AT T 06721 Qi2.0 Wireless Charging Convertible Stand User Manual
- June 15, 2024
- AT&T
Table of Contents
Qi2 certified
Compatible with wireless charging devices
One-year limited warranty
Qi2.0 Wireless Charging Convertible Stand
Wireless
Magnetic Convertible
Charging Stand
15W Qi2 Fast Charge
Power up so you Can power on **
**
Life moves fast, so we make it easy to keep moving. Charge your device up to
40% faster than a standard charger and keep up with every moment.
– Charges 40% faster on select devices than standard wireless chargers
– Compact design
– Convertible stand to enable charging device in portrait or landscape mode
– Qi2 certified
– Built-in magnetic alignment assist for iPhone 12 series and newer models
– Foreign Object Detection for added security
– One wall charger and USB-C™ cable included
– Input: S5VDC/3A; 9VDC/2.22A; 12VDC/1.67A
– Output: up to 15W
See inside for details about AT&T’s One-Year Limited Warranty and Warranty
Exclusions. All products impact the environment. For factors evaluated visit
att.com/ecospace.
© 2024 AT&T Intellectual Property. All rights reserved. Made in China
WARNING:
This product can expose you to chemicals including DEHP, DINP and BPA, which
are known to the State of California to cause cancer and birth defects or
other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Limited Warranty
One Year Limited Warranty. What is covered: AT&T warrants to the first retail
purchaser of this wireless accessory that should this product or any part be
proved defective in materials or workmanship, from the date of proof of
purchase for a period of one (1) year, then it will be subject to the terms of
this one year limited warranty. Such defects will be repaired, replaced or
credit issued at AT&T’s option, without charge for parts or labor directly
related to the defect. Limitations and Exclusions This warranty does not apply
to any cost incurred for removal or reinstallation, or to any product or part
thereof which has suffered through normal wear and tear, alteration, improper
installation, physical abuse, misuse, neglect or accident. Nor does it cover
defects caused by shipment to an AT&T service center, or repair or service of
the product by anyone other than an AT&T service center. Damage resulting from
an act of God, including but not limited to fire, flood, earthquake and other
natural disasters will be excluded. This limited warranty is in lieu of all
other warranties, express or implied either in fact or by operations of law,
statutory or otherwise, including, but not limited to any implied warranty of
merchantability or fitness for a particular use. AT&T does not authorize any
other person to assume any liability beyond the warranty herein described. In
no event, whether ased in contract or tort shall ATET be liable for
incidental, consequential, indirect, special, or punitive damages of any kind
resulting from the use of this product, including interrupted or incomplete
phone calls, or arising out of any breach of this warranty. In no event shall
AT&T be liable for damage in excess of the purchase price. AT&T and the AT&T
logo are registered trademarks of AT&T Intellectual Property. Other
manufacturer warranties may apply.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, maybe cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different form that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure warnings: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
AT &T 4-Star Eco-Rating att.com/ecospace
Packaging is 100% recyclable
Proof of Purchase G006519R00
Documents / Resources
| AT T
06721 Qi2.0 Wireless Charging Convertible
Stand
[pdf] User Manual
06721 Qi2.0 Wireless Charging Convertible Stand, 06721, Qi2.0 Wireless
Charging Convertible Stand, Wireless Charging Convertible Stand, Charging
Convertible Stand, Convertible Stand, Stand
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>