ELEMENT Enduro 12 Scale Ecto RTR Instruction Manual

: June 14, 2024
: Element

Table of Contents

ELEMENT Enduro 12 Scale Ecto RTR
Product Usage Instructions
ITEMS NEEDED
INTRODUCTION
ENDURO TRAIL TRUCK
FEATURES
HARDWARE
USING THIS MANUAL
QUICK START GUIDE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELEMENT Enduro 12 Scale Ecto RTR

Specifications

Brand: Element RC
Model: Enduro Trail Truck
Transmission: 3-gear with 13.98:1 ratio
Drivetrain: Low-friction slider-type driveshafts
Suspension: 4-link design with metal pivot balls
Motor: MT380 Reedy Power motor
ESC: FLYSKY 2-1 brushed electronic speed control
Receiver: Built-in LED lighting controller
Transmitter: 2.4GHz FLYSKY transmitter

Product Usage Instructions

Building the Enduro Chassis

Follow the assembly manual provided with the product for step-by-step instructions on building the Enduro chassis.

Maintaining Your Enduro Trail Truck

Regularly check and lubricate moving parts to ensure smooth operation. Refer to the maintenance section in the manual for detailed maintenance instructions.

Driving Tips

When driving the Enduro Trail Truck, ensure the battery is fully charged and the area is suitable for off-road driving. Practice different terrains to familiarize yourself with the handling of the vehicle.

FAQ

Q: What items are needed to build or maintain the Enduro Trail Truck?
- A: The required items include tools and components specified in the assembly manual. Other helpful items may aid in the building process but are not mandatory.
Q: How do I adjust the suspension of the Enduro Trail Truck?
- A: To adjust the suspension, refer to the suspension setup section in the manual. You may need to tighten or loosen certain components to achieve the desired suspension characteristics.
Q: Can I upgrade the motor of the Enduro Trail Truck?
- A: Yes, you can upgrade the motor following compatible specifications. Refer to the motor upgrade guide provided by Element RC for suitable replacement options.

Your journey begins here

ITEMS NEEDED

The following items are required to build or maintain your Enduro Trail Truck.

1.5mm Allen Wrench (#1500)
2mm Allen Wrench (#1501)
2.5mm Allen Wrench (#1503)
Pliers
Long Nose Pliers
5.5mm Nut Driver (#1507)
7mm Nut Driver (#1508)

OTHER HELPFUL ITEMS

The following items aren’t required but will aid in the building and maintenance of your Enduro Trail Truck.

Threadlock (#1596)
Green Slime (#1105)

INTRODUCTION

Thank you for purchasing this Element RC product. This assembly manual contains instructions and tips for building and maintaining your new Enduro chassis. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.

ENDURO TRAIL TRUCK

A performance rig built to endure. When hitting the trail, you want to do it with confidence and the answer is the Enduro12 Rock Crawler Trail Truck! Don’t let the small size fool you, the Enduro12 chassis is jam-packed with tons of features you’ll be glad to have out on the trail. At the heart is a 3-gear transmission with a 13.98:1 ratio and integrated motor mount. The forward- biased motor mount is designed to keep the weight over the front tires for better grip when climbing out on the rocks.

Feeding the power to the tires are a pair of low-friction slider-type driveshafts, metal front CVA drive axles, and metal ring and pinion gears. With the Enduro12 drivetrain, delivering useful power and torque will not be an issue. Utilizing a 4-link suspension design with metal pivot balls in the front and rear allows for the use of a Servo On Axle (SOA) steering setup. This, paired with metal steering links and pivot balls, allows for precise and direct control over the roughest terrain.

The Enduro12 Trail Truck comes ready for adventure right out of the box, with performance-driven electronics. The small but powerful MT380 Reedy Power motor supplies smooth and reliable power to the drive train. The FLYSKY 2-1 brushed electronic speed control (ESC) and receiver unit has a built-in LED lighting controller. Together with the 2.4GHz FLYSKY transmitter and Reedy Power servo, control will not be an issue when tackling the rocks.

With all this packed in one box, we know the Enduro12 Trail Truck is ready for the trail – Are you?

FEATURES

Metal front CVA system
Dual F/R option Battery placement tray with hook-and-loop hold-down strap
Realistic Scale 8 Hole Chrome wheels with soft compound off-road tires
4-link front and rear suspension
Fully adjustable, threaded, fl guide-filled shocks
Low CG servo Mounting position
13.98:1 ratio 3-gear transmission with integrated motor mount
Composite low-friction slider-type center driveshafts
Rubber-sealed ball bearing set
12mm Wide stance Aluminum wheel hexes
Durable Hi Torque mini Servo
Solid Front and Rear Axle

ELECTRONICS

2.4GHz All-in-one Flysky ESC, Transmitter and receiver system
850mah Li-Ion 7.4V 2-cell battery and charger
Reedy Hi-Torque brushed 380 motor
Reedy Power Hi-Torque Mini Servo

BODY FEATURES:

Thermoformed high-strength polycarbonate body
One-piece cab and bed design with fl ared fenders
Dropped bed design.
Injection-molded front bumper
Detailed grill and window decals

HARDWARE

HARDWARE 1:1 SCALE VIEW

HARDWARE USED WITH OPTIONAL REPLACEMENT PART NUMBERS

HARDWARE 1:1 SCALE VIEW

USING THIS MANUAL

This symbol indicates a special note or instruction in the manual.
This symbol indicates the number of the same part that is required.
This symbol indicates the order within a step to assemble parts.
This symbol indicates a Trail Tip.

This symbol indicates where Black Grease should be applied.
This symbol indicates where Green Slime can be applied. *not included

This symbol indicates where Thread Lock Adhesive should be applied. *not included

This symbol indicates where Shock Fluid should be applied.

There is a I:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

QUICK START GUIDE

GATE 01

Battery Charging Steps and Safety:

Remove the battery from the vehicle before charging. Place the battery on a fire-resistant surface.
Avoid any contact with water or other liquids. Be sure to select the correct charging mode for the type of battery you are charging (if applicable).
ALWAYS use a compatible charger for charging your batteries.

Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.

Caution : Always disconnect the battery when you are finished driving the vehicle.

GATE 02

Battery Installation:

Install the battery with the battery wires directed towards the front of the vehicle.
Secure the hook and loop strap.

You may move the foam pad to either the front or the rear of the battery compartment to adjust the weight balance of the vehicle.

GATE 03

YOUR BUILD BEGINS HERE

Battery Notes and Tip:

Connect the battery as shown.

Disconnect the battery when not in use!

LiPo/LiLo: LiPo/LiLo batteries (lithium polymer / Lithium Ion) are high- current rechargeable batteries. LiPo/LiLo batteries offer extended run time and peak performance over NiMH batteries. They require a peak detection charger designed specifically for LiPo/LiLo batteries.

These batteries require special care and handling.

LiPo/LiLo batteries are recommended for advanced users only!

ALWAYS charge a LiPo/LiLo battery in LiPo/LiLo mode.

GATE 05

Radio System Tuning and Controls:

RULE: Transmitter on First/Vehicle on Second,

Vehicle off First/ Transmitter off Last!

Slide the battery cover to remove the cover.
Install alkaline or rechargeable AA-size batteries into the battery holder.
Slide the battery cover back into place making sure it is completely closed and secure.
Turn the power ON. If the power indicator LED fails to light, check the batteries for insufficient contact or incorrect polarity

GATE 06

Radio System Tuning and Controls:

DO NOT hold the trigger when turning on the radio.
If using an optional battery for the transmitter, be sure to plug it in correctly. Plugging in a battery backward can cause damage.
Refer to the Radio owners manual for more in-depth instructions on radio operation and functions.

GATE 07

Install body and body clips.

Ready to go!

YOUR BUILD BEGINS HERE.

GATE 01 SHOCK BUILD

GATE 02 SHOCK BUILD

Shock Bleeding Steps:

Pull the shock shaft down.
Fill the shock body 3/4 full with silicone fluid.
Slowly move the shock shaft up and down to remove air from under the piston.
Wait for bubbles to come to the surface.
Fill the shock body to top with silicone fluid.
Place a drop of oil in the cap and on cap threads.
Install cap and tighten it partially.
Slowly compress the shaft all the way to bleed the excess silicone shock fluid out of the bottom of the shock cap (use a rag around the shock to catch excess fluid).
Tighten the shock cap until snug while the shaft is fully compressed.

Step 9

GATE 03 SHOCK BUILD

GATE 01 CHASSIS BUILD

GATE 01 FRONT AXLE BUILD

GATE 02 FRONT AXLE BUILD

GATE 03 FRONT AXLE BUILD

GATE 04 FRONT AXLE BUILD

GATE 01 REAR AXLE BUILD

YOUR BUILD BEGINS HERE.

GATE 02 REAR AXLE BUILD

GATE 03 REAR AXLE BUILD

GATE 01 GEARBOX BUILD