buttons on the remote for 3 seconds to put the remote into pairing mode. Use “Setup” / “System” / “Remotes & accessories” menu to unpair and pair the remote again.
-
POWER — turn the player on/off.
-
TV section (TV DOWN, TV UP, TV INPUT, TV POWER) — learnable buttons to control TV or other equipment (see “Using Remote to Control TV” section).
-
FAV1 ( ) — “ Recent” menu or user-defined function.
-
FAV2 ( ) — “Favorites” menu or user-defined function.
-
MIC ( ) — microphone / search.
-
Arrows ( ), ENTER, RETURN ( ), TOP MENU ( ),
POP UP MENU ( ), INFO ( i ) — main buttons for controlling the player (navigate across the items on the screen, open/use the currently selected
item, go back to the previous screen, go to the main menu, show/hide popup menu with actions for the currently selected item or the current player state, show/hide information about the currently selected item or the current player state, control some other player functions). -
MUTE ( ) — turn the sound on/off.
-
AUDIO (AUD), SUBTITLE (SUB) — toggle audio tracks and subtitle tracks.
-
MOUSE ( ) — toggle mouse mode (air mouse).
-
PLAY/PAUSE ( ), STOP ( ) — control the playback and some other
player functions. -
V+/V- (volume up / volume down) — adjust the volume.
-
P+/P- (page up / page down) — scroll up and down in various lists, switch to the next/previous TV channel, control some other player functions.
-
0–9 — enter numbers and text; control some other player functions.
-
CLEAR — delete the last entered character, delete the currently selected item, control some other player functions.
-
SELECT — switch text input mode, add the item to the selection list, control some other player functions.
-
A (Red), B (Green), C (Yellow), D (Blue) — control various player
functions.
NOTE: Button support and functions depend on particular applications. Not all apps support all buttons.
Using Remote to Control TV
You can program 4 learnable buttons (located in “TV” section: “TV DOWN”, “TV UP”, “TV INPUT”, “TV POWER”) to control your TV or other equipment:
- Press and hold the “TV UP” and “TV DOWN” buttons on the remote for 3 seconds. LED –
- Press one of 4 learnable buttons on the remote. LED
- Place your remote and the other remote on a table so that the IR emitters of both remotes are directed towards each other and are at a distance of about 1 cm
- Press and hold a button on the other remote until the LED indicator on your remote stops blinking. This means that the button learning is complete
- Learn other buttons the same way if needed (repeat steps 1-4).
Reset Remote to Factory Defaults
Press and hold “ENTER” and “TOP MENU” buttons on the remote for 3 seconds
More information on functions of the remote: Dune-HD.com/support/rcu
www.Dune-HD.com/support | Support@Dune- HD.com