WILLIAM OPTICS RedCat 61 Petzval Refractor Telescope Instruction Manual

June 15, 2024
WILLIAM OPTICS

WILLIAM OPTICS RedCat 61 Petzval Refractor Telescope

Warning
Never aim your telescope or finder scope at the Sun without proper Solar filters installed on the front of the telescope. Doing so for even a moment may permanently damage your vision. Proper Solar filters consist of filters made by reputable manufacturers, designed to fit tightly over the front of the dew shield. Solar with eyepiece filters are not considered safe, and should not be used. With proper front-mounted Solar filters, the telescope will not be harmed by viewing the Sun.

SPECIFICATION

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-1

  • Focal Length: 300mm (Astrograph)
  • Diameter: 61 mm
  • Aperture: f / 4. 9
  • Focuser: WIFD (WO INTERNAL FOCUS DESIGN) (Compatible with EAF)
  • Image Circle: 45mm full frame
  • Tube Length: 365mm
  • Dew Shield Circumference: 2 91 mm
  • Dew Shield Diameter: cp92mm
  • Weight: 5.431bs / 2.465kg (OTA only) 7.471bs / 3.390kg (OTA with ring, dovetail and saddle)

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-2 WILLIAM-OPTICS-RedCat-61
-Petzval-Refractor-Telescope-FIG-3

NOTE

We are utilizing a unique Petzval design featuring four optical elements in the William Optics (WO) Cat series telescopes. This design incorporates the use of high-quality FPL-53 glass for superior optical performance. Before storing your telescope, it is crucial to allow it sufficient time to acclimatize to room temperature. Please ensure that the telescope is thoroughly dry, free of dew or moisture, before storing. This ensures the safety and longevity of the telescope’s components.
Always store the telescope in a consistent temperature and dry environment to prevent any potential damage to the optical elements. Remember to leave the tube uncovered and opened during the acclimatization period. As always, taking appropriate care of your telescope will ensure its optimal performance and extend its lifespan.

Back Focus

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-4

PACKAGE CONTENTS

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-5

  • A. Dust Cover with Bahtinov Mask
  • B. Dew Shield
  • C. Main Tube
  • D. Saddle Handle Bar
  • E. Camera Angle Rotation Device
  • F. Tilt Adapter (inside)
  • G. 210mm Vixen Style Dovetail Plate
  • H. Soft Carry Case

PARTS

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-6

  • A. Rear Dust Cap (M48)
  • B. Saddle Handle Bar
  • C. WIFD Focuser
  • D. Dew Shield
  • E. Lens Cover with Bahtinov Mask
  • F. Front Bahtinov Mask Cover
  • G. Mounting Rings / Knobs
  • H. Camera Angle Rotator
  • I. 210mm Dovetail
  • J. 2 Speed 10:1 Ratio Fine Knob
  • K. M4 Screw Holes for Finder Bracket
  • L. Locking Screws on Saddle Handle Bar (M4)
  • M. Camera Angle Rotation Locking Screw
  • N. M6 Screw Holes for Finder Bracket
  • O. Focuser Adjusting Knob with Thermometer
  • P. M48 Adapter (for Camera Mount)

TELESCOPE DIAGRAM

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-7WILLIAM-OPTICS-RedCat-61
-Petzval-Refractor-Telescope-FIG-8 WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-9

R & P GEAR SPACING SCREWS

  • Adjustment Screws (3 mm Allen Key) – Pull Screw
  • Adjustment Screws (2 mm Allen Key) – Push Screw
  • Can be Removed to Attach the Electronic Motorized
    • Device such as EAF (Please refer to the instructions on page 13)
  • Tension Screw (Please refer to Note 2)
  • Do Not Touch

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-15

IMPORTANT NOTE

  1. The focuser smoothness adjustment ONLY when necessary by progressively pushing & pull screws until you reach the desired smoothness.
  2. When using the telescope with the motor, please ensure that the tension screw is not over-tightened. Over-tightening the tension screw may cause damage to the focuser.

Think of it like driving a car and pressing the gas pedal while also pressing the brake simultaneously. Just as this action could harm your car’s systems, over-tightening the tension screw could compromise the functionality of your telescope’s focuser.

OPERATION GUIDE

Where Is the Tilt Adapter?

Step 1

  • Remove the rotator knob.

Step 2

  • Twist the cover.

Step 3

  • The tilt adapter is inside.

Step 4

  • Remove the cover when you need to adjust it.

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-19

Step 5

  • How to adjust the tilt adapter.

How to Install EAF

Step 1

  • Remove the top screw with a 2mm Allen key.

Step 2

  • Release two inner knob screws.

Step 3

  • Remove the knob.

Step 4

  • Align the screw holes.

Step 5

  • Lock two set screws on the shaft.

Step 6

  • Tighten both bracket screws.

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-27

NOTE
Ensure proper alignment by loosening the mounting rings and adjusting the telescope on the mount to guarantee that both knobs on either side of the focuser are even and parallel to the mount to prevent any interference with the knobs impacting the mount’s saddle plate.

ACCESSORIES MAP

Cinematography

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-28

Astrophotography

WILLIAM-OPTICS-RedCat-61-Petzval-Refractor-Telescope-
FIG-29

Documents / Resources

| WILLIAM OPTICS RedCat 61 Petzval Refractor Telescope [pdf] Instruction Manual
RedCat 61, RedCat 61 Petzval Refractor Telescope, Petzval Refractor Telescope, Refractor Telescope, Telescope
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals