WILLIAM OPTICS ZS81 WIFD Widescreen Centre User Guide
- June 6, 2024
- WILLIAM OPTICS
Table of Contents
WILLIAM OPTICS ZS81 WIFD Widescreen Centre
Warning
Never aim your telescope or finder scope at the Sun without proper Solar filters installed on the front of the telescope. Doing so for even a moment may permanently damage your vision. Proper Solar filters consist of filters made by reputable manufacturers, designed to fit tightly over the front of the dew shield. Solar eyepiece filters are not considered safe, and should not be used. With proper front-mounted Solar filters, the telescope will not be harmed by viewing the Sun.
SPECIFICATION
- Focal Length: 559mm
- Diameter: 81mm
- Aperture: f/6.9
- Focuser: WIFD (WO INTERNAL FOCUS DESIGN) (Compatible with EAF)
- Image Circle : >Full Frame
- Retracted Length: 526mm
- Extended Length: 607mm
- Dew Shield Circumference: 382mm
- Dew Shield Diameter: @121 mm
- Weight : 7.82lbs / 3.545kg (OTA only) 10.05lbs / 4.560kg (OTA with ring, dovetail and saddle)
NOTE:
We are using a new lens cell design that includes FPL-53 glass in the WO two element designed APO refractor (Zenithstar series). This design is perfect for temperature compensation to better prevent pinched optics, that can occur in cold weather conditions. Before storing your telescope, you must leave it uncovered, with the tube opened for enough time to allow it to adjust to the room temperature. You must make sure the telescope is completely dry of any dew or moisture before it can be safely stored. The telescope should always be stored in a dry location, with a consistent temperature.
PACKAGE CONTENTS
- A. Dust Cover with Bahtinov Mask
- B. Main Tube
- C. 120mm Saddle Handle Bar
- D. Camera Angle Rotation Device
- E. M92 to M63 Adapter (for FLAT6AIII)
- F. 210mm Vixen Style Dovtail Plate
- G. Soft Carry Case
PARTS
- A. Rear Dust Cap (M63)
- B. 120mm Saddle Handle Bar
- C. WIFD Focuser
- D. Dew Shield Locking Screw
- E. Dew Shield
- F. Lens Cover with Bahtinov Mask
- G. Front Bahtinov Mask Cover
- H. M6 Screw Holes for Finder Bracket
- I. Camera Angle Rotator
- J. 210mm Dovetail
- K. 2 Speed 10:1 Ratio Fine Knob
- L. M4 Screw Holes for Finder Bracket
- M. Locking Screws on Saddle Handle Bar (M4)
- N. Camera Angle Rotation Locking Screw
- O. Mounting Rings / Knobs
- P. Focuser Adjusting Knob with Thermometer
- Q. M92 to M63 Adapter
TELESCOPE DIAGRAM
R & P GEAR SPACING SCREWS
IMPORTANT NOTE:
- The focuser smoothness adjustment ONLY when necessary by progressively push & pull screws until you reach the desired smoothness.
- When using the telescope with the motor, please ensure that the tension screw is not over-tightened. Over-tightening the tension screw may cause damage to the focuser. Think of it like driving a car and pressing the gas pedal while also pressing the brake simultaneously. Just as this action could harm your car’s systems, over-tightening the tension screw could compromise the functionality of your telescope’s focuser.
OPERATION GUIDE
ACCESSORIES MAP
Vistit W.O. webpage for details by Scanning the QR Code of the products