STRYTEN ENERGY SE2032 Typical Li600 Lithium Battery Instruction Manual
- June 14, 2024
- STRYTEN ENERGY
Table of Contents
STRYTEN ENERGY SE2032 Typical Li600 Lithium Battery
FAQ
- Q: How do I know if my battery is charging correctly?
- A: You can monitor the charging status through the display interface. Ensure that the charging plug is connected to the charger during charging, and check for any error codes that may appear on the display.
- Q: What should I do if the safety valve is triggered?
- A: If the safety valve releases internal pressure due to an accident of cells, immediately disconnect the battery from any power source and contact customer support for further assistance.
Product Description
TYPICAL Li600 LITHIUM BATTERY
Info: YOUR BATTERY MAY VARY FROM ABOVE DUE TO MOST OF BATTERIES ARE CUSTOMIZED.
| Item | Description | Function |
|---|---|---|
| 1 | Display with Switch & Buzzer | Monitor of battery status / Power on/off |
battery / Alarm when fault
2| Discharging plug| Connected to truck and power goes through
3| Battery tray| The container of battery modules and electrical components
4| Display communication cable| Display power and data cable
5| Calibration CAN| CAN port for checking and updating BMS data or firmware
6| Charging CAN| CAN port for communication between BMS and charger
7| Charging plug| Connected to charger during charging
8| Safety valve| A mechanical valve to release internal pressure when there is
an accident of cells
9| Antenna| To strengthen the signal telematics module of BMS
POWERING THE BATTERY ON AND OFF
Color Touch Screen
Monochrome LCD
Power on
- Ensure the display is connected to the display communication port on the battery. Press the switch button on the display box to power on the battery.
- If no fault is detected by the battery management system (BMS), the discharge contactor will close and power will be available from the battery.
- If a fault is detected, an error code will appear on the display. Please refer to the maintenance manual for error codes and troubleshooting.
Power off
- Press the power switch for three seconds to turn off the battery.
Language selection
- Select button to enter ‘Setting’ interface.
- Language selection. Chinese or English.
- Brightness of screen is also adjustable.
Contact
STRYTEN ENERGY
- USA/PR 877.462.4636
- CAN 800.268.2698
- MEX +52 5543527927
©2024 Stryten Energy Alpharetta, GA 30005