Acrox Technologies Co Ltd KB59 Wireless Mouse and Keyboard Combo User Manual

Acrox Technologies Co Ltd KB59 Wireless Mouse and Keyboard Combo

System Requirements

• Windows® 7/8/10/11 or later, macOS® 10.5 or later, Android™ Chrome OS™
• Available USB port or Bluetooth® on your laptop or computer

What’s in the Box

• 1 Wireless Mouse
• 1 AA battery
• 1 Wireless Keyboard
• 2 AAA batteries
• 1 USB nano receiver

Specification

Keyboard

• Full keyboard layout with 100 keys and built-in phone/tablet stand
• Compatible with tablets up to 13 in (33 cm) long and 0.41 in (1 cm) thick
• 14.79 in L x 7.47 in W x 0.87 in H (37.5 cm x 18.9 cm x 2.2 cm)

Mouse

• 3 clickable buttons with scroll wheel and 1600 DPI sensitivity
• USB nano receiver (stores in battery compartment when not in use)
• 4.41 in L x 2.39 in W x 1.27 in H (11.2 cm x 6 cm x 3.2 cm)|

Both

• 3 different wireless connection options available- 2 Bluetooth® channels and 1 2.4Ghz USB receiver
• Windows, MacOS, ChromeOS, Android, iOS compatible
• USB plug and play

Features

1. Left button

2. Right button

3. Scrolling wheel

4. LED indicator

5. USB nano receiver

6. Connect button

7. Battery cover

8. Easy-switch

9. ON / OFF switch

10. LED indicators

11. ON / OFF switch

12. Easy-switch keys

13. Phone / tablet stand

14. Battery cover

Press and hold Fn + F1 – F12 will perform as standard function keys

Installing the batteries

Insert the battery with the correct position according to the instructions labeled on the mouse and keyboard.

Switch Connection Channel
The mouse and keyboard can both connect up to 3 different devices by changing connection channels between USB nano receiver and 2 other Bluetooth channels.

Keyboard
Use “Easy-switch keys” to change connection channels.
The corresponding LED indicator will light up green when its channel is set. For example, when you press Bluetooth ( ) its LED indicator will light up.

Switch between different devices
For example, you can set USB nano receiver on laptop A Bluetooth on desktop B Rluetronth on tablet Cl then use “Easy-switch and Easy-switch keys” to switch connection between these 3 devices.

Connection Setup

Connect via USB nano receiver
These are plug and play with USB nano receiver Make sure to turn on power and set both the mouse and kevboard connection channels to  USB nano receiver . Plug USB nano receiver L into an available USB A port on your computer and start surfing onn.

Connect via Bluetooth in Windows
Turn on the mouse and keyboard setting them to either Bluetooth or Bluetooth .
Click on “Start” (bottom left corner on your screen) Go to Settings

• -> Device -> Bluetooth & other devices -> Turn on Bluetooth
• -> Add Bluetooth or other device -> Add a device (Bluetooth)

Keyboard

Press and HOLD “Easy-switch keys” to set keyboard in Bluetooth pairing mode. The corresponding LED indicator will start flashing green in pairing mode. Click on “onnKeyboard” in the list on your computer to setup pairing. LED will stop flashing and light up for 3 seconds when comolete..

Connect via Bluetooth in Mac
Turn on the mouse and keyboard setting them to either Bluetooth or Bluetooth .

• Click on “Apple menu” (top left corner of your screen)
• Go to System Preferences
• -> Bluetooth
• -> Turn Bluetooth on to set up Bluetooth device

Follow same steps as Connect via Bluetooth in Windows to set mouse and keyboard in pairing mode and complete Bluetooth pairing.

OS – Manual Selection

Keyboard will automatically detect your Operating System (OS) providing correct functions and shortcuts. To do this manually, select the proper OS by using the key combination above.

Low Battery
If LED starts blinking, you need to change battery.

Help with Setup

USB nano receiver
Mouse and keyboard are not working?

1. Are they powered on? Make sure both channels are set to .
2. Is the nano receiver securely plugged into a USB port? Try changing USB ports.
3. If the nano receiver is plugged into a USB hub, try plugging it directly into a USB port on your computer.
4. Check the orientation of the batteries inside.
5. Try a different surface. Remove metallic objects between the mouse (keyboard) and the nano receiver.

If it is still not working, try steps below to re-pair them with the nano receiver.

Mouse

• Re-plug receiver into USB port on computer, make sure channel is set to .
• Press connect button on mouse (keep mouse close to receiver).
• If it does not work after 10 seconds, repeat steps A and B.

Keyboard

• Re-plug receiver into USB port on computer. Make sure channel is set to .
• Press and hold “Easy-switch key” (keep keyboard close to receiver).
• If it does not work after 10 seconds, repeat steps A and B.

Press and hold this key until the corresponding LED indicator starts flashing green

Bluetooth® Mouse and keyboard are not working?

1. Are they powered on? Make sure both channels are set to ( or ). Make sure to turn on Bluetooth function on your computer.
2. Check the orientation of the batteries inside.
3. Try a different surface. Remove metallic objects between them and the computer.
4. Set them in pairing mode. Make sure they are discoverable on your computer and then complete pairing.
5. If it does not work after 10 seconds, repeat step 1 to 3.

Reconnection
Under Bluetooth connection (either Bluetooth 1 or 2) mouse and keyboard can automatically reconnect to their last connected computer. If it fails, you can always re-pair again.

Note The primary use case of the keyboard and mouse is for computers, (desktop, laptop and tablet computers), connecting to a smartphone is not recommended.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement : The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Before Use Notes:
All parts have to be unpacked and the packaging material has to be removed completely. Before use, verify the package contents are complete and undamaged.

BATTERY WARNING STATEMENT

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.

Need help? We’re here for you every day from 7 a.m. – 9 p.m. CST. Give us a call at 1-888-516-2630

We’d love to hear from you. Scan with your smartphone camera and let us know what you think.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>