SPECO AIPS03 Power Supply User Manual
- June 12, 2024
- Speco
Table of Contents
Power Supply User Manual_V1.0
AIPS03
Brief Introduction
This product is the Power Supply for the AIPK1 2-wire building intercom system.
Function
➢ Over-Voltage Protection
➢ Over-Current Protection
➢ Over-Heat Protection
➢ Short Circuit Protection
➢ Lightning Protection
Parameters
| No. | Name | Parameter |
|---|---|---|
| 1 | Input | Input Volt.Range |
| 2 | Input Current | 0.3A Max. |
| 3 | Input Freq.Range | 50/60Hz |
| 4 | No-Load Power Consumption | < 0.5W |
| 5 | Working Efficiency | 85% TYP |
| 6 | Output | Output Voltage |
| 7 | Output Current | 0.6A Max. |
| 8 | Protection | Over-Current Protection |
| 9 | Short Circuit Protection | Auto-recovery |
| 10 | Over-Heat Protection | 100°c±10°C shutdown |
| 11 | Lightning Protection | L-N: 1KV |
| 12 | Environment | Working Temp |
| 13 | Storage Temp | -20°C-70°C |
| 14 | Working & Storage Humidity |
-
Dimension Diagram
Dimension(L×W×D): 59×90×49.5 mm -
Instruction
Wiring:
AC: L connect to live wire, N connect to neutral wire (Voltage input please
refer to ‘Parameters’);
Bus interface: BUS1 interface, DC30V exclusive power output, can be connected
to the indoor monitor and outdoor station(non-polarity).
LED Indicator:
Red light: Turns on while it’s working; flashes while bus line is over-current
or short circuit.
Installation
| Step 1: Fix DIN rail (Fasten DIN rail with screws horizontally on the wall)
---|---
| Step 2: Align the power supply at the upper part of DIN rail, rotate and
press the lower part to fasten it to the rail after a popping sound.
Complete installation to DIN rail
● Caution
- Keep devices away from strong magnetic field, high-temp and humid environment.
- DO NOT drop the device to the ground, as any hard impact can cause damage.
- DO NOT use wet cloth or chemicals to clean the device.
- DO NOT disassemble the device.
- Avoid disposing metal part in ports to avoid electric shock.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>