ISOLED W5 WiFi PWM Dimming Controller Instructions
- June 3, 2024
- ISOLED
Table of Contents
ISOLED W5 WiFi PWM Dimming Controller
Product Introductions
W series LED controller can experience dimming, color temperature, RGB, RGBW, PWM dimming, and addressable light bar control, to meet the different needs of customers; Through the mobile App, you can adjust the color and brightness, select the special effects of lighting, adjust the speed and intensity of special effects, switch timing, and save and apply the scene.
Dimensions(mm)
Operation Instructions
Controller matches app: Only after the controller enters the pairing mode
can it be matched with the app.
Match: After the controller is installed, the indicator is white and the
green network indicator is blinking, indicating that the controller is in the
network configuration state.
Rematch: Press the RESET button for 3S to RESET the network and other
configurations. RESET the color of the rear light bar to a white breathing
state and the green network indicator to a blinking state. At this time, you
can RESET the network for the controller through App.
Controller Component Description
App operation
Download:
AddController:
Click the “Add Device” button to add the controller (note: controller must be connected to power supply, green network status indicator blinks)
Confirm that the current mobile phone is connected to WiFi, and the App will automatically fill in the WiFi connection to the current mobile phone, you need to manually enter the password, click the connect button (note: 5GHz WiFi is not supported)
Confirm that the mobile phone is connected to the same network as the controller and click Search device. After finding the device, click Finish to return to the home page and click the bound controller to enter the operation panel page.
Operation interface:
Function display of operation panel
Choose colors:
There is a small circle in the palette, drag the small circle to mix the color.
Colour temperature adjusting:
The color temperature adjustment belt can adjust the color temperature. The yellow side is a warm color, and the blue side is a cold color. After selecting the white light channel, the adjustment effect will be the best under the white light.
Dominant color:
You can choose 3 colors for the primary color, the first color is the primary color, and the other two colors are the secondary colors. Selecting the primary color and the secondary color can affect the color effect of the palette. The eraser function on the right side can eliminate the colors of 2 and 3. etc. ****
color palette:
The palette can be adjusted to match the colors of some special effects.
Effects:
The special effect can change the dynamic effect of the light bar. When the special effect is selected, a small green dot will appear in the upper right corner of the button, indicating that the special effect is selected.
Luminance:
You can adjust the brightness of the current light bar by clicking the brightness adjustment strip. Sliding is supported (not recommended, as command sending may fail). When you click or slide, the percentage of the current brightness is displayed.
Speed:
Click the speed adjustment belt to adjust the running speed of the current
special effect. Sliding is supported (not recommended, command sending may
fail). When clicking or sliding, the percentage of the current special effect
speed will be displayed.
Light intensity:
Click intensity is adjustable, and can adjust the strength of the current
special effects, special effects that effects the color contrast intensity,
when the intensity of low effects tend to be a kind of color, special effects
when high strength high color contrast, sliding support (not recommended, may
cause the failure of commands sent), click or sliding operation, the
percentage of the above will display the current intensity of special effects.
White light channel:
When the light bar type is set to RGBW, this adjustment strip will be
displayed. Click to adjust the brightness of the white light channel. Sliding
is supported (not recommended, which may cause command sending failure).
Add the preset:
Add preset, click Save preset, enter preset name, click OK, the saved preset
will be viewed and selected in the preset list.
Change the default:
Switch the preset, click the preset name or the single box in front of the
preset name to select the desired lighting effect; Delete presets, click the
Delete button to delete presets
Settings:
Setting Basic Information
Timing setting: set the opening and closing time of the light bar
Network Settings page, the replacement of WiFi can be modified here
Property:
Basic information: After clicking the button to restart the App, the button
text will be displayed as: Confirm to restart? The color is red. Click here to
confirm the restart and jump to the interface waiting for the APP to restart.
After the restart of the controller is completed in about 5S, the APP will
automatically jump to the control home page.
Technical Parameters
WiFi PWM dimming controller
Model| W5
Input Voltage| 5-24Vdc
Out Control| 5V PWM
Current Load| NC
Output Power| NC
Network Type| WiFi 2.4GHz
Working Temp| -40℃-85℃
Dimensions| L160xW40xH26(mm)
Packing| L165xW45xH30(mm)
Weight| 38g
Connection Diagram
Warning
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired op eration.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pu rsuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residential installation. This equipment generates, uses, and can radiate radio frequ ency energy, and if not installed and used in accordance with the instructions, may cause harmful interfer ence to radio communications. However, there is no guarantee that interference will not occur in a partic ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inte rference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>